4_Inch_II100mm_HV_Rotary_Milling_Table_M6_Clamp_Kit_Suitable_Tailstock_with_Vise_01_whsx

4”Inch II100mm HV Rotary Milling Table+M6 Clamp Kit+ Suitable Tailstock with Vise

4''Inch II100mm HV Rotary Milling Table+M6 Clamp Kit+ Suitable Tailstock with Vise

4''Inch II100mm HV Rotary Milling Table+M6 Clamp Kit+ Suitable Tailstock with Vise
Description of 4 (100 mm) HV Rotary Table designed for Smaller Milling Machines Supplied Option of Round Vices & Fixing T nuts. Table diameter 100 mm table is graduated 360 degrees. Worm gear ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 degrees. Center height in vertical position: 2-1/16 (50 mm approx) (without Vice mounting). Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in horizontal & vertical position. Details of Round Vice: 80 mm round vice. Made of high grade close grain caste iron. Designed to fit our 3″ (75 mm) & 4″ (100 mm) rotary tables. The moving jaw has v-grooves to hold round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Diameter of base : 80 mm ; jaw width : 54 mm ; jaw depth: 20 mm; jaw opening : 32 mm ;height : 29 mm. Details of Round Vice: 100 mm Round Vice. Made of high grade close grain caste Iron. Designed to fit our 4 (100 mm) Rotary Tables. The moving jaw has V-grooves to hold Round objects. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Diameter of Base : 105 mm Jaw Width : 75 mm Jaw Depth: 21 mm Jaw Opening : 40 mm Height : 32 mm. Details of M6 Clamp Kit. M6 Clamp kit -Suits to 3″ & 4″ Rotary Tables. This will fit both the Horizontal & Tilting model of our 3″ (75 mm) & 4″ (100 mm) Rotary – 4 Slots Table. This Set includes Following: 2 x step blocks 2 x tee bolts with flanges nut 2 x clamps Bolt length: 55 mm overall & Bolt Thread M6. Small Tailstock for 3″ Inches (80 mm) & 4″ Inches (100 mm) Regular & Tilting Models Rotary Tables. Small Lathe Tailstock suitable for 3″ (80 mm) & 4″ (100 mm) Regular and Tilting Model of our Rotary Tables. Very Robust quality tailstock in Caste Iron, the moving dead centre in EN31- hardened & ground. The Center Height is so that it suits center height of all 4 different types of 3″/ 80 and 4″/ 100 mm HV and Tilting models of the Rotary tables, simply by reversing the body of it in upside down position. Vices & work Holding. Jewelry & Watch Making. Do It Yourself (DIY Tools). HSS Cutting & Finishing Tools. 4”Inch II100mm HV Rotary Milling Table+M6 Clamp Kit+ Suitable Tailstock w/ Vise. Pls note :- 1/. It is important to note that after the pandemic, although the logistic services have been improved a lot. However, they are still to reach their original positions. We expect our customers to understand and support us in such issues which are unforeseen and not in our control. However, we take complete onus and responsibility of supplying you a completely brand new product without any manufacturing or transit damage. Though we packed our goods with utmost care and strong packaging material, since our products are heavy in weight, there could be transit damage in a few cases. However it has been seen that such issues are not always a problem and our customers could still use them. In majority of the cases, we have experienced that we manage to resolve the issue amicably without any trouble. So a discussion is the best way of a desired resolution. Listing and template services provided by inkFrog.
4''Inch II100mm HV Rotary Milling Table+M6 Clamp Kit+ Suitable Tailstock with Vise
4inch, clamp, ii100mm, milling, rotary, suitable, tablem6, tailstock, vise
4_Inch_II_100mm_HV_Rotary_Table_M6_Clamp_Kit_with_Vise_Ship_From_USA_01_tqn

4”Inch II 100mm HV Rotary Table +M6 Clamp Kit with Vise Ship From USA

4''Inch II 100mm HV Rotary Table +M6 Clamp Kit with Vise Ship From USA

4''Inch II 100mm HV Rotary Table +M6 Clamp Kit with Vise Ship From USA
Description of 4 (100 mm) HV Rotary Table designed for Smaller Milling Machines Supplied Option of Round Vices & Fixing T nuts. Table diameter 100 mm table is graduated 360 degrees. Worm gear ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 degrees. Center height in vertical position: 2-1/16 (50 mm approx) (without Vice mounting). Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in horizontal & vertical position. Details of Round Vice: 80 mm round vice. Made of high grade close grain caste iron. Designed to fit our 3″ (75 mm) & 4″ (100 mm) rotary tables. The moving jaw has v-grooves to hold round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Diameter of base : 80 mm ; jaw width : 54 mm ; jaw depth: 20 mm; jaw opening : 32 mm ;height : 29 mm. Details of Round Vice: 100 mm Round Vice. Made of high grade close grain caste Iron. Designed to fit our 4 (100 mm) Rotary Tables. The moving jaw has V-grooves to hold Round objects. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Diameter of Base : 105 mm Jaw Width : 75 mm Jaw Depth: 21 mm Jaw Opening : 40 mm Height : 32 mm. Details of M6 Clamp Kit. M6 Clamp kit -Suits to 3″ & 4″ Rotary Tables. This will fit both the Horizontal & Tilting model of our 3″ (75 mm) & 4″ (100 mm) Rotary – 4 Slots Table. This Set includes Following: 2 x step blocks 2 x tee bolts with flanges nut 2 x clamps Bolt length: 55 mm overall & Bolt Thread M6. Vices & work Holding. Jewelry & Watch Making. Do It Yourself (DIY Tools). HSS Cutting & Finishing Tools. Pls note :- 1/. It is important to note that after the pandemic, although the logistic services have been improved a lot. However, they are still to reach their original positions. We expect our customers to understand and support us in such issues which are unforeseen and not in our control. However, we take complete onus and responsibility of supplying you a completely brand new product without any manufacturing or transit damage. Though we packed our goods with utmost care and strong packaging material, since our products are heavy in weight, there could be transit damage in a few cases. However it has been seen that such issues are not always a problem and our customers could still use them. In majority of the cases, we have experienced that we manage to resolve the issue amicably without any trouble. So a discussion is the best way of a desired resolution. Listing and template services provided by inkFrog.
4''Inch II 100mm HV Rotary Table +M6 Clamp Kit with Vise Ship From USA
100mm, 4inch, clamp, rotary, ship, table, vise
4_Inch_II100mm_HV_Rotary_Table_M6_Clamp_Kit_Tailstock_with_Vise_USA_Fulfilled_01_jgha

4”Inch II100mm HV Rotary Table+M6 Clamp Kit+ Tailstock with Vise (USA Fulfilled)

4''Inch II100mm HV Rotary Table+M6 Clamp Kit+ Tailstock with Vise (USA Fulfilled)
4''Inch II100mm HV Rotary Table+M6 Clamp Kit+ Tailstock with Vise (USA Fulfilled)
4''Inch II100mm HV Rotary Table+M6 Clamp Kit+ Tailstock with Vise (USA Fulfilled)
4''Inch II100mm HV Rotary Table+M6 Clamp Kit+ Tailstock with Vise (USA Fulfilled)
4''Inch II100mm HV Rotary Table+M6 Clamp Kit+ Tailstock with Vise (USA Fulfilled)
4''Inch II100mm HV Rotary Table+M6 Clamp Kit+ Tailstock with Vise (USA Fulfilled)
4''Inch II100mm HV Rotary Table+M6 Clamp Kit+ Tailstock with Vise (USA Fulfilled)
4''Inch II100mm HV Rotary Table+M6 Clamp Kit+ Tailstock with Vise (USA Fulfilled)

4''Inch II100mm HV Rotary Table+M6 Clamp Kit+ Tailstock with Vise (USA Fulfilled)
Description of 4 (100 mm) HV Rotary Table designed for Smaller Milling Machines Supplied Option of Round Vices & Fixing T nuts. Table diameter 100 mm table is graduated 360 degrees. Worm gear ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 degrees. Center height in vertical position: 2-1/16 (50 mm approx) (without Vice mounting). Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in horizontal & vertical position. Details of Round Vice: 80 mm round vice. Made of high grade close grain caste iron. Designed to fit our 3″ (75 mm) & 4″ (100 mm) rotary tables. The moving jaw has v-grooves to hold round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Diameter of base : 80 mm ; jaw width : 54 mm ; jaw depth: 20 mm; jaw opening : 32 mm ;height : 29 mm. Details of Round Vice: 100 mm Round Vice. Made of high grade close grain caste Iron. Designed to fit our 4 (100 mm) Rotary Tables. The moving jaw has V-grooves to hold Round objects. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Diameter of Base : 105 mm Jaw Width : 75 mm Jaw Depth: 21 mm Jaw Opening : 40 mm Height : 32 mm. Details of M6 Clamp Kit. M6 Clamp kit -Suits to 3″ & 4″ Rotary Tables. This will fit both the Horizontal & Tilting model of our 3″ (75 mm) & 4″ (100 mm) Rotary – 4 Slots Table. This Set includes Following: 2 x step blocks 2 x tee bolts with flanges nut 2 x clamps Bolt length: 55 mm overall & Bolt Thread M6. Small Tailstock for 3″ Inches (80 mm) & 4″ Inches (100 mm) Regular & Tilting Models Rotary Tables. Small Lathe Tailstock suitable for 3″ (80 mm) & 4″ (100 mm) Regular and Tilting Model of our Rotary Tables. Very Robust quality tailstock in Caste Iron, the moving dead centre in EN31- hardened & ground. The Center Height is so that it suits center height of all 4 different types of 3″/ 80 and 4″/ 100 mm HV and Tilting models of the Rotary tables, simply by reversing the body of it in upside down position. Vices & Work Holding. Measuring Tools & Equipments. Jewellery & Watch Making&########x9. Do It Yourself (DIY Tools)&########x9. HSS Cutting & Finishing Tools. 4”Inch II100mm HV Rotary Milling Table+M6 Clamp Kit+ Suitable Tailstock w/ Vise. You will be glad to know that our tools are being manufactured in our own production facility in New Delhi (India) and are being inspected to ensure that they meet the required International quality benchmark as well as the expectations of our customers. We hold the Inventory of our good sellers in the USA & UK to offer the quickest possible deliveries to our customers. Pls note:- 1/. It is important to note that after the pandemic, although the logistic services have been improved a lot. However, they are still to reach their original positions. We expect our customers to understand and support us in such issues which are unforeseen and not in our control. However, we take complete onus and responsibility of supplying you with a completely brand-new product without any manufacturing or transit damage. Though we packed our goods with utmost care and strong packaging material, since our products are heavy, there could be transit damage in a few cases. However, it has been seen that such issues are not always a problem and our customers could still use them. In the majority of the cases, we have experienced that we manage to resolve the issue amicably without any trouble. So a discussion is the best way of a desired resolution. SEE OUR OTHER ITEMS FOR SALE. 80 mm 4 Jaws Independent Dog chuck with Back Plate & T nuts – (USA FULFILLED). 3 Pieces Spring Caliper Set – Inside, Outside & Divider 6 inch (USA FULFILLED). KNURLING TOOL PIVOT HEAD DIAMOND METRIC PITCHES PATTERN 1/2 SQ. Assorts Ball Turning Attachment (Exclusive Feature of Bearing Base) ROUND BASE. Single wheel knurling tool holder with 5 spare HSS knurls (USA FULFIILED). 4 (100 MM) ROTARY TABLE WITH 65MM 3 JAWS & 70MM 4 JAWS WITH BACK PLATE & TNUTS. Automatic Center Punch with Replaceable Hardened Steel Tip tool (USA FULFILLED). T-HANDLE TAP WRENCH SET OF 3 PCS SOLID COLLET JAWS – (USA FULFILLED). Supreme die holder with chuck. Single Wheel Straight Linear Knurling Hand Tool 3/4″ x 3/4″ x 5 (USA FULFILLED). Clamp Type Lathe Knurling Tools II 3/8″ Sq x Long 5-3/4″ Inch Tail (USA FULFILL). 4 regular Rotary Table +70 mm 4 Jaw Chuck+ Back Plate+ Fixing USA FULFILLED. Floating Tailstock Die holder 2MT Shank-Imperial Dies – USA FULFILLED. Spring Loaded Clamp Type Knurling Tool 2″ Capacity 3/8″ Hand Tools USA FULFILLED. HV6-4 Slots Rotary Table & Steel Dividing Plates Set USA FULFILLED. SLITTING/SLOTTING SAW HOLDER WITH CIRCULAR SAW BLADE – USA Fulfilled. New Mini V-Clamp Adjustable Spring Type Knurling Tool. Lathe Tailstock Die Holder – Tapping Threading Reaming Drilling Tools (MT3). Assorts Lathe Tool Ball Turning Attachment Oval Base- Single Bit (USA FULFILLED). Spindle Live Revolving Center, Morse Taper MT4 with Interchangeable Tips. Listing and template services provided by inkFrog.
4''Inch II100mm HV Rotary Table+M6 Clamp Kit+ Tailstock with Vise (USA Fulfilled)
4inch, clamp, fulfilled, ii100mm, rotary, tablem6, tailstock, vise
4inch_Rotary_Table_100mm_4slot_With_Set_Of_M6_Clamping_Kit_Horizontal_Vertic_01_jcg

4inch Rotary Table 100mm/4slot With Set Of M6 Clamping Kit Horizontal & Vertic

4inch Rotary Table 100mm/4slot With Set Of M6 Clamping Kit Horizontal & Vertic
4inch Rotary Table 100mm/4slot With Set Of M6 Clamping Kit Horizontal & Vertic
4inch Rotary Table 100mm/4slot With Set Of M6 Clamping Kit Horizontal & Vertic
4inch Rotary Table 100mm/4slot With Set Of M6 Clamping Kit Horizontal & Vertic
4inch Rotary Table 100mm/4slot With Set Of M6 Clamping Kit Horizontal & Vertic
4inch Rotary Table 100mm/4slot With Set Of M6 Clamping Kit Horizontal & Vertic
4inch Rotary Table 100mm/4slot With Set Of M6 Clamping Kit Horizontal & Vertic

4inch Rotary Table 100mm/4slot With Set Of M6 Clamping Kit Horizontal & Vertic
4inch ROTARY TABLE 100MM/4SLOT + CLAMPING KIT M6. Rotary table with clamping kit m6. This will fit both the Horizontal & Tilting model of our 3″ (75 mm) & 4″ (100 mm) Rotary – 4 Slots Table. This Set includes Following: 2 x step blocks 2 x tee bolts with flanged nut 2 x clamps Bolt length: 55 mm overall & Bolt Thread M6. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Can be used both Vertically & Horizontally. ROTARY TABLE WITH CLAMPING KIT M6 4 INCH ROTARY TABLE 4″ Chuck Diameter : 100 mm / 4″ Vertical center Height : 2-1/16 Hand Wheel can be set to Zero Hand Wheel Graduated in 10 Min Divisions Can be used both Vertically & Horizontally. CLAMPING KIT M 6 These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “sputniktools” and is located in this country: IN. This item can be shipped worldwide.
  • Setting Position: Horizontal/Vertical
  • Operation: Manual
  • Brand: RUTWIK ENGINEERS

4inch Rotary Table 100mm/4slot With Set Of M6 Clamping Kit Horizontal & Vertic
100mm4slot, 4inch, clamping, horizontal, rotary, table, vertic