4_Inch_II_100_mm_HV_Rotary_Table_M6_Clamp_Kit_with_Vise_USA_Fulfilled_01_kry

4” Inch II 100 mm HV Rotary Table + M6 Clamp Kit with Vise (USA Fulfilled)

4'' Inch II 100 mm HV Rotary Table + M6 Clamp Kit with Vise (USA Fulfilled)
4'' Inch II 100 mm HV Rotary Table + M6 Clamp Kit with Vise (USA Fulfilled)
4'' Inch II 100 mm HV Rotary Table + M6 Clamp Kit with Vise (USA Fulfilled)

4'' Inch II 100 mm HV Rotary Table + M6 Clamp Kit with Vise (USA Fulfilled)
Description of 4 (100 mm) HV Rotary Table designed for Smaller Milling Machines Supplied Option of Round Vices & Fixing T nuts. Table diameter 100 mm table is graduated 360 degrees. Worm gear ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 degrees. Center height in vertical position: 2-1/16 (50 mm approx) (without Vice mounting). Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in horizontal & vertical position. Details of Round Vice: 80 mm round vice. Made of high grade close grain caste iron. Designed to fit our 3″ (75 mm) & 4″ (100 mm) rotary tables. The moving jaw has v-grooves to hold round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Diameter of base : 80 mm ; jaw width : 54 mm ; jaw depth: 20 mm; jaw opening : 32 mm ;height : 29 mm. Details of Round Vice: 100 mm Round Vice. Made of high grade close grain caste Iron. Designed to fit our 4 (100 mm) Rotary Tables. The moving jaw has V-grooves to hold Round objects. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Diameter of Base : 105 mm Jaw Width : 75 mm Jaw Depth: 21 mm Jaw Opening : 40 mm Height : 32 mm. Details of M6 Clamp Kit. M6 Clamp kit -Suits to 3″ & 4″ Rotary Tables. This will fit both the Horizontal & Tilting model of our 3″ (75 mm) & 4″ (100 mm) Rotary – 4 Slots Table. This Set includes Following: 2 x step blocks 2 x tee bolts with flanges nut 2 x clamps Bolt length: 55 mm overall & Bolt Thread M6. Vices & Work Holding. Measuring Tools & Equipments. Jewellery & Watch Making&########x9. Do It Yourself (DIY Tools)&########x9. HSS Cutting & Finishing Tools. 4” Inch II 100 mm HV Rotary Table + M6 Clamp Kit w/ Vise (USA Fulfilled). You will be glad to know that our tools are being manufactured in our own production facility in New Delhi (India) and are being inspected to ensure that they meet the required International quality benchmark as well as the expectations of our customers. We hold the Inventory of our good sellers in the USA & UK to offer the quickest possible deliveries to our customers. Pls note:- 1/. It is important to note that after the pandemic, although the logistic services have been improved a lot. However, they are still to reach their original positions. We expect our customers to understand and support us in such issues which are unforeseen and not in our control. However, we take complete onus and responsibility of supplying you with a completely brand-new product without any manufacturing or transit damage. Though we packed our goods with utmost care and strong packaging material, since our products are heavy, there could be transit damage in a few cases. However, it has been seen that such issues are not always a problem and our customers could still use them. In the majority of the cases, we have experienced that we manage to resolve the issue amicably without any trouble. So a discussion is the best way of a desired resolution. SEE OUR OTHER ITEMS FOR SALE. 80 mm 4 Jaws Independent Dog chuck with Back Plate & T nuts – (USA FULFILLED). 3 Pieces Spring Caliper Set – Inside, Outside & Divider 6 inch (USA FULFILLED). KNURLING TOOL PIVOT HEAD DIAMOND METRIC PITCHES PATTERN 1/2 SQ. Assorts Ball Turning Attachment (Exclusive Feature of Bearing Base) ROUND BASE. Single wheel knurling tool holder with 5 spare HSS knurls (USA FULFIILED). 4 (100 MM) ROTARY TABLE WITH 65MM 3 JAWS & 70MM 4 JAWS WITH BACK PLATE & TNUTS. Automatic Center Punch with Replaceable Hardened Steel Tip tool (USA FULFILLED). T-HANDLE TAP WRENCH SET OF 3 PCS SOLID COLLET JAWS – (USA FULFILLED). Supreme die holder with chuck. Single Wheel Straight Linear Knurling Hand Tool 3/4″ x 3/4″ x 5 (USA FULFILLED). Clamp Type Lathe Knurling Tools II 3/8″ Sq x Long 5-3/4″ Inch Tail (USA FULFILL). 4 regular Rotary Table +70 mm 4 Jaw Chuck+ Back Plate+ Fixing USA FULFILLED. Floating Tailstock Die holder 2MT Shank-Imperial Dies – USA FULFILLED. Spring Loaded Clamp Type Knurling Tool 2″ Capacity 3/8″ Hand Tools USA FULFILLED. HV6-4 Slots Rotary Table & Steel Dividing Plates Set USA FULFILLED. SLITTING/SLOTTING SAW HOLDER WITH CIRCULAR SAW BLADE – USA Fulfilled. New Mini V-Clamp Adjustable Spring Type Knurling Tool. Lathe Tailstock Die Holder – Tapping Threading Reaming Drilling Tools (MT3). Assorts Lathe Tool Ball Turning Attachment Oval Base- Single Bit (USA FULFILLED). Spindle Live Revolving Center, Morse Taper MT4 with Interchangeable Tips. Listing and template services provided by inkFrog.
4'' Inch II 100 mm HV Rotary Table + M6 Clamp Kit with Vise (USA Fulfilled)
clamp, fulfilled, inch, rotary, table, vise
next page
80_mm_4_Jaw_Independent_Chuck_with_Back_Plate_Rotary_Table_USA_Fulfilled_01_kjw

80 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)

80 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
80 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
80 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
80 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)

80 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
(With 4/ 100 mm Rotary Table). Made of Caste Iron, Precision High Quality 4 /100 mm Regular Rotary Table designed for smaller milling machines. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Can be clamped vertically and horizontally both ways. Height when laid horizontally 2-5/16 Inches (58 mm) without the Chuck on it. When Chuck is mounted, the total height becomes 130 mm. Center Height in vertical position: 2-1/8 (53.5 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. Base Dimensions : 135 mm x 105 mm with 2 x U slots (9.5 mm). Body is painted and Rest all working surfaces are precision ground. The Dial and locking screws are plated and Handle has epoxy black finish for a rust free life. Smooth Jerk free easy rotation with negligible play. The top of the table is ground to eliminate any excess run out. It is mainly used to cut gear teeth accurately and equal spacing of the teeth of the gear. Also used for milling gears, splines, squares, cutting of flutes in reamers, drills and milling cutters, racks, grinders, etc. Supplied with 80 mm 3 jaw self centering chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 4/100 mm Rotary table. The Back plate is drilled with M6 size tapped holes for the chuck’s bolts to be screwed with the back plate and then provided with 2 counter drills to them clamp it with the Rotary table’s T slots. The Chuck body is made of high grain casting and the jaws are made of hardened tool steel for a long life. The chuck recess is 55 mm same as that of the back plate. The back plate has a 13.9 mm small spigot that helps it in centrally locate it in the center of the Rotary Table. (With 3/ 80 mm Tilting Rotary Table). Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3Inches) and is most popular light weight tilting rotary table for small and light duty milling operations. Designed to tilt between 0- 90 Degrees & can be locked at any working angle position. Total Height when laid flat is 2-7/16 (62 mm) without the Chuck on it. When Chuck is mounted, the total height becomes 135 mm. Center Height in vertical position: 2-17/32 (61.5 mm approx). Base Dimensions : 100 x 105 mm with 2 x Drills (8 mm diameter) at a PCD of 82 mm approx. Weight of the Rotary Table : 2.700 Kgs. Supplied with a suitable M6 clamp kit which is hardened and ground before the epoxy black finish for a rust free life. Supplied with 80 mm 3 jaw self centering chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 3 /80 mm Tilting Rotary table. (With 3/80 mm Rotary Table). Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3Inches) and is most popular light weight rotary table for small and light duty milling operations. Total Height when laid flat is 1-3/4 (44 mm) without the Chuck on it. When Chuck is mounted, the total height becomes 115 mm. Center Height in vertical position: 1-3/4 (45 mm approx) without the chuck. Can be clamped both Horizontally and Vertically. Rotary Table’s Base Dimensions : 110 x 85 mm with 2 x U slots (7.5 mm wide) each wall for Horizontal and Vertical clamping purpose. Supplied with 80 mm 3 jaw self centering chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 3 /80 mm Rotary table. (With 4/ 100 mm Tilting Rotary Table). Brand New High Quality 4 /100 mm Precision Tilting Rotary Table Features to tilts between 0- 90 Degrees & can be locked at any working position. Provided with oil nipple for oiling of inside body. Center Height in horizontal position when lay flat : 2-3/4 (70 mm approx) without the Chuck on it. When Chuck is mounted, the total height becomes 140 mm. Center Height in vertical position: 3 Inch approx (77 mm). Body & table are made of caste Iron. Rest of the parts are made of tool steel. Body is painted black. Knobs, dials and locking screws are all plated and Rest of the working surface are precisely