vice
Rotary Table 4/100 mm with Round Vice + T nuts- Milling Metalworking Machine
BEST COMBO OF 4 /100 ROTARY TABLE WITH A CASTE IRON ROUND VICE- FOR MILLING MACHINES. ROTARY TABLE’S Gear Ratio – 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees. ROTARY TABLE’S Base Dimensions: 4. 1/4″ 4 T-Slots: 5/16″. The item “Rotary Table 4/100 mm with Round Vice + T nuts- Milling Metalworking Machine” is in sale since Thursday, February 4, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tools-shop2020″ and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does not apply
- Brand: Unbranded
3” 80 mm Rotary table with ER-16 Collet Adapter M6 Clamp Kit Round Vice Tools
Set of 3 /80 mm Rotary Table along with A Round Vice, M6 clamp kit ER-16 Collet Adapter, Fixing T nuts & Suitable Tailstock. Total Height of the assembly (Table & ER Collet Adaptor) is approx 80 mm. Worm- Gear Ratio – 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees. The base plate of adaptor is M6 drilled in a manner that it can fit both 3 as well 4 slots table. The item “3” 80 mm Rotary table with ER-16 Collet Adapter M6 Clamp Kit Round Vice Tools” is in sale since Thursday, November 26, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “globaltools2016″ and is located in Delhi, Delhi. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
3 Inch Rotary Table H/V 4 Milling Slots With Tailstock And Vice 80mm Round Vise
3 ROTARY TABLE WITH 80mm ROUND VICE & SINGLE BOLT TAILSTOCK. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max) : 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. DESCRIPTION FOR 80mm ROUND VICE. Vice Diameter of Base: 3 (80mm). Vice Jaw Width: 2-7/16 (62mm). Vice Jaw Depth: 3/4 (19mm). Vice Jaw Opening: 1-5/8 (27mm). Vice Height: 1-1/4 (31mm). Made of high grade close grained seasoned cast Iron. Fits our 3″ (80mm) & 4″ (100mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. These vices are counter- drilled in a manner that these can fit to a 3 as well 4 slot table. SUPPLIED WITH FIXING T-NUTS & BOLTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. The item “3 Inch Rotary Table H/V 4 Milling Slots With Tailstock And Vice 80mm Round Vise” is in sale since Saturday, May 29, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal / Vertical
- Tilting: No
- Rotary Table Height: 1-5/8″ (44mm)
- Packing: Hard Board Box
- Free shipping To: USA, UK, Italy, Spain, France, Mexico
- Table Scale Graduated: 5 Degree
- Single Bolt Tailstock Suitable For: Rotary Table 3″ & 4″
- Tailstock Dead Center Height (Min – Max): 1-7/16″ (37mm) – 3-5/8″ (92mm)
- Rotary Table Dia.: 3-1/8″ (80 mm)
- Rotary Table Slots: 4
- Operation: Manual
- MPN: Does Not Apply
- Vice Diameter of Base: 3″ (80mm)
- Vice Jaw Width: 2-7/16″ (62mm)
- Vice Jaw Depth: 3/4″ (19mm)
- Vice Jaw Opening: 1-5/8″ (27mm)
- Vice Height: 1-1/4″ (31mm)
- Rotary Table Hand Wheel Calibrated To: 10 degree per revolution
- Brand: AUZAAR
ROTARY TABLE 3/75 MM WITH 3/75 MM ROTARY VICE horizontally & vertically
ROTARY TABLE 75 MM WITH 75 MM ROTARY VICE. 3 Inch (75 mm) Rotary Table’s is a Precision Small Rotary Table for Milling operation. Its Table Diameter is 3 or (75 mm) with 3 slots. Height – 47 mm. Worm- Gear Ratio – 36:1, which basically means that 1 handle rotation shall turn the table by 10 Degrees. Table graduated in 360 Degrees & the scale calibrated in 5 degree increment. Centre Height in Vertical position is 52 mm. Can be used in both horizontal & vertical position. This combination completes with our high grade close grain caste Iron. Fits our 3 (75 mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. The item “ROTARY TABLE 3/75 MM WITH 3/75 MM ROTARY VICE horizontally & vertically” is in sale since Tuesday, November 24, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Other CNC, Metalworking & Manufacturing”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- MPN: Does Not Apply
- Country/Region of Manufacture: India
- Custom Bundle: No
- Brand: Unbranded
Rotary Table 100 mm 4 Inch With Rotary Vice 100 mm With Horizontal And Vertical
ROTARY TABLE 4 Inch. Horizontal / Vertical Rotary Table. Table Diameter : 100 mm / 4 Inch. Vertical Centre Height 53 mm/. Table Graduated 0-360 Degrees. 4 Slot Rotary Table. Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. ROUND VICE 4 Inch. 100 mm Diameter Caste Iron Round Vise vice -Made from Close grain Caste Iron. Designed to fit our 4 (100 mm) Regular & tilting models of Rotary Table. Vice is counter drilled in a manner that it can fit to both 3 as well as 4 Slots Rotary Table. Diameter of Base : 105 mm Jaw Width : 75 mm Jaw Depth: 21 mm Jaw Opening : 40 mm Height : 32 mm. The moving jaw has V-grooves to hold Round objects. The item “Rotary Table 100 mm 4 Inch With Rotary Vice 100 mm With Horizontal And Vertical” is in sale since Friday, January 1, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “machinetoolsindia” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- MPN: RT4
- Setting Position:: Horizontal/Vertical
- Tilting:: No
- Rotary Table Size:: 100 mm
- Operation:: Manual
- Cross-Slide:: No
- Color:: Black
- Rotary Vice Size:: 100 mm
- Brand: European Machinery
3 round vice & 3(80mm) rotary table milling metal-cut. Free shipping
1: 3rotary table 1pcs. 2: 3 round vice 1 pcs. ROTARY TABLE -Table: 3. Diameter -Table Height: 1 5/8 -Base Dimensions: 4. 1/4 -Center Height in Vertical Position: 1. 11/16″ -T-Slots: 5/16″ -Operates in the Horizontal or Vertical position -Hand Wheel calibrated to 10 degrees per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increment ROUND VICE The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. The moving jaw has V-grooves to hold Round objects. Made of high grade close grain caste Iron. Fits our 3 (75 mm) Rotary Tables perfectly. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Diameter of Base : 80 mm Jaw Width : 54 mm Jaw Depth: 20 mm Jaw Opening : 32 mm Height : 29 mm. The item “3 round vice & 3(80mm) rotary table milling metal-cut. Free shipping” is in sale since Monday, March 16, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “easystreet_hangout” and is located in ghaziabad. This item can be shipped worldwide.
- Operation: Manual
- Modified Item: No
- MPN: Does Not Apply
- Country/Region of Manufacture: India
- Custom Bundle: No
- Unit Type: Unit
- Setting Position: Horizontal/Vertical
- Cross-Slide: No
- Tilting: No
- Unit Quantity: 1
- Brand: Unbranded
Rotary Table Horizontal Vertical Tilting 3, 4+ Chucks + 80 & 100mm Round Vice
3 / 80mm Rotary Table Horizontal Vertical 4 Slots. Table: 3 Diameter or 80mm. Table Height: 1 5/8. Center Height in Vertical Position: 1. Operates in the Horizontal or Vertical position. Hand Wheel calibrated to 10 degrees per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. 4 / 100mm Rotary Table Horizontal Vertical 4. Table 4 / 100mm manufactured for effective work. 4 T Slots for fixing work can be used with Clamping kit. Vertical Height 55 mm when table kept horizontal. Table graduated 0-360 degrees in 5 degree division. 4 / 100mm Rotary Table Tilting 4 Slots. Features to tilts between 0- 90 Degrees & can be locked at any position. Table diameter 100 mm. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation turns the table by 10 Degrees. Centre Height in vertical position: 2-5/8 (66 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. 50mm Lathe Chuck Self – Centering 3 jaw. Quality 3 jaw self centering chuck 50mm Diameter with. Contra rotating rapid jaw adjustment mechanism. 50mm Lathe Chuck Independent 4 jaw. 2 / 50mm LATHE CHUCK. 4 Jaw Independent Centering Chuck -Contra rotating rapid jaw adjustment mechanism. 1 Handle with 50mm chuck. 65mm Lathe Chuck Self – Centering 3 jaw. Quality 3 jaw self centering chuck 65mm Diameter with. 65 mm Lathe Chuck Independent 4 jaw. 4 Jaw Independent Centering Chuck. 1 Handle with 65mm chuck. Diameter of Base : 80 mm. Jaw Width : 54 mm. Jaw Depth: 20 mm. Jaw Opening : 32 mm. Made of high grade close grain caste Iron. The moving jaw has V-grooves to hold Round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Caste Iron 100 mm Round Vice for Rotary Table. Diameter of Base : 105mm Jaw Width : 80mm Jaw Depth: 21mm Jaw Opening : 40mm Height : 32. A Precision work positioning device used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Rotary tables are most commonly mounted “flat”, with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it “flat” on a 90° angle plate), so that it rotates about a horizontal axis. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. We ensure the product reaches you at the earliest. The item “Rotary Table Horizontal Vertical Tilting 3, 4+ Chucks + 80 & 100mm Round Vice” is in sale since Tuesday, February 11, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial-tools” and is located in Delhi, DL. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Tilting: Yes
- MPN: Does Not Apply
- Brand: Unbranded
Rotary Table 4/100 mm with Round Vice + T nuts- Milling Metalworking Machine
BEST COMBO OF 4 /100 ROTARY TABLE WITH A CASTE IRON ROUND VICE- FOR MILLING MACHINES. ROTARY TABLE’S Gear Ratio – 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees. ROTARY TABLE’S Base Dimensions: 4. 1/4″ 4 T-Slots: 5/16″. A +40 YEARS OLD MANUFACTURING COMPANY. The item “Rotary Table 4/100 mm with Round Vice + T nuts- Milling Metalworking Machine” is in sale since Wednesday, November 25, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “globaltools2016″ and is located in Delhi, Delhi. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
Rotary Table 80 mm 3 in 4 Slot With 50 mm Mini Lathe Chuck And Rotary Vice 80 mm
Rotary Table 3 Inch with 50 mm Chuck. 3 Rotary Table Horizontal & Vertical. Table graduated 360 degrees, Nice smooth rotation. Vertical centre height 44 mm, in 4 Slots. Regular 80 mm horizontal/ vertical Rotary Table complete. One turn = 10 degrees. Supplied with 50 mm Self Centering Chuck & 80 mm Backplate. Contra rotating rapid jaw adjustment mechanism. Quality 3 jaw self centering chuck 50 mm Diameter. Supplied complete with a key as well as set of tee nuts and studs to secure it into place. Backplate is drilled and counterbored to fit a range of 3 and 4 rotary tables with 3 Slots or a 4 Slots. Backplate Threaded: 12 x 1. Rotary Vice 3 Inch. Made from High Grade Casting. For Rotary Table & Vertical Slide. Fits To 3 And 4 Inch Rotary Table. 54 mm Wide Jaw / 20 mm Depth / 30 mm Opening / 30 mm Height. To Hold Round Objects jaws has V-Grooves. Comes Complete With Clamping Nuts. The item “Rotary Table 80 mm 3 in 4 Slot With 50 mm Mini Lathe Chuck And Rotary Vice 80 mm” is in sale since Friday, January 1, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “machinetoolsindia” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Tilting: No
- Backplate Thread: 12 x 1
- Backplate Size: 80 mm
- No. of Slots: 4
- No. of Jaws: 3
- Table graduated: 360 degrees
- One turn: 10 degrees
- Bundle Listing: No
- Table Graduates: 360 Degree
- Chuck Type: Self Centering Chuck
- Operation: Manual
- MPN: RTRVMC80
- Chuck Soze: 50 mm
- Model: Regular 3 in
- Cross-Slide: No
- Brand: European Machinery
Rotary Table Horizontal Vertical Tilting 3, 4+ Chucks + 80 & 100mm Round Vice
