3_80mm_Rotary_Table_With_Suitable_Tailstock_M6_ClampKit_Vice_Round_Vise_Milling_01_pg

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 ROTARY TABLE WITH 80mm ROUND VICE, TAILSTOCK & CLAMPING KIT. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max) : 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″, Rotary Table 3″ Tilting, Rotary Table 4″, Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. DESCRIPTION FOR 80mm ROUND VICE. Vice Diameter of Base: 3 (80mm). Vice Jaw Width: 2-7/16 (62mm). Vice Jaw Depth: 3/4 (19mm). Vice Jaw Opening: 1-5/8 (27mm). Vice Height: 1-1/4 (31mm). Made of high grade close grained seasoned cast Iron. Fits our 3″ (80mm) & 4″ (100mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. These vices are counter- drilled in a manner that these can fit to a 3 as well 4 slot table. DESCRIPTION FOR CLAMPING KIT. Length Of Clamp : 2-1/2 (63mm). Width Of Clamp : 1 (25mm). Hole Of Clamp : 5/16 (8mm). Thickness of Clamp : 1/2 (13mm). Length Of Block : 1-1/2 (38mm). Width Of Block : 1 (25mm). Height Of Block : 1 (25mm). These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Includes 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. KIT INCLUDES : ROTARY TABLE + ROUND VICE + TAILSTOCK + CLAMPING KIT + T-NUTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in this country: IN. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Custom Bundle: No
  • Setting Position: Horizontal / Vertical
  • Tilting: No
  • Rotary Table Height: 1-5/8\
  • Packing: Hard Board Box
  • Free shipping To: USA, UK, Italy, Spain, France, Mexico
  • Table Scale Graduated: 5 Degree
  • Single Bolt Tailstock Suitable For: Rotary Table 3\
  • Tailstock Dead Center Height (Min – Max): 1-7/16\
  • Rotary Table Dia.: 3-1/8\
  • Rotary Table Slots: 4
  • Operation: Manual
  • Vice Diameter of Base: 3\
  • Vice Jaw Width: 2-7/16\
  • Vice Jaw Depth: 3/4\
  • Vice Jaw Opening: 1-5/8\
  • Vice Height: 1-1/4\
  • Rotary Table Hand Wheel Calibrated To: 10 degree per revolution
  • Kit Includes: ROTARY TABLE, ROUND VICE, TAILSTOCK, CLAMPING KIT & T-NUTS
  • Brand: AUZAAR

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
80mm, clampkit, milling, rotary, suitable, table, tailstock, vice, vise
next page
3_80mm_Rotary_Table_With_Suitable_Tailstock_M6_ClampKit_Vice_Round_Vise_Milling_01_fr

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 ROTARY TABLE WITH 80mm ROUND VICE, TAILSTOCK & CLAMPING KIT. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max) : 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″, Rotary Table 3″ Tilting, Rotary Table 4″, Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. DESCRIPTION FOR 80mm ROUND VICE. Vice Diameter of Base: 3 (80mm). Vice Jaw Width: 2-7/16 (62mm). Vice Jaw Depth: 3/4 (19mm). Vice Jaw Opening: 1-5/8 (27mm). Vice Height: 1-1/4 (31mm). Made of high grade close grained seasoned cast Iron. Fits our 3″ (80mm) & 4″ (100mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. These vices are counter- drilled in a manner that these can fit to a 3 as well 4 slot table. DESCRIPTION FOR CLAMPING KIT. Length Of Clamp : 2-1/2 (63mm). Width Of Clamp : 1 (25mm). Hole Of Clamp : 5/16 (8mm). Thickness of Clamp : 1/2 (13mm). Length Of Block : 1-1/2 (38mm). Width Of Block : 1 (25mm). Height Of Block : 1 (25mm). These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Includes 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. KIT INCLUDES : ROTARY TABLE + ROUND VICE + TAILSTOCK + CLAMPING KIT + T-NUTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in this country: IN. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Custom Bundle: No
  • Setting Position: Horizontal / Vertical
  • Tilting: No
  • Rotary Table Height: 1-5/8\
  • Packing: Hard Board Box
  • Free shipping To: USA, UK, Italy, Spain, France, Mexico
  • Table Scale Graduated: 5 Degree
  • Single Bolt Tailstock Suitable For: Rotary Table 3\
  • Tailstock Dead Center Height (Min – Max): 1-7/16\
  • Rotary Table Dia.: 3-1/8\
  • Rotary Table Slots: 4
  • Operation: Manual
  • Vice Diameter of Base: 3\
  • Vice Jaw Width: 2-7/16\
  • Vice Jaw Depth: 3/4\
  • Vice Jaw Opening: 1-5/8\
  • Vice Height: 1-1/4\
  • Rotary Table Hand Wheel Calibrated To: 10 degree per revolution
  • Kit Includes: ROTARY TABLE, ROUND VICE, TAILSTOCK, CLAMPING KIT & T-NUTS
  • Brand: AUZAAR

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
80mm, clampkit, milling, rotary, suitable, table, tailstock, vice, vise
next page
3_80mm_Rotary_Table_With_Suitable_Tailstock_M6_ClampKit_Vice_Round_Vise_Milling_01_mopc

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 ROTARY TABLE WITH 80mm ROUND VICE, TAILSTOCK & CLAMPING KIT. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max). 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″, Rotary Table 3″ Tilting, Rotary Table 4″, Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. DESCRIPTION FOR 80mm ROUND VICE. Vice Diameter of Base: 3 (80mm). Vice Jaw Width: 2-7/16 (62mm). Vice Jaw Depth: 3/4 (19mm). Vice Jaw Opening: 1-5/8 (27mm). Vice Height: 1-1/4 (31mm). Made of high grade close grained seasoned cast Iron. Fits our 3″ (80mm) & 4″ (100mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. These vices are counter- drilled in a manner that these can fit to a 3 as well 4 slot table. DESCRIPTION FOR CLAMPING KIT. Length Of Clamp : 2-1/2 (63mm). Width Of Clamp : 1 (25mm). Hole Of Clamp : 5/16 (8mm). Thickness of Clamp : 1/2 (13mm). Length Of Block : 1-1/2 (38mm). Width Of Block : 1 (25mm). Height Of Block : 1 (25mm). These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Includes 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. KIT INCLUDES : ROTARY TABLE + ROUND VICE + TAILSTOCK + CLAMPING KIT + T-NUTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolinghub” and is located in this country: IN. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Custom Bundle: No
  • Setting Position: Horizontal/Vertical
  • Tilting: No
  • Vice Height: 1-1/4\
  • Rotary Table Hand Wheel Calibrated To: 10 degree per revolution
  • Kit includes: ROTARY TABLE, ROUND VICE, TAILSTOCK, CLAMPING KIT & T-NUTS
  • Rotary Table Height: 1-5/8\
  • Packing: Hard Board Box
  • Free shipping To: USA, UK, Italy, Spain, France, Mexico
  • Table Scale Graduated: 5 Degree
  • Single Bolt Tailstock Suitable For: Rotary Table 3\
  • Operation: Manual
  • ailstock Dead Center Height (Min – Max): 1-7/16\
  • Rotary Table Dia.: 3-1/8\
  • Rotary Table Slots: 4
  • Vice Diameter of Base: 3\
  • Vice Jaw Width: 2-7/16\
  • Vice Jaw Depth: 3/4\
  • Vice Jaw Opening: 1-5/8\
  • Brand: ToolingHub
  • UPC: 369251307185

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
80mm, clampkit, milling, rotary, suitable, table, tailstock, vice, vise
next page
80mm_3_Rotary_Table_4_Slot_Horizontal_Vertical_Milling_Anchor_01_ilc

80mm 3 Rotary Table 4 Slot Horizontal Vertical Milling Anchor

80mm 3 Rotary Table 4 Slot Horizontal Vertical Milling Anchor
80mm 3 Rotary Table 4 Slot Horizontal Vertical Milling Anchor
80mm 3 Rotary Table 4 Slot Horizontal Vertical Milling Anchor
80mm 3 Rotary Table 4 Slot Horizontal Vertical Milling Anchor
80mm 3 Rotary Table 4 Slot Horizontal Vertical Milling Anchor

80mm 3 Rotary Table 4 Slot Horizontal Vertical Milling Anchor
80mm 3 Rotary Table 4 Slot Horizontal Vertical Milling Anchor. Table Height : 44mm (1-5/8). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “enter_2655″ and is located in this country: IN. This item can be shipped worldwide.
  • Setting Position: Horizontal/Vertical
  • Brand: Unbranded
  • Table Height:: 44mm (1-5/8\
  • Table Slots:: 4
  • Hand Wheel calibrated To:: 10 degree per revolution
  • Table Dia:: 80mm (3-1/8\
  • Table Scale Graduated:: 5 Degree

80mm 3 Rotary Table 4 Slot Horizontal Vertical Milling Anchor
80mm, anchor, horizontal, milling, rotary, slot, table, vertical
next page
3_80mm_Rotary_Table_With_Tailstock_M6_Clamp_Kit_Milling_Vice_80mm_Round_Vise_01_hna

3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise

3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise

3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 ROTARY TABLE WITH 80mm ROUND VICE, TAILSTOCK & CLAMPING KIT. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max) : 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″, Rotary Table 3″ Tilting, Rotary Table 4″, Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. DESCRIPTION FOR 80mm ROUND VICE. Vice Diameter of Base: 3 (80mm). Vice Jaw Width: 2-7/16 (62mm). Vice Jaw Depth: 3/4 (19mm). Vice Jaw Opening: 1-5/8 (27mm). Vice Height: 1-1/4 (31mm). Made of high grade close grained seasoned cast Iron. Fits our 3″ (80mm) & 4″ (100mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. These vices are counter- drilled in a manner that these can fit to a 3 as well 4 slot table. DESCRIPTION FOR CLAMPING KIT. Length Of Clamp : 2-1/2 (63mm). Width Of Clamp : 1 (25mm). Hole Of Clamp : 5/16 (8mm). Thickness of Clamp : 1/2 (13mm). Length Of Block : 1-1/2 (38mm). Width Of Block : 1 (25mm). Height Of Block : 1 (25mm). These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Includes 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. KIT INCLUDES : ROTARY TABLE + ROUND VICE + TAILSTOCK + CLAMPING KIT + T-NUTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in this country: IN. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Custom Bundle: No
  • Setting Position: Horizontal / Vertical
  • Tilting: No
  • Rotary Table Height: 1-5/8\
  • Packing: Hard Board Box
  • Free shipping To: USA, UK, Italy, Spain, France, Mexico
  • Table Scale Graduated: 5 Degree
  • Single Bolt Tailstock Suitable For: Rotary Table 3\
  • Tailstock Dead Center Height (Min – Max): 1-7/16\
  • Rotary Table Dia.: 3-1/8\
  • Rotary Table Slots: 4
  • Operation: Manual
  • Vice Diameter of Base: 3\
  • Vice Jaw Width: 2-7/16\
  • Vice Jaw Depth: 3/4\
  • Vice Jaw Opening: 1-5/8\
  • Vice Height: 1-1/4\
  • Rotary Table Hand Wheel Calibrated To: 10 degree per revolution
  • Kit Includes: ROTARY TABLE, ROUND VICE, TAILSTOCK, CLAMPING KIT & T-NUTS
  • Brand: AUZAAR

3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
80mm, clamp, milling, rotary, table, tailstock, vice, vise
next page
3_80mm_Rotary_Table_With_Suitable_Tailstock_M6_ClampKit_Vice_Round_Vise_Milling_01_dxe

