haas
Haas T5C4 4-Postion 5-Axis Rotary Trunnion




The T5C4 is a dual-axis tilting rotary unit with four 5C collet rotary spindles. Clamp your parts using standard 5C collets, or chuck them by threading 3-jaw chucks to the spindle noses. This unit has collet closing capability. T5C4 Sigma 5 – SN:904960. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “axialmedical” and is located in this country: US. This item can be shipped to United States.
- Brand: Haas
- Tilting: Yes
- Setting Position: Horizontal/Vertical
- MPN: T5C4
- Operation: CNC
- Country/Region of Manufacture: United States

Haas HRT-450 CNC Rotary Table






Haas HRT-450 CNC Rotary Table. 17.7 Table Diameter. 7.5 Hole Through Table. Equipped with cables, air line, T nuts and Haas oil. The table is skidded and we will load the truck. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “10114tools” and is located in this country: US. This item can be shipped to United States.
- Brand: Haas
- Tilting: No
- Cross-Slide: No
- MPN: HRT-450
- Setting Position: Horizontal/Vertical
- Operation: CNC
- Country/Region of Manufacture: United States
- Unit Quantity: 1

HAAS Control Box, BRUSHLESS, Haas Rotary Table, HRT 160, 210, 310 450, SIGMA CNC






HAAS AUTOMATION BRUSHLESS ROTARY CONTROL UNIT. 28 Pin, 120V, Silver Box, Programmable, Made in the USA. Lets you operate a Haas rotary on a non-Haas machine, or on a Haas machine without an optional axis drive. WILL RUN HA5C, HRT160 HRT210 HRT310 HRT450. When used with any CNC machining center, the control performs as a semi-4th axis, activated by a single M-code. You can program the control to rotate the rotary spindle in either direction, in step sizes from 0.001° to 999.999°. There can be up to 99 different steps in memory, and each step can be repeated (or looped) up to 999 times. Non-volatile memory retains programs, even when the power is turned off, and you can store up to 10 separate programs. Store up to 10 programs. Program up to 99 commands, and loop each command up to 999 times. 001 degree to 999.999 degrees. Operates on 110 VAC power. Allows Haas rotary products to be used on non-Haas machine tools. Does not include the CNC interface cable. Runs and sounds great, recently removed from a Haas VF-3 CNC Vertical Machining Center Mill. Midwest_Machinery_Inc ; IT’S IN OUR SHOP UNDERPOWER in FRANKSVILLE, WI NEAR. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “midwest_machinery_inc” and is located in this country: US. This item can be shipped to United States.
- Brand: Haas
- MPN: HRT, HA5C
- Setting Position: Horizontal/Vertical
- Operation: CNC
- Country/Region of Manufacture: United States

Haas Ha5c Rotary And Controller Brush







HAAS HA5C ROTARY AND CONTROLL BOX. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “aperitivi9″ and is located in this country: US. This item can be shipped to United States.
- Brand: Haas
- MPN: HA5C
- Operation: CNC
- Country/Region of Manufacture: United States