3 / 80mm Rotary Table Horizontal Vertical 4 Slots. Table: 3 Diameter or 80mm. Table Height: 1 5/8. Center Height in Vertical Position: 1. Operates in the Horizontal or Vertical position. Hand Wheel calibrated to 10 degrees per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. Table Diameter 3 (75 mm). Overall Height : 2-3/8 (60 mm). T Slot Width 13 mm. Gear Ration 36 : 1. Table tilts up to 90 degree and can be used anywhere in between and locked. The table is graduated 0-360 degree in 5 degree divisions. 4 / 100mm Rotary Table Horizontal Vertical 4 Slots. Table 4 / 100mm manufactured for effective work. 4 T Slots for fixing work can be used with Clamping kit. Vertical Height 55 mm when table kept horizontal. Table graduated 0-360 degrees in 5 degree division. 4 / 100mm Rotary Table Tilting 4 Slots. Features to tilts between 0- 90 Degrees & can be locked at any position. Table diameter 100 mm. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation turns the table by 10 Degrees. Centre Height in vertical position: 2-5/8 (66 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. Rotary Table Horizontal and Vertical 4 Inch 3 slots. Precision Mini Rotary Table 4 Inch or 100mm is manufactured from. Vertical center Height : 2-1/16. Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. In 3 Slots so you can put you Chuck on its easily. 3 T Slots for fixing work to easily clamp chucks. Can be used both Vertically & Horizontally. 4 ROTARY TABLE WITH MT-2 Bore 3 Slot. High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 105 mm. Vertical center height 75 mm. One turn = 5 degrees table graduated 360 degrees. Center Has a MT-2 Taper. Quick Release System for Manual Indexing. And Has 3 Tee Slots. 50mm Lathe Chuck Self – Centering 3 jaw. Quality 3 jaw self centering chuck 50mm Diameter with. Contra rotating rapid jaw adjustment mechanism. 50mm Lathe Chuck Independent 4 jaw. 2 / 50mm LATHE CHUCK. 4 Jaw Independent Centering Chuck -Contra rotating rapid jaw adjustment mechanism. 1 Handle with 50mm chuck. 65mm Lathe Chuck Self – Centering 3 jaw. Quality 3 jaw self centering chuck 65mm Diameter with. 65 mm Lathe Chuck Independent 4 jaw. 4 Jaw Independent Centering Chuck. 1 Handle with 65mm chuck. 70 mm Lathe Chuck Independent 4 jaw. 1 Handle with 70mm chuck. Diameter of Base : 80 mm. Jaw Width : 54 mm. Jaw Depth: 20 mm. Jaw Opening : 32 mm. Made of high grade close grain caste Iron. The moving jaw has V-grooves to hold Round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Caste Iron 100 mm Round Vice for Rotary Table. Diameter of Base : 105mm Jaw Width : 80mm Jaw Depth: 21mm Jaw Opening : 40mm Height : 32. A Precision work positioning device used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Rotary tables are most commonly mounted “flat”, with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it “flat” on a 90° angle plate), so that it rotates about a horizontal axis. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To cut complex curves (with proper setup). To cut straight lines at any angle. PROUDLY MADE IN INDIA. Bluefox Tools comprises of a dedicated and skilled team of engineers with an aim of providing you tools of highest indian industrial standards. Situated at the industrial hub of India we specialize in providing complete tooling solutions. Our Motto : Right Quality. The Motto of the Company is to deliver the best products and services to the customers at most competitive prices. We ensure the product reaches you at the earliest. Do not sign the receipt slip and kindly return the p. We are looking forward to your positive reviews and to build a long term relationship. The item “Rotary Table Horizontal Vertical Tilting 3, 4+ Chucks + 80 & 100mm Round Vice” is in sale since Tuesday, July 28, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “bluefox_tools” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Brand: BLUEFOX