ground. Rotary’s handle are knurled for firm gripping while rotating and epoxy black finish for a long rust free life. Base Dimensions : 142 x 128 mm. 2 Opposite counter drills of 9.5 mm diameter are located at a PCD of 102 mm approx for mounting. Supplied with 80 mm 3 jaw self centering chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 4 /100 mm Tilting Rotary table. (Only 80 MM 4 Jaw Chuck with Back Plate). Quality 80 mm Diameter 4 Jaw Independent Chuck. Body is made of Graded Casting. Jaws are of Alloy Tool Steel -Hardened and Ground. Supplied with a Tool Steel Back Plate having same recess as that of the chuck. The plate is threaded drilled in a manner that the chuck can be screwed to the Back Plate. The Back plate has been counter drilled to fit to our 3″/ 80mm & 4″/ 100 mm Rotary tables. The other side of the Back plate has a small spigot to fit /adjust into the center of the Rotary table for better accuracy and Fitting. Vices & Work Holding. Measuring Tools & Equipments. Jewellery & Watch Making&########x9. Do It Yourself (DIY Tools)&########x9. HSS Cutting & Finishing Tools. 80 mm 4 Jaw Self Centering Chuck with Back Plate Rotary Table (USA Fulfilled). You will be glad to know that our tools are being manufactured in our own production facility in New Delhi (India) and are being inspected to ensure that they meet the required International quality benchmark as well as the expectations of our customers. We hold the Inventory of our good sellers in the USA & UK to offer the quickest possible deliveries to our customers. Pls note:- 1/. It is important to note that after the pandemic, although the logistic services have been improved a lot. However, they are still to reach their original positions. We expect our customers to understand and support us in such issues which are unforeseen and not in our control. However, we take complete onus and responsibility of supplying you with a completely brand-new product without any manufacturing or transit damage. Though we packed our goods with utmost care and strong packaging material, since our products are heavy, there could be transit damage in a few cases. However, it has been seen that such issues are not always a problem and our customers could still use them. In the majority of the cases, we have experienced that we manage to resolve the issue amicably without any trouble. So a discussion is the best way of a desired resolution. SEE OUR OTHER ITEMS FOR SALE. 80 mm 4 Jaws Independent Dog chuck with Back Plate & T nuts – (USA FULFILLED). 3 Pieces Spring Caliper Set – Inside, Outside & Divider 6 inch (USA FULFILLED). KNURLING TOOL PIVOT HEAD DIAMOND METRIC PITCHES PATTERN 1/2 SQ. Assorts Ball Turning Attachment (Exclusive Feature of Bearing Base) ROUND BASE. Single wheel knurling tool holder with 5 spare HSS knurls (USA FULFIILED). 4 (100 MM) ROTARY TABLE WITH 65MM 3 JAWS & 70MM 4 JAWS WITH BACK PLATE & TNUTS. Automatic Center Punch with Replaceable Hardened Steel Tip tool (USA FULFILLED). T-HANDLE TAP WRENCH SET OF 3 PCS SOLID COLLET JAWS – (USA FULFILLED). Supreme die holder with chuck. Single Wheel Straight Linear Knurling Hand Tool 3/4″ x 3/4″ x 5 (USA FULFILLED). Clamp Type Lathe Knurling Tools II 3/8″ Sq x Long 5-3/4″ Inch Tail (USA FULFILL). 4 regular Rotary Table +70 mm 4 Jaw Chuck+ Back Plate+ Fixing USA FULFILLED. Floating Tailstock Die holder 2MT Shank-Imperial Dies – USA FULFILLED. Spring Loaded Clamp Type Knurling Tool 2″ Capacity 3/8″ Hand Tools USA FULFILLED. HV6-4 Slots Rotary Table & Steel Dividing Plates Set USA FULFILLED. SLITTING/SLOTTING SAW HOLDER WITH CIRCULAR SAW BLADE – USA Fulfilled. New Mini V-Clamp Adjustable Spring Type Knurling Tool. Lathe Tailstock Die Holder – Tapping Threading Reaming Drilling Tools (MT3). Assorts Lathe Tool Ball Turning Attachment Oval Base- Single Bit (USA FULFILLED). Spindle Live Revolving Center, Morse Taper MT4 with Interchangeable Tips. Listing and template services provided by inkFrog.
80 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
back, chuck, fulfilled, independent, plate, rotary, table
next page
70_mm_4_Jaw_Independent_Chuck_with_Back_Plate_Rotary_Table_USA_Fulfilled_01_uhao