Haas Hrt-160 Rotary Worm Gear Assembly Haas Pt # 93-3182







HAAS HRT-160 Rotary Table WORM Gear-BEARING ASSEMBLY. ALL PARTS HAVE BEEN CHECKED AND MEET OR EXCEED HAAS SPEC FOR THIS PART AND APPLICATION. MAY NOT BE FOR SALE ONLY AS A DEALER PART. THIS IS FACTORY PRICE NEW. WORM GEAR/BRG ASSY HRT160. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “mtrman275″ and is located in this country: US. This item can be shipped to United States, New Zealand, Fiji, Papua New Guinea, Wallis and Futuna, Gambia, Malaysia, Taiwan, Poland, Oman, Suriname, United Arab Emirates, Kenya, Argentina, Guinea-Bissau, Armenia, Uzbekistan, Bhutan, Senegal, Togo, Ireland, Qatar, Burundi, Netherlands, Slovakia, Slovenia, Equatorial Guinea, Thailand, Aruba, Sweden, Iceland, Macedonia, Belgium, Israel, Liechtenstein, Kuwait, Benin, Algeria, Antigua and Barbuda, Swaziland, Italy, Tanzania, Pakistan, Burkina Faso, Panama, Singapore, Kyrgyzstan, Switzerland, Djibouti, Chile, China, Mali, Botswana, Republic of Croatia, Cambodia, Indonesia, Portugal, Tajikistan, Vietnam, Malta, Cayman Islands, Paraguay, Saint Helena, Cyprus, Seychelles, Rwanda, Bangladesh, Australia, Austria, Sri Lanka, Gabon Republic, Zimbabwe, Bulgaria, Czech Republic, Norway, Côte d’Ivoire (Ivory Coast), Kiribati, Turkmenistan, Grenada, Greece, Haiti, Greenland, Yemen, Afghanistan, Montenegro, Mongolia, Nepal, Bahamas, Bahrain, United Kingdom, Bosnia and Herzegovina, Hungary, Angola, Western Samoa, France, Mozambique, Namibia, Peru, Denmark, Guatemala, Solomon Islands, Vatican City State, Sierra Leone, Nauru, Anguilla, El Salvador, Dominican Republic, Cameroon, Guyana, Azerbaijan Republic, Macau, Georgia, Tonga, San Marino, Eritrea, Saint Kitts-Nevis, Morocco, Saint Vincent and the Grenadines, Mauritania, Belize, Philippines, Democratic Republic of the Congo, Republic of the Congo, Colombia, Spain, Estonia, Bermuda, Montserrat, Zambia, South Korea, Vanuatu, Ecuador, Albania, Ethiopia, Monaco, Niger, Laos, Ghana, Cape Verde Islands, Moldova, Madagascar, Saint Pierre and Miquelon, Lebanon, Liberia, Bolivia, Maldives, Gibraltar, Hong Kong, Central African Republic, Lesotho, Nigeria, Mauritius, Saint Lucia, Jordan, Guinea, Canada, Turks and Caicos Islands, Chad, Andorra, Romania, Costa Rica, India, Mexico, Serbia, Kazakhstan, Saudi Arabia, Japan, Lithuania, Trinidad and Tobago, Malawi, Nicaragua, Finland, Tunisia, Uganda, Luxembourg, Brazil, Turkey, Germany, Egypt, Latvia, Jamaica, South Africa, Brunei Darussalam, Honduras.
- Brand: Haas
- MPN: 93-3182
- Operation: CNC
- Setting Position: Horizontal/Vertical

Haas HRT160 17-pin 4th axis rotary table NOS






New old stock Haas HRT-160 4th axis rotary table. Brushed motor with 17-pin plug. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “cyclefab.llc” and is located in this country: US. This item can be shipped to United States.
- Brand: Haas
- Tilting: Yes
- MPN: HRT160
- Setting Position: Horizontal/Vertical
- Operation: CNC

Haas HRT160 Rotary Table 4th Axis WithRiser Block SIGMA 1 TYPE, BRUSHLESS MOTOR








Haas HRT160 Rotary Table 4th Axis W/Riser Block SIGMA 1 TYPE, BRUSHLESS MOTOR. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “stephras_39″ and is located in this country: US. This item can be shipped to United States.
- Brand: Haas
- Tilting: No
- Cross-Slide: No
- Setting Position: Horizontal/Vertical
- MPN: HRT160
- Operation: CNC

Haas HRT 11 Rotary Table





Haas HRT 11 with Trunnion Table with Mount and chip cover. Cable for direct connect to Haas 4th axis ready mill. Hooked it up and it turns as expected. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “koenigcnc” and is located in this country: US. This item can be shipped to United States.
- Tilting: No
- Setting Position: Horizontal/Vertical
- MPN: HRT11
- Operation: CNC
- Brand: Haas

Haas HRT-310 (circa 1999), 17 Pin, Brush Rotary, 4th Axis



Platter Diameter-12.2 in. Max Weight on Platter (w/support)-435 lbs. Max Weight on Platter (unsupported)-218 lbs. Includes cable with plugs for Mocon and air control connections. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “parlec” and is located in this country: US. This item can be shipped to United States.
- Brand: Haas
- Tilting: No
- Cross-Slide: No
- Setting Position: Horizontal/Vertical
- Operation: CNC

2019 HAAS HRT160 Rotary Table 4th-Axis Indexer Sigma 5






2019 HAAS HRT160 Rotary Table 4th-Axis Indexer Sigma 5. No issues, only 2 years of use. Comes with a custom made aluminum base (1.5 thickness) machined to fit perfectly on any HAAS table. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “perrucho2000″ and is located in this country: US. This item can be shipped to United States.
- Brand: Haas
- Tilting: No
- Cross-Slide: No
- Setting Position: Horizontal/Vertical
- MPN: HRT160
- Operation: CNC