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 ROTARY TABLE WITH 80mm ROUND VICE, TAILSTOCK & CLAMPING KIT. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max) : 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″, Rotary Table 3″ Tilting, Rotary Table 4″, Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. DESCRIPTION FOR 80mm ROUND VICE. Vice Diameter of Base: 3 (80mm). Vice Jaw Width: 2-7/16 (62mm). Vice Jaw Depth: 3/4 (19mm). Vice Jaw Opening: 1-5/8 (27mm). Vice Height: 1-1/4 (31mm). Made of high grade close grained seasoned cast Iron. Fits our 3″ (80mm) & 4″ (100mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. These vices are counter- drilled in a manner that these can fit to a 3 as well 4 slot table. DESCRIPTION FOR CLAMPING KIT. Length Of Clamp : 2-1/2 (63mm). Width Of Clamp : 1 (25mm). Hole Of Clamp : 5/16 (8mm). Thickness of Clamp : 1/2 (13mm). Length Of Block : 1-1/2 (38mm). Width Of Block : 1 (25mm). Height Of Block : 1 (25mm). These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Includes 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. KIT INCLUDES : ROTARY TABLE + ROUND VICE + TAILSTOCK + CLAMPING KIT + T-NUTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in this country: IN. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Custom Bundle: No
  • Setting Position: Horizontal / Vertical
  • Tilting: No
  • Rotary Table Height: 1-5/8\
  • Packing: Hard Board Box
  • Free shipping To: USA, UK, Italy, Spain, France, Mexico
  • Table Scale Graduated: 5 Degree
  • Single Bolt Tailstock Suitable For: Rotary Table 3\
  • Tailstock Dead Center Height (Min – Max): 1-7/16\
  • Rotary Table Dia.: 3-1/8\
  • Rotary Table Slots: 4
  • Operation: Manual
  • Vice Diameter of Base: 3\
  • Vice Jaw Width: 2-7/16\
  • Vice Jaw Depth: 3/4\
  • Vice Jaw Opening: 1-5/8\
  • Vice Height: 1-1/4\
  • Rotary Table Hand Wheel Calibrated To: 10 degree per revolution
  • Kit Includes: ROTARY TABLE, ROUND VICE, TAILSTOCK, CLAMPING KIT & T-NUTS
  • Brand: AUZAAR

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
80mm, clampkit, milling, rotary, suitable, table, tailstock, vice, vise
next page
3_80mm_Rotary_Table_With_Tailstock_M6_Clamp_Kit_Milling_Vice_80mm_Round_Vise_01_urjn

3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise

3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise

3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 ROTARY TABLE WITH 80mm ROUND VICE, TAILSTOCK & CLAMPING KIT. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max) : 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″, Rotary Table 3″ Tilting, Rotary Table 4″, Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. DESCRIPTION FOR 80mm ROUND VICE. Vice Diameter of Base: 3 (80mm). Vice Jaw Width: 2-7/16 (62mm). Vice Jaw Depth: 3/4 (19mm). Vice Jaw Opening: 1-5/8 (27mm). Vice Height: 1-1/4 (31mm). Made of high grade close grained seasoned cast Iron. Fits our 3″ (80mm) & 4″ (100mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. These vices are counter- drilled in a manner that these can fit to a 3 as well 4 slot table. DESCRIPTION FOR CLAMPING KIT. Length Of Clamp : 2-1/2 (63mm). Width Of Clamp : 1 (25mm). Hole Of Clamp : 5/16 (8mm). Thickness of Clamp : 1/2 (13mm). Length Of Block : 1-1/2 (38mm). Width Of Block : 1 (25mm). Height Of Block : 1 (25mm). These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Includes 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. KIT INCLUDES : ROTARY TABLE + ROUND VICE + TAILSTOCK + CLAMPING KIT + T-NUTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in this country: IN. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Custom Bundle: No
  • Setting Position: Horizontal / Vertical
  • Tilting: No
  • Rotary Table Height: 1-5/8\
  • Packing: Hard Board Box
  • Free shipping To: USA, UK, Italy, Spain, France, Mexico
  • Table Scale Graduated: 5 Degree
  • Single Bolt Tailstock Suitable For: Rotary Table 3\
  • Tailstock Dead Center Height (Min – Max): 1-7/16\
  • Rotary Table Dia.: 3-1/8\
  • Rotary Table Slots: 4
  • Operation: Manual
  • Vice Diameter of Base: 3\
  • Vice Jaw Width: 2-7/16\
  • Vice Jaw Depth: 3/4\
  • Vice Jaw Opening: 1-5/8\
  • Vice Height: 1-1/4\
  • Rotary Table Hand Wheel Calibrated To: 10 degree per revolution
  • Kit Includes: ROTARY TABLE, ROUND VICE, TAILSTOCK, CLAMPING KIT & T-NUTS
  • Brand: AUZAAR

3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
80mm, clamp, milling, rotary, table, tailstock, vice, vise
next page
3_80mm_Tilting_Rotary_Table_with_70mm_4_jaw_Independent_Chuck_M6_Clamp_Kit_01_ikq

3 / 80mm Tilting Rotary Table with 70mm 4 jaw Independent Chuck M6 Clamp Kit

3 / 80mm Tilting Rotary Table with 70mm 4 jaw Independent Chuck M6 Clamp Kit
3 / 80mm Tilting Rotary Table with 70mm 4 jaw Independent Chuck M6 Clamp Kit
3 / 80mm Tilting Rotary Table with 70mm 4 jaw Independent Chuck M6 Clamp Kit
3 / 80mm Tilting Rotary Table with 70mm 4 jaw Independent Chuck M6 Clamp Kit

3 / 80mm Tilting Rotary Table with 70mm 4 jaw Independent Chuck M6 Clamp Kit
NEW PRECISION QUALITY 3/ 80 MM TILTING ROTARY TABLE, FEATURES TILTED & LOCKED AT ANY ANGLE BTW 0- 90 DEGREES. SUPPLIED WITH A 70 MM 4 JAW INDEPENDENT CHUCK WITH BACK PLATE & FIXING T NUTS BOLTS. BACK PLATE IS DRILLED IN A MANNER THAT IT WILL FIT BOTH TO A 3 AS WELL AS 4 SLOT ROTARY TABLE. WORM GEAR RATION IS 1:36, WHICH MEANS 1 HANDLE ROTATION SHALL TURN THE TABLE BY 10 DEGREES. CAN BE MOUNTED HORIZONTALLY AND VERTICALLY BOTH. TO USA & WORLWIDE. The item “3 / 80mm Tilting Rotary Table with 70mm 4 jaw Independent Chuck M6 Clamp Kit” is in sale since Tuesday, June 1, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “globaltools2016″ and is located in Delhi, Delhi. This item can be shipped worldwide.
  • Setting Position: Horizontal/Vertical
  • Operation: Manual
  • MPN: Does Not Apply
  • Brand: Unbranded

3 / 80mm Tilting Rotary Table with 70mm 4 jaw Independent Chuck M6 Clamp Kit
70mm, 80mm, chuck, clamp, independent, rotary, table, tilting
next page
3_80mm_Rotary_Table_With_Tailstock_M6_Clamp_Kit_Milling_Vice_80mm_Round_Vise_01_vz

3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise

3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise

3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
3 ROTARY TABLE WITH 80mm ROUND VICE, TAILSTOCK & CLAMPING KIT. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 44mm (1-5/8). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max) : 37mm (1-7/16″) – 92mm (3-5/8″). This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. DESCRIPTION FOR 80mm ROUND VISE. Vise Diameter of Base: 80mm (3). Vise Jaw Width: 62mm (2-7/16). Vise Jaw Depth: 19mm (3/4). Vise Jaw Opening: 27mm (1-5/8). Vise Height: 31mm (1-1/4). Made of high grade close grained seasoned cast Iron. Fits our 80mm (3″) & 100mm (4″) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. These vises are counter- drilled in a manner that these can fit to a 3 as well 4 slot table. DESCRIPTION FOR CLAMPING KIT. Length Of Clamp : 63mm (2-1/2). Width Of Clamp : 25mm (1). Hole Of Clamp : 8mm (5/16). Thickness of Clamp : 13mm (1/2). Length Of Block : 38mm (1-1/2). Width Of Block : 25mm (1). Height Of Block : 25mm (1). These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Includes 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. KIT INCLUDES : ROTARY TABLE + ROUND VICE + TAILSTOCK + CLAMPING KIT + T-NUTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. The item “3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise” is in sale since Saturday, October 2, 2021. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in DELHI, DELHI. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Custom Bundle: No
  • Setting Position: Horizontal / Vertical
  • Tilting: No
  • Free shipping To: UK
  • Kit Includes: ROTARY TABLE, ROUND VICE, TAILSTOCK, CLAMPING KIT & T-NUTS
  • Packing: Hard Board Box
  • Rotary Table Dia.: 80mm (3-1/8″)
  • Rotary Table Hand Wheel Calibrated To: 10 degree per revolution
  • Rotary Table Height: 44mm (1-5/8″)
  • Rotary Table Slots: 4
  • Operation: Manual
  • MPN: Does Not Apply
  • Single Bolt Tailstock Suitable For: Rotary Table 3″ & 4″
  • Table Scale Graduated: 5 Degree
  • Tailstock Dead Center Height (Min – Max): 37mm (1-7/16″) – 92mm (3-5/8″)
  • Brand: AUZAAR
  • Vise Diameter of Base: 80mm (3″)
  • Vise Jaw Width: 62mm (2-7/16″)
  • Vise Jaw Depth: 19mm (3/4″)
  • Vise Jaw Opening: 27mm (1-5/8″)
  • Vise Height: 31mm (1-1/4″)

3 80mm Rotary Table With Tailstock M6 Clamp Kit & Milling Vice 80mm Round Vise
80mm, clamp, milling, rotary, table, tailstock, vice, vise
next page
3_80mm_Rotary_Table_With_Suitable_Tailstock_M6_ClampKit_Vice_Round_Vise_Milling_01_znel

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 ROTARY TABLE WITH 80mm ROUND VICE, TAILSTOCK & CLAMPING KIT. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max). 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. DESCRIPTION FOR 80mm ROUND VICE. Vice Diameter of Base: 3 (80mm). Vice Jaw Width: 2-7/16 (62mm). Vice Jaw Depth: 3/4 (19mm). Vice Jaw Opening: 1-5/8 (27mm). Vice Height: 1-1/4 (31mm). Made of high grade close grained seasoned cast Iron. Fits our 3″ (80mm) & 4″ (100mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. These vices are counter- drilled in a manner that these can fit to a 3 as well 4 slot table. DESCRIPTION FOR CLAMPING KIT. Length Of Clamp : 2-1/2 (63mm). Width Of Clamp : 1 (25mm). Hole Of Clamp : 5/16 (8mm). Thickness of Clamp : 1/2 (13mm). Length Of Block : 1-1/2 (38mm). Width Of Block : 1 (25mm). Height Of Block : 1 (25mm). These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Includes 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. KIT INCLUDES : ROTARY TABLE + ROUND VICE + TAILSTOCK + CLAMPING KIT + T-NUTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. The item “3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling” is in sale since Monday, June 28, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolinghub” and is located in DELHI, DELHI. This item can be shipped worldwide.
  • Vice Height: 1-1/4″ (31mm)
  • Rotary Table Hand Wheel Calibrated To: 10 degree per revolution
  • Kit includes: ROTARY TABLE, ROUND VICE, TAILSTOCK, CLAMPING KIT & T-NUTS
  • Rotary Table Height: 1-5/8″ (44mm)
  • Packing: Hard Board Box
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Custom Bundle: No
  • Setting Position: Horizontal/Vertical
  • Tilting: No
  • Free shipping To: USA, UK, Italy, Spain, France, Mexico
  • Table Scale Graduated: 5 Degree
  • Single Bolt Tailstock Suitable For: Rotary Table 3″ & 4″
  • ailstock Dead Center Height (Min – Max): 1-7/16″ (37mm) – 3-5/8″ (92mm)
  • Rotary Table Dia.: 3-1/8″ (80 mm)
  • Operation: Manual
  • MPN: Does Not Apply
  • Brand: ToolingHub
  • Rotary Table Slots: 4
  • Vice Diameter of Base: 3″ (80mm)
  • Vice Jaw Width: 2-7/16″ (62mm)
  • Vice Jaw Depth: 3/4″ (19mm)
  • Vice Jaw Opening: 1-5/8″ (27mm)

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
80mm, clampkit, milling, rotary, suitable, table, tailstock, vice, vise
next page