70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)

70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)

70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
(With 4/ 100 mm Rotary Table). Made of Caste Iron, Precision High Quality 4 /100 mm Regular Rotary Table designed for smaller milling machines. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Can be clamped vertically and horizontally both ways. Height when laid horizontally 2-5/16 Inches (58 mm) without the Chuck on it. When Chuck is mounted, the total height becomes 130 mm. Center Height in vertical position: 2-1/8 (53.5 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. Base Dimensions : 135 mm x 105 mm with 2 x U slots (9.5 mm). Body is painted and Rest all working surfaces are precision ground. The Dial and locking screws are plated and Handle has epoxy black finish for a rust free life. Smooth Jerk free easy rotation with negligible play. The top of the table is ground to eliminate any excess run out. It is mainly used to cut gear teeth accurately and equal spacing of the teeth of the gear. Also used for milling gears, splines, squares, cutting of flutes in reamers, drills and milling cutters, racks, grinders, etc. Supplied with 70 MM 4 JAW INDEPENDENT chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 4/100 mm Rotary table. The Back plate is drilled with M6 size tapped holes for the chuck’s bolts to be screwed with the back plate and then provided with 2 counter drills to them clamp it with the Rotary table’s T slots. (With 3/ 80 mm Tilting Rotary Table). Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3Inches) and is most popular light weight tilting rotary table for small and light duty milling operations. Designed to tilt between 0- 90 Degrees & can be locked at any working angle position. Total Height when laid flat is 2-7/16 (62 mm) without the Chuck on it. When Chuck is mounted, the total height becomes 135 mm. Center Height in vertical position: 2-17/32 (61.5 mm approx). Base Dimensions : 100 x 105 mm with 2 x Drills (8 mm diameter) at a PCD of 82 mm approx. Weight of the Rotary Table : 2.700 Kgs. Supplied with a suitable M6 clamp kit which is hardened and ground before the epoxy black finish for a rust free life. Supplied with 80 mm 3 jaw self centering chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 3 /80 mm Tilting Rotary table. (With 3/80 mm Rotary Table). Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3Inches) and is most popular light weight rotary table for small and light duty milling operations. Total Height when laid flat is 1-3/4 (44 mm) without the Chuck on it. When Chuck is mounted, the total height becomes 115 mm. Center Height in vertical position: 1-3/4 (45 mm approx) without the chuck. Can be clamped both Horizontally and Vertically. Rotary Table’s Base Dimensions : 110 x 85 mm with 2 x U slots (7.5 mm wide) each wall for Horizontal and Vertical clamping purpose. Supplied with 80 mm 3 jaw self centering chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 3 /80 mm Rotary table. (With 4/ 100 mm Tilting Rotary Table). Brand New High Quality 4 /100 mm Precision Tilting Rotary Table Features to tilts between 0- 90 Degrees & can be locked at any working position. Provided with oil nipple for oiling of inside body. Center Height in horizontal position when lay flat : 2-3/4 (70 mm approx) without the Chuck on it. When Chuck is mounted, the total height becomes 140 mm. Center Height in vertical position: 3 Inch approx (77 mm). Body & table are made of caste Iron. Rest of the parts are made of tool steel. Body is painted black. Knobs, dials and locking screws are all plated and Rest of the working surface are precisely ground. Rotary’s handle are knurled for firm gripping while rotating and epoxy black finish for a long rust free life. Base Dimensions : 142 x 128 mm. 2 Opposite counter drills of 9.5 mm diameter are located at a PCD of 102 mm approx for mounting. Supplied with 80 mm 3 jaw self centering chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 4 /100 mm Tilting Rotary table. (Only 70 MM 4 Jaw Chuck with Back Plate). Brand New, High Precision- Superb Quality! 70 mm 4 Jaws Self Centering Chuck with Back Plate & Fixing- Suitable to Mount on 3″ (75 mm) & 4″ (100 mm) Rotary Table -4 Slots Tables. Designed to fit our 3 or 4 Rotary table 4 slots. The chuck mounting is standard Uni-mat Thread M14 x 1. Vices & Work Holding. Measuring Tools & Equipments. Jewellery & Watch Making&########x9. Do It Yourself (DIY Tools)&########x9. HSS Cutting & Finishing Tools. 70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled). You will be glad to know that our tools are being manufactured in our own production facility in New Delhi (India) and are being inspected to ensure that they meet the required International quality benchmark as well as the expectations of our customers. We hold the Inventory of our good sellers in the USA & UK to offer the quickest possible deliveries to our customers. Pls note:- 1/. It is important to note that after the pandemic, although the logistic services have been improved a lot. However, they are still to reach their original positions. We expect our customers to understand and support us in such issues which are unforeseen and not in our control. However, we take complete onus and responsibility of supplying you with a completely brand-new product without any manufacturing or transit damage. Though we packed our goods with utmost care and strong packaging material, since our products are heavy, there could be transit damage in a few cases. However, it has been seen that such issues are not always a problem and our customers could still use them. In the majority of the cases, we have experienced that we manage to resolve the issue amicably without any trouble. So a discussion is the best way of a desired resolution. SEE OUR OTHER ITEMS FOR SALE. 80 mm 4 Jaws Independent Dog chuck with Back Plate & T nuts – (USA FULFILLED). 3 Pieces Spring Caliper Set – Inside, Outside & Divider 6 inch (USA FULFILLED). KNURLING TOOL PIVOT HEAD DIAMOND METRIC PITCHES PATTERN 1/2 SQ. Assorts Ball Turning Attachment (Exclusive Feature of Bearing Base) ROUND BASE. Single wheel knurling tool holder with 5 spare HSS knurls (USA FULFIILED). 4 (100 MM) ROTARY TABLE WITH 65MM 3 JAWS & 70MM 4 JAWS WITH BACK PLATE & TNUTS. Automatic Center Punch with Replaceable Hardened Steel Tip tool (USA FULFILLED). T-HANDLE TAP WRENCH SET OF 3 PCS SOLID COLLET JAWS – (USA FULFILLED). Supreme die holder with chuck. Single Wheel Straight Linear Knurling Hand Tool 3/4″ x 3/4″ x 5 (USA FULFILLED). Clamp Type Lathe Knurling Tools II 3/8″ Sq x Long 5-3/4″ Inch Tail (USA FULFILL). 4 regular Rotary Table +70 mm 4 Jaw Chuck+ Back Plate+ Fixing USA FULFILLED. Floating Tailstock Die holder 2MT Shank-Imperial Dies – USA FULFILLED. Spring Loaded Clamp Type Knurling Tool 2″ Capacity 3/8″ Hand Tools USA FULFILLED. HV6-4 Slots Rotary Table & Steel Dividing Plates Set USA FULFILLED. SLITTING/SLOTTING SAW HOLDER WITH CIRCULAR SAW BLADE – USA Fulfilled. New Mini V-Clamp Adjustable Spring Type Knurling Tool. Lathe Tailstock Die Holder – Tapping Threading Reaming Drilling Tools (MT3). Assorts Lathe Tool Ball Turning Attachment Oval Base- Single Bit (USA FULFILLED). Spindle Live Revolving Center, Morse Taper MT4 with Interchangeable Tips. Listing and template services provided by inkFrog.
70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
back, chuck, fulfilled, independent, plate, rotary, table
next page
6_150_mm_Precision_HV6_Rotary_Table_with_M8_Clamp_Kit_USA_FULFILLED_01_rcy

