HAAS Control Box, BRUSHLESS, Haas Rotary Table, HRT 160, 210, 310 450, SIGMA CNC
HAAS AUTOMATION BRUSHLESS ROTARY CONTROL UNIT. 28 Pin, 120V, Silver Box, Programmable, Made in the USA. Lets you operate a Haas rotary on a non-Haas machine, or on a Haas machine without an optional axis drive. WILL RUN HA5C, HRT160 HRT210 HRT310 HRT450. When used with any CNC machining center, the control performs as a semi-4th axis, activated by a single M-code. You can program the control to rotate the rotary spindle in either direction, in step sizes from 0.001° to 999.999°. There can be up to 99 different steps in memory, and each step can be repeated (or looped) up to 999 times. Non-volatile memory retains programs, even when the power is turned off, and you can store up to 10 separate programs. Store up to 10 programs. Program up to 99 commands, and loop each command up to 999 times. 001 degree to 999.999 degrees. Operates on 110 VAC power. Allows Haas rotary products to be used on non-Haas machine tools. Does not include the CNC interface cable. Runs and sounds great, recently removed from a Haas VF-3 CNC Vertical Machining Center Mill. Midwest_Machinery_Inc ; IT’S IN OUR SHOP UNDERPOWER in FRANKSVILLE, WI NEAR. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “midwest_machinery_inc” and is located in this country: US. This item can be shipped to United States.
- Brand: Haas
- MPN: HRT, HA5C
- Setting Position: Horizontal/Vertical
- Operation: CNC
- Country/Region of Manufacture: United States
HV6 /150 mm /6 Inches Rotary Table & Steel Dividing Plates Set- USA FULFILLED
HV6 /150 mm /6 Inches Rotary Table & Steel Dividing Plates Set with Free Manual-Milling Indexing Kit. (3 SLOT ROTARY TABLE WITH HV6/HV4 DIVIDING PLATE). Horizontal Vertical Rotary Table 150 mm rotary diameter MT2 center bore with free operation & working manual. Rotary table’s Overall Height : 80 mm (3-1/4) Centre Height in Vertical Position: 105 mm Worm- Gear Ratio- 1:90, which means that the 1 handle rotation shall turn the table by 4 Degrees. Table Graduated 360 Degrees, Resettable Dial & Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds. Set of 3 dividing plates designed to fit this HV6 Rotary Tables is included in the kit. Centre Hole of the Plate is 21 mm No. Of Holes in each Plate Plate A- 15, 16, 17, 18, 19, 20, Plate B- 21, 23, 27, 29, 31, 33 Plate C- 37, 39, 41, 47, 49 It is supplied with a brass stopper key, Bracket, Crank Handle & fixing screws. (4 SLOT ROTARY TABLE WITH HV6/HV4 DIVIDING PLATE). HV6 /150 mm /6 Inches-4 Slots Rotary Table & Steel Dividing Plates Set with Free Manual-Milling Indexing Kit. Our company always wants our customer to be happy with our service and our products at best prices. We ensure the product reaches you at the earliest. Please be aware that some countries may have local import regulations which restrict certain products from being imported. Do not sign the receipt slip and kindly return the p. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “globaltools2016″ and is located in this country: US. This item can be shipped to United States.
- STYLE: 3 SLOT ROTARY TABLE WITH HV6/HV4 DIVIDING PLATE
- Brand: ASSORTS
- Unit Type: Unit
- Tilting: No
- Cross-Slide: No
- Setting Position: Horizontal/Vertical
- MPN: HV6 ROTARY TABLE WITH DIVIDING PLATE
- Operation: CNC
- Country/Region of Manufacture: India
- Unit Quantity: 1
HV6 Rotary Table (150 mm -6 Inches) 3 SLOT Milling Machine-USA
Horizontal Vertical HV6 Rotary Table (150 mm -6 Inches) for Milling Machine. Manufactured from High grade seasoned casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surfac. Gear Ratio 90:1 Center Bore MT-2 T Slot 16mm. Horizontal Height : Approx 80mm from Base to Top surface of Chuck Satin Chrome Dials Graduated 360 degree around its circumference. STAY AWAY FROM CHEAP COPIES. TAGGED SELLERS ARE NOT AUTHORISED TO SELL ASSORTS BRAND PRODUCTS. Our company always wants our customer to be happy with our service and our products at best prices. We ensure the product reaches you at the earliest. Please be aware that some countries may have local import regulations which restrict certain products from being imported. Do not sign the receipt slip and kindly return the p. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “globaltools2016″ and is located in this country: US. This item can be shipped to United States.
- Brand: ASSORTS
- Tilting: No
- Power Source: Manual
- Size: Large
- Color: Ground Finsing
- Cross-Slide: Yes
- Setting Position: Horizontal/Vertical
- Material: Caste Iron, & Steel
- Operation: Manual
- Country/Region of Manufacture: India
Rotary Table Horizontal/Vertical 3”/75 mm 4Slot With 24 Pcs Clamping Kit
Rotary Table 3 Inch Or 75 mm. Can be used both Vertically & Horizontally. Precision Mini Rotary Table 3 or 75mm is manufactured from Seasoned casting. Precisely maintained Chuck Run Out and Bottom Surface for accurate work. 4 T Slots for fixing work can be used with Clamping kit. Table graduated 0-360” in 5 divisions. Winding handle is graduated 0-10” in 5 minute divisions. 24 Pcs Clamping Kit Set – 24 M6 Thead. Use These Handy Clamping Kits widely. 4 TEE NUTS 8MM TEE. 4 FLANGED NUTS 6MM THREAD. 4 COUPLING NUTS 6MM THREAD. 2 STUDS 6MM THREAD 80MM LONG. 2 STUDS 6MM THREAD 100MM LONG. 2 STEP BLOCKS 32MM LONG X 20MM HIGH. 2 STEP BLOCKS 37MM LONG X 26MM HIGH. 2 SMALL STEP CLAMPS. 2 LARGE STEP CLAMPS. Epoxy Black Finish for a long Rust Free Life. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “model_tools” and is located in this country: IN. This item can be shipped worldwide.
- Setting Position:: Horizontal/Vertical
- Tilting: No
- Custom Bundle: No
- Table Slots: 4
- Table Dia:: 3-1/8\
- Table Height:: 1-5/8\
- Table Scale Graduated:: 5 Degree
- Modified Item: No
- Brand: model tools
- Function: Milling
- Control: Manual
- Model: 3”/75 mm HV ROTARY TABLE
- Country/Region of Manufacture: India
4 Inch Rotary Table High Precision Horizontal & Vertical 4 Milling Slots
4 Rotary Table 100mm Horizontal Vertical With 4 Slots For Milling. Can be used in both horizontal & vertical position. Table graduated in 360 Degrees. The scale calibrated in 5 degree increment. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “limraexporttools” and is located in this country: IN. This item can be shipped worldwide.
- Brand: letools
- Table Slots:: 4
- Tilting: Yes
- Table graduated:: 360 Degrees
- Custom Bundle: No
- Table Dia:: 4\
- MPN: 4IRT
- Setting Position: Horizontal/Vertical
- Operation: Manual
- Table Height:: 2-1/16\
- Country/Region of Manufacture: India
- Modified Item: No
3 Inches (75Mm) 4 Slots Horizontal and Vertical (H/V) Rotary Table with M6 Cla
3 Inches (75Mm) 4 Slots Horizontal and Vertical (H/V) Rotary Table with M6 Cla. A great combo of 3/80 mm Rotary table with M6 clamp Kit. Quality Low Profile Rotary Table diameter 80 mm (3Inches). Table is graduated 360 Degrees. M6 Clamp kit -Suits to 3 inches Rotary Table. This Set includes Following: 2 x step blocks 2 x tee bolts with flanged nut 2 x clamps Bolt length: 55 mm overall & Bolt Thread M6. 3inches rotary Table: 1. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position without chuck: 2-5/8 (66 mm approx) 4. Hand wheel is graduated in divisions of 10 min & can be set to zero. M6 Clamp Kit: 1. M6 Clamp kit -Suits to 3 inches Rotary Table 2. 6.0 inches x 8.0 inches x 3.0 inches. Weight: 5.0 lb. Tool Steel & Casting. 8 x 6 x 3 inches. With our dynamic pricing model, our prices are always competitive. Our prices are some of the lowest that you will find on the internet. Rest assured that you’re getting a good deal when purchasing with us. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “oklahomas-best” and is located in this country: US. This item can be shipped to United States, New Zealand, Fiji, Papua New Guinea, Wallis and Futuna, Gambia, Malaysia, Taiwan, Poland, Oman, Suriname, United Arab Emirates, Kenya, Argentina, Guinea-Bissau, Armenia, Uzbekistan, Bhutan, Senegal, Togo, Ireland, Qatar, Burundi, Netherlands, Slovakia, Slovenia, Equatorial Guinea, Thailand, Aruba, Sweden, Iceland, Macedonia, Belgium, Israel, Kuwait, Liechtenstein, Benin, Algeria, Antigua and Barbuda, Italy, Swaziland, Tanzania, Pakistan, Burkina Faso, Panama, Singapore, Kyrgyzstan, Switzerland, Djibouti, Chile, China, Mali, Botswana, Republic of Croatia, Cambodia, Indonesia, Portugal, Malta, Tajikistan, Vietnam, Cayman Islands, Paraguay, Saint Helena, Cyprus, Seychelles, Rwanda, Bangladesh, Australia, Austria, Sri Lanka, Gabon Republic, Zimbabwe, Bulgaria, Czech Republic, Norway, Côte d’Ivoire (Ivory Coast), Kiribati, Turkmenistan, Grenada, Greece, Haiti, Greenland, Yemen, Afghanistan, Montenegro, Mongolia, Nepal, Bahamas, Bahrain, United Kingdom, Bosnia and Herzegovina, Hungary, Angola, Western Samoa, France, Mozambique, Namibia, Peru, Denmark, Guatemala, Solomon Islands, Vatican City State, Sierra Leone, Nauru, Anguilla, El Salvador, Dominican Republic, Cameroon, Guyana, Azerbaijan Republic, Macau, Georgia, Tonga, San Marino, Eritrea, Saint Kitts-Nevis, Morocco, Saint Vincent and the Grenadines, Mauritania, Belize, Philippines, Democratic Republic of the Congo, Republic of the Congo, Colombia, Spain, Estonia, Bermuda, Montserrat, Zambia, South Korea, Vanuatu, Ecuador, Albania, Ethiopia, Monaco, Niger, Laos, Ghana, Cape Verde Islands, Moldova, Madagascar, Saint Pierre and Miquelon, Lebanon, Liberia, Bolivia, Maldives, Gibraltar, Hong Kong, Central African Republic, Lesotho, Nigeria, Mauritius, Saint Lucia, Jordan, Guinea, Canada, Turks and Caicos Islands, Chad, Andorra, Romania, Costa Rica, India, Mexico, Serbia, Kazakhstan, Saudi Arabia, Japan, Lithuania, Trinidad and Tobago, Malawi, Nicaragua, Finland, Tunisia, Luxembourg, Uganda, Brazil, Turkey, Germany, Egypt, Latvia, Jamaica, South Africa, Brunei Darussalam, Honduras.
- Brand: RAHISH TOOLS
- Item model number: 3ROTARYKIT
- Part Number: 3ROTARYKIT
- Style: Modern
- Power Source: MANUAL
- Material: Tool Steel & Casting
- Country of Origin: India
- Batteries Required?: No
- Item Weight: 5 Pounds
- Batteries Included?: No
- Manufacturer: RAHISH TOOLS
- Package Dimensions: 8 x 6 x 3 inches
- Included Components: 1
- UPC: 7445046442453
- EAN: 07445046442453
Johnson Level Horizontal & Vertical Rotary Laser Kit
Johnson Level Horizontal & Vertical Rotary Laser Kit. Family Owned & Operated Since 1948. The Johnson & tool 40-6582 electronic self-leveling digital dual grade horizontal & vertical rotary laser kit operates with radio frequency remote control, has a LCD display with backlight illumination and a large +/- 8 degrees electronic self level range and a programmable dual slope function. Programmable dual slope function allows user to perform slope at different inclinations in both x and y axis Large ±8 degrees electronic self level range when beyond the leveling range, the laser beam will flash, rotation of the beam will stop Operates with radio frequency remote control Height of instrument/tilt alarm function ensures product accuracy. Acme Tools was founded by George Kuhlman in 1948 as a small electric motor repair shop in downtown Grand Forks, North Dakota. The business was named “ACME” because it represented the highest level or degree attainable – the peak of perfection. The core values back then were simple, offer customers the highest quality products at competitive prices, backed by superior professional service and support. Now two generations and 70 years later, this family owned business has grown to become a major retailer of tools and equipment Today, Acme Tools celebrates 70 years of experience serving customers and continues to be one of the premier retailers of tools and equipment with some of the largest first-class showrooms in the nation and the best online tool store in e-commerce. With ten locations in North Dakota, Minnesota and Iowa, Acme Tools serves the contractor, woodworker and do-it-yourselfer with a wide selection of tools and equipment from all the major manufacturers. WHY SHOP WITH ACME TOOLS? Over 70 years of Industry Experience. Acme Tools has been in business since 1948 and enjoyed over 70 years of business serving the contractor, woodworker and do-it-yourselfer. We are not some start-up company that doesn’t understand the business or your needs. Huge Stock Levels and Vast Selections. We understand that when you need a tool, you need it now. We pride ourselves on having the lowest out of stock rate of anyone in the industry. We support ten retail locations and know from experience that customers want and need full-line availability. Are you satisfied with your order? Need a technical question answered? We may not have all the answers, but we’ll do our best to get you an answer. Our call center is available for expert advice. We are committed to the tool business and we train our sales staff to reflect that commitment, before and after the sale. In addition to fast order processing, we offer some of the best express air rates in the business. Market Leader with new products. We make sure we are first to market when it comes to new products. This item is in the category “Home & Garden\Tools & Workshop Equipment\Measuring & Layout Tools\Meters, Sensors & Probes”. The seller is “acmetools” and is located in this country: US. This item can be shipped to United States.
- Brand: Johnson Level
- Manufacturer Part Number: 40-6582
- Type: Laser Levels
- SKU: 40-6582
- Item Weight: 7.3
- UPC: 049448065820
4” inch 100mm Rotary Table Horizontal & Vertical Model Indexing Table
4” REGULAR ROTARY TABLE. Brand New Very High Quality 4 /100 mm Regular Rotary Table designed for smaller milling machines. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 50 mm approx. Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. Material – graded caste iron body, alloy steel handle and worm, gun metal gear. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “orthopedic_store” and is located in this country: IN. This item can be shipped worldwide.
- Brand: Shubh_Store
- Setting Position: Horizontal/Vertical
- Operation: Manual