controller
HAAS Servo Controller 120 Volts AC 1 Phase 50/60 Hz 12 AMP with Rotary Table
HAAS Automation Servo Controller. Power requirement: 120 VAC, 15A, 1-Phase, 50/60Hz. Store up to 10 programs. Program up to 99 commands, and loop each command up to 999 times. Program angles from. 001 degree to 999.999 degrees. Operates on 120 VAC power. Allows Haas rotary products to be used on non-Haas machine tools. HAAS Rotary Table HRT210SP Medium Rotary. Platter Diameter: 8.30 in. Max Weight on Platter (w/support) 170lb. Max Weight on Platter (unsupported) 85lb. Max Speed: 100 °/sec. Max Torque: 210 ft-lbf. Runout Max: 0.0005 in. Center Height: 6 in. Gear Ratio: 90:1. Accuracy: +/- 15 arc-sec. Repeatability: 10 arc-sec. Resolution: 0.001°. Worm Gear Dia: 6.3 in. Max Rotation/Step (with rotary control): 999.999°. Please feel free to reach out with any questions you may have. I will do my best to answer your questions and can provide more pictures if need be. Priced low to sell fast. I have so much I can’t keep up with posting them.. Thank you for your interest and support.
Tsudakoma 12-1/2 Hor/Vert Circular NC Rotary Table RNCV-300R withJib & Controller
Tsudakoma Horizontal/Vertical Circular NC Table Model #: RNCV-300R M/C No: 206278 Table Diameter: 12-1/2” Controller Horizontal or Vertical mounting 8-1/4″ Center Height (Horizontal) 7-3/4″ Height (Vertical) Rotary Table Driven By: Fanuc Servo Motor There is No Servo Amplifier with Unit Weight of Unit – 405 lbs (w/ Skid – 425 lbs) Budgit Jib Arm and Trolley mounted to 4-wheel cart for Convenient transfer to Machine. One connector will need to be repaired due to damage in transport. SPEC’S SUBJECT TO FINAL INSPECTION. WE STRIVE TO MAKE EVERY. IF WE HAVE NOT DONE SO, PLEASE LET US KNOW WHAT WE NEED TO DO THAT’LL ENABLE YOU TO PROVIDE. WE’LL DO OUR VERY BEST TO MAKE IT SO!
Haas HRT160 Servo Rotary Table With Stand Alone Controller
Haas HRT-160 CNC rotary index table with stand alone controller. Can be linked hooked directly to the CNC, or a signal sent to controller saying CNC is in position and safe for table to move or index, or used on a conventional milling machine like a manual index table would be only you don’t have to manually crank a handle and look at a dial. It’s been lightly used in a small shop. No cuts nicks or problems with the cables.
Yuasa DMNC / DMTRT controller rotary table udnc-m1 5y3-603697-10x dmnc-22001
2012 used buttin perfect running condition. The table has surface rust where fixture was on it. Table will unbolt and can be ground if you wish.
Haas HRT-160 4th Axis CNC Rotary Table 8 Chuck with Servo Controller, 17-Pin
Haas HRT-160 4th Axis CNC Rotary Table 8 Chuck w/ Servo Controller, 17-Pin. INV 6586 Fresh from a closed machine shop. Watch the video, this unit operates as intended. There is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. This is not a satisfaction guarantee, I will only honor a return if we miss-listed the items or it does not function properly. If you have any questions please let us know. Get Supersized Images & Free Image Hosting. Create your brand with Auctiva’s. Attention Sellers – Get Templates Image Hosting, Scheduling at Auctiva. Com. Haas HRT 4th Axis Rotary Table.
2002 Haas HRT-160 4th Axis CNC Rotary Table with SCO1M Servo Controller, 17-Pin
2002 Haas HRT-160 4th Axis CNC Rotary Table w/ SCO1M Servo Controller, 17-Pin. INV 6585 Fresh from a closed machine shop. Watch the video, this unit operates as intended. There is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. This is not a satisfaction guarantee, I will only honor a return if we miss-listed the items or it does not function properly. If you have any questions please let us know. Get Supersized Images & Free Image Hosting. Create your brand with Auctiva’s. Attention Sellers – Get Templates Image Hosting, Scheduling at Auctiva. Com. Haas HRT160 4th Axis Servo Control.
2012 Yuasa DMNC-5C, 5C CNC Rotary Indexer with UDNC-M1 Controller Collet
2012 Yuasa DMNC-5C, 5C CNC Rotary Indexer w/ UDNC-M1 Controller Collet. INV 6611 This was recently removed from service. It was on a Sharp CNC Vertical we also have for sale. There are a couple boo-boo’s on the spindle nose, but otherwise will operate as intended. Yuasa DMNC-5C 5C Rotary Table with Yuasa UDNC-M1/5Y3-603697-10X Rotary Table Control Module Yuasa DMNC-5C is a Single spindle 5C rotary table. Stand alone M-Code style rotary table with 5C collet spindle nose. Rotary body features dual needle roller bearings and thrust spindle bearings. Small footprint and compact designed for small VMCs and CNC drilling tapping centers. There is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. This is not a satisfaction guarantee, I will only honor a return if we miss-listed the items or it does not function properly. If you have any questions please let us know. Get Supersized Images & Free Image Hosting. Create your brand with Auctiva’s. Attention Sellers – Get Templates Image Hosting, Scheduling at Auctiva. Com. Yuasa CNC Rotary Indexer.
Haas HRT160 Rotary Table 4th Axis Indexer 17 Pin Interface with Controller
Haas HRT160 Rotary Table 4th Axis Indexer 17 Pin Interface with Controller.
Haas Ha5c Rotary And Controller Brush
HAAS HA5C ROTARY AND CONTROLL BOX. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “aperitivi9″ and is located in this country: US. This item can be shipped to United States.
- Brand: Haas
- MPN: HA5C
- Operation: CNC
- Country/Region of Manufacture: United States
Tsudakoma 4th Axis 6 RZ-150R Rotary Indexer with TPC-Rz Controller Box
Tsudakoma 4th Axis 6 RZ-150R Rotary Indexer with TPC-Rz Controller Box. Used but works fine. Could use some TLC/ clean and grease. Uses 220v and Air. Currently has a 5C collet and chuck on it that will come with it. Can mount 3 or 4 jaw vices or other sized collets with attachments. For use inside a CNC or even manual mill. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “jarewardl_0″ and is located in this country: US. This item can be shipped to United States.
- Brand: tsudakoma
- MPN: 5C
- Setting Position: Horizontal/Vertical
- Operation: CNC
- Country/Region of Manufacture: Japan