Month: July 2020
Rotary Table 4 or 100mm For Milling Machine 3 slot Tilting Premium Quality
BET(BAANI ENGINEERING TOOLS) offers. Precision Mini Rotary Table 4 Inch or 100 mm is manufactured from Seasoned casting. Vertical center Height : 2-1/16. Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. In 3 Slots so you can put you Chuck on its easily. 3 T Slots for fixing work to easily clamp chucks. Can be used both Vertically & Horizontally. A Precision work positioning device used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Rotary tables are most commonly mounted “flat”, with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it “flat” on a 90° angle plate), so that it rotates about a horizontal axis. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. The item “Rotary Table 4 or 100mm For Milling Machine 3 slot Tilting Premium Quality” is in sale since Monday, July 20, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “baani_pk” and is located in Delhi, Delhi. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Brand: Unbranded
4D Rotary 16 Lines Self Leveling Laser Level Green Bean Horizontal Vertical Kit
Features: 4D 360° Laser Line : Two 360° horizontal and two 360° vertical lines provide all-around leveling coverage in floor, wall, ceiling all around the room. 4D 16 line laser wire fine positioning, 4/8/12/16 line can be adjustable. Self-Leveling Alarm : LCD Display, 10m remote control, ±3° self-leveling system. The laser level will flash and beep continuously when beyond auto leveling range. Wall sticker 360° no dead angle. Power Saving : High brightness green beam is visible in the sun which is brighter than standard red beams. The service time can be extended to nearly 8 hours with 4000mAh rechargeable battery (charger is included). Easy To Install : Strong magnetic wall bracket, 1/4″ and 5/8″ mounting thread is provided to meet different fixing methods. Equipped with 360° lifting platform base, shockproof & shatter-proof, the height is adjustable from 0.98 to 3.54 inch. Wide Application : Horizontal / vertical lines can be selected individually or simultaneously depends on job site applications. You can switch it via remote controller or touch button. Ideal for auxiliary tiles fixing, wall decoration, floor tiles fixing, stair handrails, etc. Specifications: – Light Color: Green – Laser Light: 16 Line, 4x 360° – Lifting Platform: 25-90mm – Remote Control Distance: 10M – Beam Light Wavelength: ±532nm. Or it depends(except US). Hope you can wait some more days. Thank you very much. We will make every effort to make your shopping the most pleasant and wonderful! We will do best to solve it. If Weekends or holidays, we’ll reply within 48 hours. Will do best to solve problem. 4D 16 Lines / 360° Horizontal Vertical / ±3° Self-Leveling / 4000mAh Rechargeable Battery / LCD Display / Remote Control / Lifting Platform / Magnetic Wall Bracket / 1/4″ 5/8″ Mounting Thread. The item “4D Rotary 16 Lines Self Leveling Laser Level Green Bean Horizontal Vertical Kit” is in sale since Friday, April 10, 2020. This item is in the category “Home & Garden\Tools & Workshop Equipment\Measuring & Layout Tools\Laser Measuring Tools”. The seller is “maycity123″ and is located in Shenzhen. This item can be shipped worldwide.
- Type: Line Laser Level
- Features: 360 Tilt Sensor
- Color: Orange,Black
- Laser Light: 16 Line, 4x 360°
- Remote Control Distance: 10M
- Horizontal / Vertical Accuracy: ±0.2mm / 10mm
- Working Range: Up to 30m
- Continuous Operating Time: About 8 hours
- Brand: Universal
- Measuring Technology: Laser
- MPN: Does Not Apply
- Light Color: Green
- Lifting Platform: 25-90mm
- Beam Light Wavelength: ±532nm, <1mW
- Self-Leveling Range: ±3°
- Green Light Operating Temperature: -20~70
- Battery Capacity: 4000mAh (Built-in)
- UPC: 889251493775
3 Inch Rotary Table 4 Slots with 65mm Lathe Chuck & M6 Clamping kit
3 Inch Rotary Table 4 Slots with 65mm Lathe Chuck & M6 Clamping kit. Height – 38 mm. Ratio – 38:1. Gear mesh adjustment, the zero dial is marked in 10 min. Table scale is calibrated in 5 degree increments. Supplied with 3 rotary table, 65 mm chuck. The Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “3 Inch Rotary Table 4 Slots with 65mm Lathe Chuck & M6 Clamping kit” is in sale since Friday, August 30, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “loyaltoolsinc” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Unbranded
Rotary Table 80 mm 3 in 4 Slot With 50 mm Mini Lathe Chuck And Rotary Vice 80 mm
Rotary Table 3 Inch with 50 mm Chuck. 3 Rotary Table Horizontal & Vertical. Table graduated 360 degrees, Nice smooth rotation. Vertical centre height 44 mm, in 4 Slots. Regular 80 mm horizontal/ vertical Rotary Table complete. One turn = 10 degrees. Supplied with 50 mm Self Centering Chuck & 80 mm Backplate. Contra rotating rapid jaw adjustment mechanism. Quality 3 jaw self centering chuck 50 mm Diameter. Supplied complete with a key as well as set of tee nuts and studs to secure it into place. Backplate is drilled and counterbored to fit a range of 3 and 4 rotary tables with 3 Slots or a 4 Slots. Backplate Threaded: 12 x 1. Rotary Vice 3 Inch. Made from High Grade Casting. For Rotary Table & Vertical Slide. Fits To 3 And 4 Inch Rotary Table. 54 mm Wide Jaw / 20 mm Depth / 30 mm Opening / 30 mm Height. To Hold Round Objects jaws has V-Grooves. Comes Complete With Clamping Nuts. The item “Rotary Table 80 mm 3 in 4 Slot With 50 mm Mini Lathe Chuck And Rotary Vice 80 mm” is in sale since Saturday, February 15, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “machinetoolsindia” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Tilting: No
- Backplate Thread: 12 x 1
- Backplate Size: 80 mm
- No. of Slots: 4
- No. of Jaws: 3
- Table graduated: 360 degrees
- One turn: 10 degrees
- Bundle Listing: No
- Table Graduates: 360 Degree
- Chuck Type: Self Centering Chuck
- Operation: Manual
- MPN: RTRVMC80
- Chuck Soze: 50 mm
- Model: Regular 3 in
- Cross-Slide: No
- Brand: European Machinery
Rotary Table 4/ 100mm Horizontal and Vertical & 65mm 3 Jaw Chuck free shipping
Rotary Table 4/ 100. Table Dia:- 4/100mm. T-Slot :- M 6. Gear Ratio:- 36:1. Weight :- 5 Kgs / 13.2 Lbs. Precision ground horizontally and vertically. Graded cast iron and precision ground. The work table is graduated to full 360°. The 3 jaw chuck has a big range clamping. Uses of Rotary Table. A rotary table is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed (usually horizontal or vertical) axis. A rotary table can be used, To drill equidistant holes on a circular flange, To cut a round piece with a protruding tang, create large-diameter holes, via milling in a circular toolpath, on small milling machines, to cut straight lines & cut arcs at any angle. To hold onto a tool or work piece. Because they most often have three jaws, the term three-jaw chuck without other qualification is understood by machinists to mean a self-centering three-jaw chuck. The term universal chuck also refers to this type. These chucks are best suited to grip circular or hexagonal cross-sections when very fast, reasonably accurate & centering is desired. Self-centering three-jaw chuck and key with one jaw removed and inverted showing the teeth that engage in the scroll plate. The scroll plate is rotated within the chuck body by the key, the scroll engages the teeth on the underside of the jaws which moves the three jaws in unison, to tighten or release the workpiece. Term & Conditions. Of item can be vary depend upon availability. Mm Horizontal and Vertical + 65mm 3 Jaw Chuck. The item “Rotary Table 4/ 100mm Horizontal and Vertical & 65mm 3 Jaw Chuck free shipping” is in sale since Tuesday, February 4, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “easystreet_hangout” and is located in DASNA, UTTAR PRADESH. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal
- Tilting: No
- Chuck Size:: 80mm
- Table Dia:: 100mm
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Unbranded
Lathe Tailstock For Rotary Table With Indexing Plates For HV4 And HV6 Rotary Tab
The Set is Suitable for Rotary Table HV4 & HV6. HOLE PLATE A: 15, 16, 17, 18, 19, 20. HOLE PLATE B :21, 23, 27, 29, 31, 33. HOLE PLATE C: 37, 39, 41, 43, 47, 49. Set of 3 Plates. Made up of good Quality Cast Iron. Adjustable Height from 80 mm to 110 mm. It is used on our HV4 & HV6 ROTARY TABLE. It is used when between center work is required. These are adjustable for different heights and having fine. The item “Lathe Tailstock For Rotary Table With Indexing Plates For HV4 And HV6 Rotary Tab” is in sale since Saturday, February 15, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “machinetoolsindia” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Adjustable for: Different heights and having fine.
