Month: April 2022
4/100 Rotary Table With Small Chuck & Back Plate With 70 MM 4 Jaws Chuck-usa
Quality Tool Set of 4 Regular Rotary Table with 70 mm 4 Jaws Independent Chuck with Back Plate & fixingsT nut Bolts. Chuck Body is High Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table. It can be mounted both in Horizontal & vertical position. Hand wheel is graduated in divisions of 10 min & can be set to zero. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tools-shop2020″ and is located in this country: US. This item can be shipped to United States.
- Operation: Manual
- Setting Position: Horizontal/Vertical
- Brand: TOOL-SHOP2020
3 Inch Rotary Table 80mm HV With Vice 80mm Round Vise & Single Bolt Tailstock
3 ROTARY TABLE WITH 80mm ROUND VICE & SINGLE BOLT TAILSTOCK. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max) : 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″, Rotary Table 3″ Tilting, Rotary Table 4″, Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. DESCRIPTION FOR 80mm ROUND VICE. Vice Diameter of Base: 3 (80mm). Vice Jaw Width: 2-7/16 (62mm). Vice Jaw Depth: 3/4 (19mm). Vice Jaw Opening: 1-5/8 (27mm). Vice Height: 1-1/4 (31mm). Made of high grade close grained seasoned cast Iron. Fits our 3″ (80mm) & 4″ (100mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. These vices are counter- drilled in a manner that these can fit to a 3 as well 4 slot table. SUPPLIED WITH FIXING T-NUTS & BOLTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in this country: IN. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal / Vertical
- Tilting: No
- Rotary Table Height: 1-5/8\
- Packing: Hard Board Box
- Free shipping To: USA, UK, Italy, Spain, France, Mexico
- Table Scale Graduated: 5 Degree
- Single Bolt Tailstock Suitable For: Rotary Table 3\
- Tailstock Dead Center Height (Min – Max): 1-7/16\
- Rotary Table Dia.: 3-1/8\
- Rotary Table Slots: 4
- Operation: Manual
- Vice Diameter of Base: 3\
- Vice Jaw Width: 2-7/16\
- Vice Jaw Depth: 3/4\
- Vice Jaw Opening: 1-5/8\
- Vice Height: 1-1/4\
- Rotary Table Hand Wheel Calibrated To: 10 degree per revolution
- Brand: AUZAAR
M&M Tool Roto Grind Motorized Rotary Table. Model 710-V 10 3/4 Inch Air
M&M Tool-Roto Grind Motorized Rotary Table. Model 710-V s/n 3969. You are getting the item in the pictures. Pulled from a working machine shop. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “artizan” and is located in this country: US. This item can be shipped to United States.
- Brand: M & M Tool
- Tilting: No
- Custom Bundle: No
- Cross-Slide: No
- Setting Position: Horizontal/Vertical
- Operation: Air
- Modified Item: No
Yuasa SUDX 220 4th Axis Rotary Table Indexer with control, ID# R-012
Table Diameter: 220 mm. T-Slots: (6) 12 mm Radial. Electrics: 120v / 1ph/ 60Hz. Overall Dimensions, Table: 20″ LR x 11″ FB x 8 H. Approximate Weight, Table: 185 lbs. Overall Dimensions, Control: 15″ LR x 13″ FB x8 H. Approximate Weight, Control: 20 lbs. UDNC – 100 Controller. NOTE: Control lights up & fan comes on when powered up. We can not get the table to move. If information is needed to help you do so, please send us a message. Cash, wire transfers, or company checks are welcome and encouraged. This guarantee applies only to machines, which we own. Shall not be responsible for any damages done by truckers, riggers, or other parties. All machine prices include loading unless otherwise stated. Machinery descriptions are intended as a guide only and their accuracy is not guaranteed. There are no warranties which extend beyond the description of the face hereof. Quotations subject to change without notice. It is the buyers and user’s responsibility to provide proper safety devices, training and equipment to safeguard the operator from harm for any particular use, operation or set up, and to adequately safeguard the machine, or machines, to conform to all Federal, State and Local Government Safety Standards and All Industry Safety Standards. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “energ_machinery” and is located in this country: US. This item can be shipped to United States.
- Setting Position: Horizontal/Vertical
- Brand: Yuasa
HV4 (110MM Diameter) Horizontal Vertical Rotary Table For Milling Machine Tool
HV4 (110MM Diameter) Horizontal Vertical Rotary Table For Milling Machine Tool. The data sheet of this product was originally written in English. Below is an automatic translation into English. HV4 (110MM diameter) horizontal vertical rotary table for milling machines. Table Diameter is 110mm & Horizontal Height: 80mm (3 -1/8). Worm gear ratio – 1:90, which means 1 turn of the handle should rotate the table 4 degrees. Center hole of the table MT2 table with 360 degree graduation. Handwheel graduated in seconds. 2 greasing points for direct lubrication of the table for longer life and better performance. Can be clamped in both horizontal and vertical position. Vernier scale calibrated to 10 second quick release system for manual indexing. Please note that some countries may have local import regulations restricting the import of certain products. Vernier scale calibrated to 10 second quick release system for manual indexing Please note that some countries may have local import regulations restricting the import of certain products. Tool Steel & Cast Iron. Country / Region of Manufacture. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tools4every1″ and is located in this country: IN. This item can be shipped to United States, all countries in Europe, all countries in continental Asia.
- Brand: Tools4every1
- Country and Region of Production: India
- Cross-Slide: No.
- Custom Bundle: No.
- Function: Manually
- Material: Tool Steel & Cast Iron
- Modified article: No.
- Product Type: Vertical milling machine
- Setting Position: Horizontal Vertical
- Tilting: No.
- Type of control: Manually
- Unit amount: 1
- Unit type: Unit
3 Inch Rotary Table 4 Slots With Vise 80mm Round Vice & Single Bolt Tailstock
3 ROTARY TABLE WITH 80mm ROUND VICE & SINGLE BOLT TAILSTOCK. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max) : 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″, Rotary Table 3″ Tilting, Rotary Table 4″, Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. DESCRIPTION FOR 80mm ROUND VICE. Vice Diameter of Base: 3 (80mm). Vice Jaw Width: 2-7/16 (62mm). Vice Jaw Depth: 3/4 (19mm). Vice Jaw Opening: 1-5/8 (27mm). Vice Height: 1-1/4 (31mm). Made of high grade close grained seasoned cast Iron. Fits our 3″ (80mm) & 4″ (100mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. These vices are counter- drilled in a manner that these can fit to a 3 as well 4 slot table. SUPPLIED WITH FIXING T-NUTS & BOLTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in this country: IN. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal / Vertical
- Tilting: No
- Rotary Table Height: 1-5/8\
- Packing: Hard Board Box
- Free shipping To: USA, UK, Italy, Spain, France, Mexico
- Table Scale Graduated: 5 Degree
- Single Bolt Tailstock Suitable For: Rotary Table 3\
- Tailstock Dead Center Height (Min – Max): 1-7/16\
- Rotary Table Dia.: 3-1/8\
- Rotary Table Slots: 4
- Operation: Manual
- Vice Diameter of Base: 3\
- Vice Jaw Width: 2-7/16\
- Vice Jaw Depth: 3/4\
- Vice Jaw Opening: 1-5/8\
- Vice Height: 1-1/4\
- Rotary Table Hand Wheel Calibrated To: 10 degree per revolution
- Brand: AUZAAR
Yuasa 12 Rotary Table (Inv. 44140)
Yuasa 12 Rotary Table Inv. Can be mounted horizontally or vertically. Nice shape some milling marks on table surface. Not What You Were Looking For? Where we keep a wide selection of Machine Tools, Tooling Components, Parts, Accessories, and More in stock for your convenience. Skidding/Crating of items are extra costs. All items are subject to prior sale. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “mikekandu” and is located in this country: US. This item can be shipped to United States.
- Brand: Yuasa
- MPN: 550-052
- Setting Position: Horizontal/Vertical
- Operation: Manual
Mini Rotary Table 100mm/ 4Horizontal And Vertical milling engineering Tool
4 Slots Horizontal And Vertical Regular Model Rotary Table 100 mm/ 4. 4 (100 mm) Small Mini Rotary Table-4 SLOTS. SIZE: 4″ INCH ROTARY TABLE DIAMETER 4″-100 MM. HORIZONTAL / VERTICAL CLAMPING. UNIT HORIZONTAL ONLY 53 mm. TABLE CALIBRATED 0-360 DEGREES. TABLE 36-1 RATIO, WHICH MEANS ONE TURN OF THE HANDLE ROTATE 10 DEGREE OF THE TABLE. ENABLE THE USER TO DRILL OR CUT ANY WORK AT AN EXACT INTERVAL AROUND A FIXED AXIS (GENERALLY VERTICAL OR HORIZONTAL). This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “pleasanttransaction243″ and is located in this country: IN. This item can be shipped worldwide.
- Brand: Unbranded
- Country/Region of Manufacture: India
- Cross-Slide: No
- Operation: Manual
- Setting Position: Horizontal/Vertical
- Slot: 4
- Table Graduated: 0-360 Degrees
- Thickness: 53 mm
- Tilting: No
- Unit Quantity: 1
- Unit Type: Unit
- Vertical Centre Height: 53 mm/ 2-1/16\