80mm
Rotary Table 3 80mm Horizontal Vertical + 65mm 3 jaw self centering chuck Atoz
Table Height: 1 5/8. Center Height in Vertical Position: 1. Operates in the Horizontal or Vertical position. Hand Wheel calibrated to 10 degrees per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. Supplied complete with a key as well as set of tee nuts and studs to secure it into place. Quality 3 jaw self centering chuck 65mm Diameter with 14x1mm Thread. Contra rotating rapid jaw adjustment mechanism. Backplate is drilled and counterbored to fit a range of 3″ and 4″ rotary tables with 4 Slots. Rotary tables are most commonly mounted “flat”, with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it “flat” on a 90° angle plate), so that it rotates about a horizontal axis. In this configuration a tailstock can also be used, thus holding the work piece between centers. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. Milling :Milling curved profiles and angled faces relative to a centre line. Drilling or milling to polar co-ordinates and, when mounted vertically with a tailstock they can be used to machine shafts or spindles. The versatile units can also be used on drilling, boring or slotting machines permitting an even greater range of operations. Machining – To establish the initial work piece position simply loosen the zero Collar locking handle and rotate the zero collar anti-clockwise for about half A turn. The worm is now disconnected from the worm wheel drive, the table is Free to turn independently to the crank handle and the work piece may now be Accurately aligned. To re-engage simply turn the zero collar in the clockwise Direction and re-tighten the locking handle. Rotary table can be used for. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “atoz-outils” and is located in this country: IN.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- Model: RT-3 65mm chuck
- Brand: Atoz
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 ROTARY TABLE WITH 80mm ROUND VICE, TAILSTOCK & CLAMPING KIT. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max) : 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″, Rotary Table 3″ Tilting, Rotary Table 4″, Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. DESCRIPTION FOR 80mm ROUND VICE. Vice Diameter of Base: 3 (80mm). Vice Jaw Width: 2-7/16 (62mm). Vice Jaw Depth: 3/4 (19mm). Vice Jaw Opening: 1-5/8 (27mm). Vice Height: 1-1/4 (31mm). Made of high grade close grained seasoned cast Iron. Fits our 3″ (80mm) & 4″ (100mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. These vices are counter- drilled in a manner that these can fit to a 3 as well 4 slot table. DESCRIPTION FOR CLAMPING KIT. Length Of Clamp : 2-1/2 (63mm). Width Of Clamp : 1 (25mm). Hole Of Clamp : 5/16 (8mm). Thickness of Clamp : 1/2 (13mm). Length Of Block : 1-1/2 (38mm). Width Of Block : 1 (25mm). Height Of Block : 1 (25mm). These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Includes 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. KIT INCLUDES : ROTARY TABLE + ROUND VICE + TAILSTOCK + CLAMPING KIT + T-NUTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in this country: IN. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal / Vertical
- Tilting: No
- Rotary Table Height: 1-5/8\
- Packing: Hard Board Box
- Free shipping To: USA, UK, Italy, Spain, France, Mexico
- Table Scale Graduated: 5 Degree
- Single Bolt Tailstock Suitable For: Rotary Table 3\
- Tailstock Dead Center Height (Min – Max): 1-7/16\
- Rotary Table Dia.: 3-1/8\
- Rotary Table Slots: 4
- Operation: Manual
- Vice Diameter of Base: 3\
- Vice Jaw Width: 2-7/16\
- Vice Jaw Depth: 3/4\
- Vice Jaw Opening: 1-5/8\
- Vice Height: 1-1/4\
- Rotary Table Hand Wheel Calibrated To: 10 degree per revolution
- Kit Includes: ROTARY TABLE, ROUND VICE, TAILSTOCK, CLAMPING KIT & T-NUTS
- Brand: AUZAAR
Rotary Table 3 80mm Horizontal And Vertical With 65mm 3 Jaw Chuck & Backplate
3 (80mm) Rotary Table + 3 Jaw. (65mm) Self Centering Chuck + Back Plate. Table graduated in 360 Degrees. The scale calibrated in 5 degree increment. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. 3 Jaw Self Centering Chuck (65mm) Dia. 65mm Self Centering Chuck 3 Jaw. Jaws are made of tool steel, hardened & ground. Body is made of graded cast iron. KIT INCLUDES : ROTARY TABLE + CHUCK + BACKPLATE + T-NUTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “workshoptools-2020″ and is located in this country: IN. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Brand: Unbranded
Rotary Table 3 80mm Horizontal Vertical Low Profile With Single Bolt Tailstock
3 ROTARY TABLE WITH SUITABLE SINGLE BOLT TAILSTOCK. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max) : 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″, Rotary Table 3″ Tilting, Rotary Table 4″, Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolsforexperts” and is located in this country: IN. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Operation: Manual
- Brand: RUTWIK ENGINEERS
3 INCH 80mm ROTARY TABLE WITH SUITABLE SINGLE BOLT TAILSTOCK AND BACKPLATE
3 ROTARY TABLE WITH SINGLE BOLT TAILSTOCK & BACKPLATE. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max) : 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″, Rotary Table 3″ Tilting, Rotary Table 4″, Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. KIT INCLUDES : ROTARY TABLE + TAILSTOCK + BACKPLATE + T-NUTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in this country: IN. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal / Vertical
- Tilting: No
- Rotary Table Slots: 4
- Rotary Table Hand Wheel Calibrated To: 10 degree per revolution
- Rotary Table Height: 1-5/8\
- Packing: Hard Board Box
- Free shipping To: USA, UK, Italy, Spain, France, Mexico
- Table Scale Graduated: 5 Degree
- Single Bolt Tailstock Suitable For: Rotary Table 3\
- Tailstock Dead Center Height (Min – Max): 1-7/16\
- Operation: Manual
- Rotary Table Dia.: 3-1/8\
- Kit Includes: ROTARY TABLE + TAILSTOCK + BACKPLATE + T-NUTS
- Brand: AUZAAR
Rotary Table 3 80mm Horizontal Vertical Low Profile With Single Bolt Tailstock
3 ROTARY TABLE WITH SUITABLE SINGLE BOLT TAILSTOCK. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max) : 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″, Rotary Table 3″ Tilting, Rotary Table 4″, Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolsforexperts” and is located in this country: IN. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Operation: Manual
- Brand: RUTWIK ENGINEERS
Rotary Table 3 80mm Horizontal Vertical Low Profile With Single Bolt Tailstock
3 ROTARY TABLE WITH SUITABLE SINGLE BOLT TAILSTOCK. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max) : 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″, Rotary Table 3″ Tilting, Rotary Table 4″, Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in this country: IN. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal / Vertical
- Tilting: No
- Rotary Table Slots: 4
- Rotary Table Hand Wheel Calibrated To: 10 degree per revolution
- Rotary Table Height: 1-5/8\
- Packing: Hard Board Box
- Free shipping To: USA, UK, Italy, Spain, France, Mexico
- Table Scale Graduated: 5 Degree
- Single Bolt Tailstock Suitable For: Rotary Table 3\
- Tailstock Dead Center Height (Min – Max): 1-7/16\
- Operation: Manual
- Rotary Table Dia.: 3-1/8\
- Brand: AUZAAR
3 Inch Rotary Table 80mm HV With Vice 80mm Round Vise & Single Bolt Tailstock
3 ROTARY TABLE WITH 80mm ROUND VICE & SINGLE BOLT TAILSTOCK. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max) : 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″, Rotary Table 3″ Tilting, Rotary Table 4″, Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. DESCRIPTION FOR 80mm ROUND VICE. Vice Diameter of Base: 3 (80mm). Vice Jaw Width: 2-7/16 (62mm). Vice Jaw Depth: 3/4 (19mm). Vice Jaw Opening: 1-5/8 (27mm). Vice Height: 1-1/4 (31mm). Made of high grade close grained seasoned cast Iron. Fits our 3″ (80mm) & 4″ (100mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. These vices are counter- drilled in a manner that these can fit to a 3 as well 4 slot table. SUPPLIED WITH FIXING T-NUTS & BOLTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in this country: IN. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal / Vertical
- Tilting: No
- Rotary Table Height: 1-5/8\
- Packing: Hard Board Box
- Free shipping To: USA, UK, Italy, Spain, France, Mexico
- Table Scale Graduated: 5 Degree
- Single Bolt Tailstock Suitable For: Rotary Table 3\
- Tailstock Dead Center Height (Min – Max): 1-7/16\
- Rotary Table Dia.: 3-1/8\
- Rotary Table Slots: 4
- Operation: Manual
- Vice Diameter of Base: 3\
- Vice Jaw Width: 2-7/16\
- Vice Jaw Depth: 3/4\
- Vice Jaw Opening: 1-5/8\
- Vice Height: 1-1/4\
- Rotary Table Hand Wheel Calibrated To: 10 degree per revolution
- Brand: AUZAAR
3 Inch Rotary Table 4 Slots With Vise 80mm Round Vice & Single Bolt Tailstock
3 ROTARY TABLE WITH 80mm ROUND VICE & SINGLE BOLT TAILSTOCK. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max) : 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″, Rotary Table 3″ Tilting, Rotary Table 4″, Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. DESCRIPTION FOR 80mm ROUND VICE. Vice Diameter of Base: 3 (80mm). Vice Jaw Width: 2-7/16 (62mm). Vice Jaw Depth: 3/4 (19mm). Vice Jaw Opening: 1-5/8 (27mm). Vice Height: 1-1/4 (31mm). Made of high grade close grained seasoned cast Iron. Fits our 3″ (80mm) & 4″ (100mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. These vices are counter- drilled in a manner that these can fit to a 3 as well 4 slot table. SUPPLIED WITH FIXING T-NUTS & BOLTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in this country: IN. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal / Vertical
- Tilting: No
- Rotary Table Height: 1-5/8\
- Packing: Hard Board Box
- Free shipping To: USA, UK, Italy, Spain, France, Mexico
- Table Scale Graduated: 5 Degree
- Single Bolt Tailstock Suitable For: Rotary Table 3\
- Tailstock Dead Center Height (Min – Max): 1-7/16\
- Rotary Table Dia.: 3-1/8\
- Rotary Table Slots: 4
- Operation: Manual
- Vice Diameter of Base: 3\
- Vice Jaw Width: 2-7/16\
- Vice Jaw Depth: 3/4\
- Vice Jaw Opening: 1-5/8\
- Vice Height: 1-1/4\
- Rotary Table Hand Wheel Calibrated To: 10 degree per revolution
- Brand: AUZAAR
Rotary Table 3 80mm Horizontal Vertical Low Profile With Single Bolt Tailstock
3 ROTARY TABLE WITH SUITABLE SINGLE BOLT TAILSTOCK. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max) : 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″, Rotary Table 3″ Tilting, Rotary Table 4″, Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “expert.tools” and is located in this country: IN. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Operation: Manual
- Brand: RUTWIK ENGINEERS