- Tailstock for Rotary Table: HV4 and HV6
- Adjustable Height from: 80 mm to 110 mm
- HOLE PLATE A: 15, 16, 17, 18, 19, 20
- HOLE PLATE B: 21, 23, 27, 29, 31, 33
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- HOLE PLATE C: 37, 39, 41, 43, 47, 49
- Set is Suitable for: Rotary Table HV4 & HV6
- No. of Plates: 3
- Made up of: Good Quality Cast Iron
- Operation: Manual
- MPN: TSFRTAWIP-2
- Brand: European Machinery
Rotary Table 4 or 100mm For Milling Machine 3 slot Tilting Premium Quality
Precision Mini Rotary Table 4 Inch or 100 mm is manufactured from Seasoned casting. Vertical center Height : 2-1/16. Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. In 3 Slots so you can put you Chuck on its easily. 3 T Slots for fixing work to easily clamp chucks. Can be used both Vertically & Horizontally. A Precision work positioning device used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Rotary tables are most commonly mounted “flat”, with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it “flat” on a 90° angle plate), so that it rotates about a horizontal axis. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. We ensure the product reaches you at the earliest. The item “Rotary Table 4 or 100mm For Milling Machine 3 slot Tilting Premium Quality” is in sale since Tuesday, July 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial-tools” and is located in Jhilmil Industrial Area Delhi. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: Yes
- MPN: Does Not Apply
- Brand: Unbranded
Indexing 4100 MM Rotary Table Horizontal Vertical+ T Nut Bolts+80 MM Round Vice
4 (100 mm) Rotary Table Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. DETAILS OF ROUND VICE. 80 mm Round Vice – Made of high grade close grain caste Iron. Designed to fit our 3″ (75 mm) & 4″ (100 mm) Rotary Tables. The moving jaw has V-grooves to hold Round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Diameter of Base : 80 mm. Jaw Width : 54 mm. Jaw Depth: 20 mm. Jaw Opening : 32 mm. The item “INDEXING 4100 MM ROTARY TABLE HORIZONTAL VERTICAL+ T NUT BOLTS+80 MM ROUND VICE” is in sale since Tuesday, June 12, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tools4every1″ and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- Bundle Listing: No
- Country/Region of Manufacture: India
- MPN: Does Not Apply
- Brand: Unbranded/Generic
VERTEX HV-12 12 Horizontal / Vertical Rotary Table with Face Plate
VERTEX HV-12 12 Horizontal / Vertical Rotary Table with Face Plate. HV-12 In wooden crate. If You have any questions regarding this item, please let us know we’ll be happy to help. The item “VERTEX HV-12 12 Horizontal / Vertical Rotary Table with Face Plate” is in sale since Tuesday, July 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped to United States.
- Brand: VERTEX
- MPN: HV-12
- Country/Region of Manufacture: Taiwan
- Manufacturer: VERTEX
- Model: HV-12