machine
HV6- 6 (150mm) 4 slots Rotary Table Horizontal Vertical for Milling Machine
HV6- 6 (150mm) 4 slots Rotary Table Horizontal Vertical for Milling Machine. Manufactured from High grade seasoned casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1 Center Bore MT-2 T Slot 16mm. Horizontal Height : Approx 80mm from Base to Top surface of Chuck Satin Chrome Dials. This will fit both the Horizontal & Tilting model of HV4 & HV6 Rotary Tables This Set includes Following: 2 x step blocks 2 x tee bolts with flanged nut 2 x clamps Bolt Thread M8.
3/ 80mm Rotary Table with Chuck and Tailstock Milling Indexing Machine Tools
A PERFECT MILLING COMBO FOR YOUR S SMALL MILLING MACHINE NEEDS. SET INCLUDES A LOW PROFILE 80 MM DIAMETER ROTARY TABLE, 1 SET OF CHUCK With BACK PLATES & T NUTS BOLTS WITH A SUITABLE TAILSTOCK. THE ROTARY TABLE AND CHUCK ASSEMBLY CAN BE MOUNTED BOTH HORIZONTALLY & VERTICALLY. WORM : GEAR RATION IS 1: 10, THAT MEANS ONE HANDLE ROTATION TURNS THE 360 DEGREES GRADUATION TABLE BY 10 DEGREES. TO USA & WORLDWIDE.
4 Inches (100 mm) Rotary Table 4 Slot for Milling Machine + M6 clamp kit
4″ (100 mm) Small Mini Rotary Table-4 SLOTS SIZE: 4″INCH ROTARY TABLE DIAMETER 4-100 MM HORIZONTAL / VERTICAL CLAMPING UNIT HORIZONTAL ONLY 53 mm TABLE CALIBRATED 0-360 DEGREES TABLE 36-1 RATIO, WHICH MEANS ONE TURN OF THE HANDLE ROTATE 10 DEGREE OF THE TABLE. ENABLE THE USER TO DRILL OR CUT ANY WORK AT AN EXACT INTERVAL AROUND A FIXED AXIS (GENERALLY VERTICAL OR HORIZONTAL) SUITABLE M6 CLAMP KIT FOR THIS ROTARY TABLE This will fit both the Horizontal & Tilting model of our 3″ (75 mm) & 4″ (100 mm) Rotary – 4 Slots Table This Set includes Following: 2 x step blocks 2 x tee bolts with flanged nut M6 thread 2 x clamps Bolt length: 55 mm overall & Bolt Thread M6 4 (100 mm) SMALL MINI ROTARY TABLE 4 SLOTS. SUPPLIED WITH M6 CLAMP KIT. VERTICAL CLAMPING UNIT HORIZONTAL ONLY 53 mm. TABLE CALIBRATED 0-360 DEGREES TABLE 36-1 RATIO, WHICH MEANS ONE TURN OF THE HANDLE ROTATE 10 DEGREE OF THE TABLE. SUPPLIED WITH A M6 THREAD CLAMP KIT-SUITABLE FOR WORK HOLD/ CLAMPING ON THIS TABLE.
Rotary Table 3 80mm Precision for Milling Machine Horizontal & Vertical 4 Slots
3 80mm ROTARY TABLE HORIZONTAL / VERTICAL WITH 4 MILLING SLOTS. Table Height : 44mm (1-5/8). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments.
HV6- 6 (50 mm) Rotary Table 3 Slots Horizontal Vertical for Milling Machine
HV6- 6 (50 mm) Rotary Table 3 Slots Horizontal Vertical for Milling Machine. HV6 Rotary Table, Dividing Plate, Rotary Table Diameter :150 mm (6″) Overall Height : 80 mm (3-1/4″) Centre Height in Vertical Position: 105 mm Worm- Gear Ratio- 1:90, which means that the 1 handle rotation shall turn the table by 4 Degrees. Table Graduated 360 Degrees, Resettable Dial & Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds. Centre Bore of the Table: 2MT 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. Supplied with Dividing Plate Set for Indexing for a total Indexing solution. Safety & Operation manual is also supplied.
Rotary Table 4/ 100 mm Precision For Milling Machine Horizontal And Vertical
Table Height : 2-1/16 (52 mm). Can be used in both horizontal & vertical position. Table graduated in 360 Degrees. The scale calibrated in 5 degree increment. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Condition : Wrong product or damaged product delivered.
HV6 diameter 150mm vertical and horizontal dual purpose milling machine
HV6 diameter 150mm vertical and horizontal dual purpose milling machine horizontal vertical rotary table high precision. HVTSL type vertical horizontal dividing head is one of the main accessories of milling machine, milling machine can be used in indexing drilling or milling, boring, cutting circular countersink flat etc.. When the working platform is used in conjunction with the tail seat, the more complicated work can be carried out by the circumference of the cutting and milling. We will track the item all the time until it is reached to you. Return accepted in 30 days after the item reached to you. Return package must be in the original packaging, everything must be in new condition. If you have a question or concern before or after receiving your item, please do not hesitate to contact our customer service team by clicking on the “Ask a question” link in the bottom left. Your satisfaction is guaranteed.
Rotary Table 3 80mm Precision for Milling Machine Horizontal & Vertical 4 Slots
3 80mm ROTARY TABLE HORIZONTAL / VERTICAL WITH 4 MILLING SLOTS. Table Height : 44mm (1-5/8). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments.