Month: February 2021
Hv4 Rotary Table(4 Slot) With 80mm Self Centering Chuck & Backplate
With 80 mm Self Centering Chuck & Back plate. Rotary Table HV4 with 80 mm Self Centering Chuck & Back plate. Our Rotary Table HV4 is having a Table Diameter : 110 mm (4-3/8). Table Height: 80 mm (3 -1/8). Worm Gear Ratio – 1:90, which means that 1 handle rotation shall turn the table by 4 Degrees. Center Bore of the Table MT2. Table Graduated 360 Degrees. Hand wheel graduated in seconds. Vernier scale is ca liberated to 10 seconds. 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. It is combined with a high Quality 80 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate, fixing tee nuts with screws, 80 mm Self Centering Chuck, Tailstock for HV4 and HV6, & Indexing Plate Set. Designed to fit our 3 or 4 Rotary table with either 3 or 4 slots. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “HV4 ROTARY TABLE(4 SLOT) WITH 80MM SELF CENTERING CHUCK & BACKPLATE” is in sale since Thursday, October 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
HV6 ROTARY TABLE 3Slot+ TAILSTOCK + INDEXING PLATES SET
HV6 ROTARY TABLE+ TAILSTOCK + INDEXING PLATES SET. Vertical centre height 105mm. One turn = 4 degrees. Table graduated 360 degrees. Vernier scale is calibrated to 10 sec. Supplied with Dividing Plate Set for Indexing & a Tailstock for a total Indexing solution. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. This Combination completes with TAILSTOCK, it is USED BETWEEN CENTRE to Center WORK IS REQUIRED. It is ADJUSTABLE FOR DIFFERENT HEIGHTS 80MM TO 110MM. The item “HV6 ROTARY TABLE 3Slot+ TAILSTOCK + INDEXING PLATES SET” is in sale since Tuesday, November 24, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
VERTEX HV-8 (4-Slot) 8 Horizontal/Vertical Rotary Table (Sold As is) Minor blem
Item is New with manufacture blemish (chip on the based). Unit is function and perform 100%. Our Tables are made of high density Meehanite and use “HEIDENHAIN” electronic equipment to inspect angle to assure the excellent quality and durableness. Use excellent machining center to process. Spindle end be applied accuracy bearing. Can be assured to keep very steady under load cutting. Worm is hardened and ground. The ratio is 90:1. The work table is graduated a full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1’min. And vernier scale makes settings down to 10 seconds possible. These Rotary Tables are popular for their excellent performance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work. Using the Key guide block, the center can be corrected quickly and accurately. If You have any questions regarding this item, please let us know we’ll be happy to help. The item “VERTEX HV-8 (4-Slot) 8 Horizontal/Vertical Rotary Table (Sold As is) Minor blem” is in sale since Tuesday, February 23, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped worldwide.
- Brand: VERTEX
- MPN: HV-8-4
- Country/Region of Manufacture: Taiwan
- Model: HV-8 (4 slots)
Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK
Rotary Table Horizontal & Vertical 4 / 100 mm with. 65 mm Lathe Chuck & Back plate for Milling Machine. Vertical center Height : 2-1/16 (Approx 51 mm). Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. Calibrated in 5 Min Increment around the rim. Can be used both Vertical & Horizontal. This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is Required. These are adjustable for different hieghts & also having fine feed centre point and the centre tip is hardend and Ground. It is made up of good grade of cast iron. It is Very useful product to use. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK” is in sale since Thursday, October 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Tilting: No
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Unbranded
Rotary table 6 Horizontal & Vertical 3 Slot with Adjustable Tailstock
PRECISION ROTARY TABLE 6 3 Slot with Adjustable Tailstock. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80mm from Base to Top surface of Chuck. Graduated 360 degree around its circumference. Tailstock for Rotary Table 6. It is an adjustable height tailstock used when you need to support a long part held in the rotary table- such as cutting a spline on a shaft. Precision made of heavy cast iron, it has a base for mounting to the mill table with T- bolts. Manufactured from Seasoned Grade Casting. Adjustable to Center Heights from 85 – 110 mm. The item “Rotary table 6 Horizontal & Vertical 3 Slot with Adjustable Tailstock” is in sale since Monday, November 9, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Other CNC, Metalworking & Manufacturing”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- MPN: Does Not Apply
- Country/Region of Manufacture: India
- Custom Bundle: No
- Brand: Unbranded
6 (150 mm) HV6-4 Slots Rotary Table With Clamping Kit (M8) for Milling
Can be used both Vertically & Horizontally. Engage & Disengage Function for manual indexing. Clamping Kit For HV4 / HV5 / HV6. This clamping kit includes. 2 LN Screws (M8 thread). With 2 Flange Nuts & 2 Tee-nuts. Made of High Quality Tool Steel. These are polished & ground from all sides. Ideal for work holding on a table. This set makes things very flexible, and enables irregular shapes to be secured into place. We Believe in Quality. The item “6 (150 mm) HV6-4 Slots Rotary Table With Clamping Kit (M8) for Milling” is in sale since Saturday, December 19, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “daily_tools” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Brand: FACTORYTOOLS
Hv4 Rotary Table (4 Slot)+ Tailstock + Indexing Plates Set, M8 Clamping Kit Set
HV4 ROTARY TABLE+ TAILSTOCK + INDEXING PLATES SET. High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 110mm, Table Height 80mm, Centre Height 80mm. Centre Has a MT-2 Taper, Worm Gear Is 90-1. Vernier Scale Calibrated To 10 Seconds. Quick Release System for Manual Indexing. And Has 4 Tee Slots. Supplied with Dividing Plate Set for Indexing & a Tailstock for a total Indexing solution. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. This Combination completes with TAILSTOCK, it is USED BETWEEN CENTRE to Center WORK IS REQUIRED. It is ADJUSTABLE FOR DIFFERENT HEIGHTS 80MM TO 110MM. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “HV4 ROTARY TABLE (4 SLOT)+ TAILSTOCK + INDEXING PLATES SET, M8 CLAMPING KIT SET” is in sale since Thursday, October 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
3 round vice & 3(80mm) rotary table milling metal-cut. Free shipping
1: 3rotary table 1pcs. 2: 3 round vice 1 pcs. ROTARY TABLE -Table: 3. Diameter -Table Height: 1 5/8 -Base Dimensions: 4. 1/4 -Center Height in Vertical Position: 1. 11/16″ -T-Slots: 5/16″ -Operates in the Horizontal or Vertical position -Hand Wheel calibrated to 10 degrees per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increment ROUND VICE The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. The moving jaw has V-grooves to hold Round objects. Made of high grade close grain caste Iron. Fits our 3 (75 mm) Rotary Tables perfectly. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Diameter of Base : 80 mm Jaw Width : 54 mm Jaw Depth: 20 mm Jaw Opening : 32 mm Height : 29 mm. The item “3 round vice & 3(80mm) rotary table milling metal-cut. Free shipping” is in sale since Monday, March 16, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “easystreet_hangout” and is located in ghaziabad. This item can be shipped worldwide.
- Operation: Manual
- Modified Item: No
- MPN: Does Not Apply
- Country/Region of Manufacture: India
- Custom Bundle: No
- Unit Type: Unit
- Setting Position: Horizontal/Vertical
- Cross-Slide: No
- Tilting: No
- Unit Quantity: 1
- Brand: Unbranded
Hv4 Rotary Table With 80mm Chcuk, Tailstock, Backplate & Indexing Plates Set
With 80 mm Self Centering Chuck, Backplate. Tailstock for HV4 and HV6 & Indexing Plate Set. Rotary Table HV4 with 80 mm Self Centering Chuck & Backplate. Our Rotary Table HV4 is having a Table Diameter : 110 mm (4-3/8). Table Height: 80 mm (3 -1/8). Worm Gear Ratio – 1:90, which means that 1 handle rotation shall turn the table by 4 Degrees. Centre Bore of the Table MT2. Table Graduated 360 Degrees. Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds. 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. It is combined with a high Quality 80 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate, fixing tee nuts with screws, 80 mm Self Centering Chuck, Tailstock for HV4 and HV6, & Indexing Plate Set. Designed to fit our 3 or 4 Rotary table with either 3 or 4 slots. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play. Fit to our HV4 and HV6, Tilting Rotary Tables 100 mm. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. Tailstock for HV4 & HV6. Its made of good Quality of Cast Iron. Height is adjustable from 80 mm to 110 mm. It is used on our HV4 & HV6 ROTARY TABLE. It is USED WHEN BETWEEN CENTRE WORK IS REQUIRED. THESE ARE ADJUSTABLE FOR DIFFERENT HEIGHTS & Having fine feed centre point and the centre tip is hardened and Ground. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “HV4 ROTARY TABLE WITH 80MM CHCUK, TAILSTOCK, BACKPLATE & INDEXING PLATES SET” is in sale since Thursday, October 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded