https://horizontalverticalrotary.com Sat, 02 May 2026 17:56:43 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://horizontalverticalrotary.com/2025/09/07/lot-of-5-precision-machining-rotary-tables-chucks-4-face-plates-320mm-ts320a-3/ https://horizontalverticalrotary.com/2025/09/07/lot-of-5-precision-machining-rotary-tables-chucks-4-face-plates-320mm-ts320a-3/#comments Sun, 07 Sep 2025 07:56:48 +0000 https://horizontalverticalrotary.com/2025/09/07/lot-of-5-precision-machining-rotary-tables-chucks-4-face-plates-320mm-ts320a-3/ …

Read more ›

]]>

























Lot of 5 Precision Machining Rotary Tables & Chucks & 3 Face Plates, Everything came from a local machine shop and im not a machinist so this stuff is foreign to me, see images for more info. Most have no brand names that I can find but a more detailed description of each is below. Rotary table (green base) with chuck, is stamped made in japan (3 jaw 8/210mm chuck). Largest one is a 320mm. Rotary table with face plate, name plate is in. Has a micrometer turning handle that spins the table. 4 Jaw 10 chuck (No markings) has screws coming out bottom. Amestra 11 3/4 3 jaw chuck, plain back. 4 Round face plates, No markings on any them (2) 16″ (2) 15″, 1 has a lot rust, 1 have some, others look ok.

]]> https://horizontalverticalrotary.com/2025/09/07/lot-of-5-precision-machining-rotary-tables-chucks-4-face-plates-320mm-ts320a-3/feed/ 0 https://horizontalverticalrotary.com/2025/08/20/lot-of-5-precision-machining-rotary-tables-chucks-4-face-plates-320mm-ts320a-2/ https://horizontalverticalrotary.com/2025/08/20/lot-of-5-precision-machining-rotary-tables-chucks-4-face-plates-320mm-ts320a-2/#comments Wed, 20 Aug 2025 07:04:53 +0000 https://horizontalverticalrotary.com/2025/08/20/lot-of-5-precision-machining-rotary-tables-chucks-4-face-plates-320mm-ts320a-2/ …

Read more ›

]]>

























Lot of 5 Precision Machining Rotary Tables & Chucks & 3 Face Plates, Everything came from a local machine shop and im not a machinist so this stuff is foreign to me, see images for more info. Most have no brand names that I can find but a more detailed description of each is below. Rotary table (green base) with chuck, is stamped made in japan (3 jaw 8/210mm chuck). Largest one is a 320mm. Rotary table with face plate, name plate is in. Has a micrometer turning handle that spins the table. 4 Jaw 10 chuck (No markings) has screws coming out bottom. Amestra 11 3/4 3 jaw chuck, plain back. 4 Round face plates, No markings on any them (2) 16″ (2) 15″, 1 has a lot rust, 1 have some, others look ok.

]]> https://horizontalverticalrotary.com/2025/08/20/lot-of-5-precision-machining-rotary-tables-chucks-4-face-plates-320mm-ts320a-2/feed/ 0 https://horizontalverticalrotary.com/2025/07/02/vertex-hv-8-4-slot-8-horizontalvertical-rotary-table-with-4-slot-face-plate-7/ https://horizontalverticalrotary.com/2025/07/02/vertex-hv-8-4-slot-8-horizontalvertical-rotary-table-with-4-slot-face-plate-7/#comments Thu, 03 Jul 2025 04:29:31 +0000 https://horizontalverticalrotary.com/2025/07/02/vertex-hv-8-4-slot-8-horizontalvertical-rotary-table-with-4-slot-face-plate-7/ …

Read more ›

]]>



We stock the 4 slot version of these and yes they are genuine VERTEX! We get asked that all the time, but you can see that it is a genuine VERTEX product. We also sell the dividing plates and tail stocks as well as 3 jaw chucks and other accessories for these units. We are your source for VERTEX rotary tables and accessories! Well, we are glad you asked! We are a company that first seeks to glorify God in all that we do. We are involved in 2 local ministries that help formerly incarcerated people to find good jobs. We are also involved in youth programs, local and international missions as well. We empower people by helping them find the right tools to make their lives easier. We believe in living sustainably, so our main focal point has been to recycle tools. To further help preserve the environment. We also enjoy sharing what we have learned in our 42 years of serving the tool needs of customers from all over the country! Generations of tool lovers can attest to the fact that we treat you right! We invite you to join our tool family today, you will be glad you did! Tools are our passion, and we love to help people find great tools for their specific job. We do our best to earn your business!

]]> https://horizontalverticalrotary.com/2025/07/02/vertex-hv-8-4-slot-8-horizontalvertical-rotary-table-with-4-slot-face-plate-7/feed/ 0 https://horizontalverticalrotary.com/2025/06/28/vertex-hv-8-8-horizontal-vertical-rotary-table-with-face-plate-4/ https://horizontalverticalrotary.com/2025/06/28/vertex-hv-8-8-horizontal-vertical-rotary-table-with-face-plate-4/#comments Sat, 28 Jun 2025 16:04:55 +0000 https://horizontalverticalrotary.com/2025/06/28/vertex-hv-8-8-horizontal-vertical-rotary-table-with-face-plate-4/ …

Read more ›

]]>













VERTEX HV-8 8 Horizontal / Vertical Rotary Table with Face Plate. Our Tables are made of high density Meehanite and use “HEIDENHAIN” electronic equipment to inspect angle to assure the excellent quality and durableness. Use excellent machining center to process. Spindle end be applied accuracy bearing. Can be assured to keep very steady under load cutting. Worm is hardened and ground. The ratio is 90:1. The work table is graduated a full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1’min. And vernier scale makes settings down to 10 seconds possible. These Rotary Tables are popular for their excellent performance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work. Using the Key guide block, the center can be corrected quickly and accurately. If You have any questions regarding this item, please let us know we’ll be happy to help.

]]> https://horizontalverticalrotary.com/2025/06/28/vertex-hv-8-8-horizontal-vertical-rotary-table-with-face-plate-4/feed/ 0 https://horizontalverticalrotary.com/2025/06/10/lot-of-5-precision-machining-rotary-tables-chucks-4-face-plates-320mm-ts320a/ https://horizontalverticalrotary.com/2025/06/10/lot-of-5-precision-machining-rotary-tables-chucks-4-face-plates-320mm-ts320a/#comments Tue, 10 Jun 2025 13:08:52 +0000 https://horizontalverticalrotary.com/2025/06/10/lot-of-5-precision-machining-rotary-tables-chucks-4-face-plates-320mm-ts320a/ …

Read more ›

]]>

























Lot of 5 Precision Machining Rotary Tables & Chucks & 3 Face Plates, Everything came from a local machine shop and im not a machinist so this stuff is foreign to me, see images for more info. Most have no brand names that I can find but a more detailed description of each is below. Rotary table (green base) with chuck, is stamped made in japan (3 jaw 8/210mm chuck). Largest one is a 320mm. Rotary table with face plate, name plate is in. Has a micrometer turning handle that spins the table. 4 Jaw 10 chuck (No markings) has screws coming out bottom. Amestra 11 3/4 3 jaw chuck, plain back. 4 Round face plates, No markings on any them (2) 16″ (2) 15″, 1 has a lot rust, 1 have some, others look ok.

]]> https://horizontalverticalrotary.com/2025/06/10/lot-of-5-precision-machining-rotary-tables-chucks-4-face-plates-320mm-ts320a/feed/ 0 https://horizontalverticalrotary.com/2025/05/06/vertex-hv-10-10-horizontal-vertical-rotary-table-with-face-plate-6-slots-5/ https://horizontalverticalrotary.com/2025/05/06/vertex-hv-10-10-horizontal-vertical-rotary-table-with-face-plate-6-slots-5/#comments Tue, 06 May 2025 11:34:43 +0000 https://horizontalverticalrotary.com/2025/05/06/vertex-hv-10-10-horizontal-vertical-rotary-table-with-face-plate-6-slots-5/ …

Read more ›

]]>





VERTEX HV-10 10 Horizontal / Vertical Rotary Table with Face Plate (6 Slots). Our Tables are made of high density Meehanite and use “HEIDENHAIN” electronic equipment to inspect angle to assure the excellent quality and durableness. Use excellent machining center to process. Spindle end be applied accuracy bearing. Can be assured to keep very steady under load cutting. Worm is hardened and ground. The ratio is 90:1. The work table is graduated a full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1’min. And vernier scale makes settings down to 10 seconds possible. These Rotary Tables are popular for their excellent performance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work. Using the Key guide block, the center can be corrected quickly and accurately. If You have any questions regarding this item, please let us know we’ll be happy to help.

]]> https://horizontalverticalrotary.com/2025/05/06/vertex-hv-10-10-horizontal-vertical-rotary-table-with-face-plate-6-slots-5/feed/ 0 https://horizontalverticalrotary.com/2025/03/16/12-haas-hrt-310-cnc-rotary-table-12-t-slotted-face-plate-excellent-condition/ https://horizontalverticalrotary.com/2025/03/16/12-haas-hrt-310-cnc-rotary-table-12-t-slotted-face-plate-excellent-condition/#comments Sun, 16 Mar 2025 21:01:58 +0000 https://horizontalverticalrotary.com/2025/03/16/12-haas-hrt-310-cnc-rotary-table-12-t-slotted-face-plate-excellent-condition/ …

Read more ›

]]>








Great American Equipment Company. 12 HAAS 4TH AXIS ROTARY TABLE. Model HRT 310, S/N 318269, New 2015 Stock# Q12001 LB3-1C. For holding medium to large parts or fixtures, the HRT Series of T-slotted rotary tables is the answer. These rugged, heavy-duty tables can be mounted vertically or horizontally for added versatility. Chucks and fixtures can easily be bolted to the table using the six precision T-slots, and large through-holes allow for bar feeding and special fixture-locating requirements. Max Load Capacity, Vertical. Hole Thru Center of Table. CONDITION: This Table Is like New has never been used! If there is an issue, you can deal directly with the transportation provider.

]]> https://horizontalverticalrotary.com/2025/03/16/12-haas-hrt-310-cnc-rotary-table-12-t-slotted-face-plate-excellent-condition/feed/ 0 https://horizontalverticalrotary.com/2023/07/22/haas-hrt450-rotary-table-7-12-x-17-face-plate/ https://horizontalverticalrotary.com/2023/07/22/haas-hrt450-rotary-table-7-12-x-17-face-plate/#comments Sat, 22 Jul 2023 15:00:46 +0000 https://horizontalverticalrotary.com/2023/07/22/haas-hrt450-rotary-table-7-12-x-17-face-plate/ …

Read more ›

]]>








Haas HRT450 Rotary Table 7-1/2″ x 17″ Face Plate. TAIL STOCK IS NOT INCLUDED. We sell used equipment at deeply discounted prices. We will palletize and load on your truck free of charge. Our warehouse is equipped with a standard loading dock.

]]> https://horizontalverticalrotary.com/2023/07/22/haas-hrt450-rotary-table-7-12-x-17-face-plate/feed/ 0 https://horizontalverticalrotary.com/2022/12/09/face-milling-on-the-horizontal-mill-machining-straight-edges/ https://horizontalverticalrotary.com/2022/12/09/face-milling-on-the-horizontal-mill-machining-straight-edges/#comments Fri, 09 Dec 2022 07:09:15 +0000 https://horizontalverticalrotary.com/2022/12/09/face-milling-on-the-horizontal-mill-machining-straight-edges/ ]]> https://horizontalverticalrotary.com/2022/12/09/face-milling-on-the-horizontal-mill-machining-straight-edges/feed/ 0 https://horizontalverticalrotary.com/2021/11/26/vertex-hv-8-4-slot-8-horizontalvertical-rotary-table-with-4-slot-face-plate-6/ https://horizontalverticalrotary.com/2021/11/26/vertex-hv-8-4-slot-8-horizontalvertical-rotary-table-with-4-slot-face-plate-6/#comments Fri, 26 Nov 2021 23:38:50 +0000 https://horizontalverticalrotary.com/2021/11/26/vertex-hv-8-4-slot-8-horizontalvertical-rotary-table-with-4-slot-face-plate-6/ …

Read more ›

]]>





VERTEX HV-8 (4-Slot) 8 Horizontal/Vertical Rotary Table with 4-Slot Face Plate. Our Tables are made of high density Meehanite and use “HEIDENHAIN” electronic equipment to inspect angle to assure the excellent quality and durableness. Use excellent machining center to process. Spindle end be applied accuracy bearing. Can be assured to keep very steady under load cutting. Worm is hardened and ground. The ratio is 90:1. The work table is graduated a full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1’min. And vernier scale makes settings down to 10 seconds possible. These Rotary Tables are popular for their excellent performance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work. Using the Key guide block, the center can be corrected quickly and accurately. If You have any questions regarding this item, please let us know we’ll be happy to help. The item “VERTEX HV-8 (4-Slot) 8 Horizontal/Vertical Rotary Table with 4-Slot Face Plate” is in sale since Tuesday, November 16, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Brand: VERTEX
• MPN: HV-8-4
• Country/Region of Manufacture: Taiwan
• Model: HV-8 (4 slots)

]]> https://horizontalverticalrotary.com/2021/11/26/vertex-hv-8-4-slot-8-horizontalvertical-rotary-table-with-4-slot-face-plate-6/feed/ 0