6 (150 mm) Precision HV6 Rotary Table with M8 Clamp Kit- USA FULFILLED

6 (150 mm) Precision HV6 Rotary Table with M8 Clamp Kit- USA FULFILLED
6 (150 mm) Precision HV6 Rotary Table with M8 Clamp Kit- USA FULFILLED
6 (150 mm) Precision HV6 Rotary Table with M8 Clamp Kit- USA FULFILLED
6 (150 mm) Precision HV6 Rotary Table with M8 Clamp Kit- USA FULFILLED
6 (150 mm) Precision HV6 Rotary Table with M8 Clamp Kit- USA FULFILLED
6 (150 mm) Precision HV6 Rotary Table with M8 Clamp Kit- USA FULFILLED
6 (150 mm) Precision HV6 Rotary Table with M8 Clamp Kit- USA FULFILLED
6 (150 mm) Precision HV6 Rotary Table with M8 Clamp Kit- USA FULFILLED
6 (150 mm) Precision HV6 Rotary Table with M8 Clamp Kit- USA FULFILLED

6 (150 mm) Precision HV6 Rotary Table with M8 Clamp Kit- USA FULFILLED
HV6 ROTARY TABLE. M8 Clamp Kit Set (8mm) Suitable for HV4/HV6 Rotary table. M8 CLAMP KIT. Epoxy Black Finish for a Rust Free Life. We have this rotary table in 3 & 4 slot. Manufactured from High grade seasoned casting and powder coated wrinkled finish for smooth looks.
6 (150 mm) Precision HV6 Rotary Table with M8 Clamp Kit- USA FULFILLED
clamp, fulfilled, kit-, precision, rotary, table
next page
4_100_Rotary_Table_With_Suitable_M6_Clamp_Kit_65_mm_3Jaws_Chuck_USA_FULFILLED_01_vbiy

4/100 Rotary Table With Suitable M6 Clamp Kit & 65 mm 3Jaws Chuck-USA FULFILLED

4/100 Rotary Table With Suitable M6 Clamp Kit & 65 mm 3Jaws Chuck-USA FULFILLED
4/100 Rotary Table With Suitable M6 Clamp Kit & 65 mm 3Jaws Chuck-USA FULFILLED
4/100 Rotary Table With Suitable M6 Clamp Kit & 65 mm 3Jaws Chuck-USA FULFILLED
4/100 Rotary Table With Suitable M6 Clamp Kit & 65 mm 3Jaws Chuck-USA FULFILLED
4/100 Rotary Table With Suitable M6 Clamp Kit & 65 mm 3Jaws Chuck-USA FULFILLED

4/100 Rotary Table With Suitable M6 Clamp Kit & 65 mm 3Jaws Chuck-USA FULFILLED
MILLING INDEXING 4/100 ROTARY TABLE QUALITY PRECISION HORIZONTAL VERTICAL WITH SUITABLE M6 CLAMP KIT & SMALL CHUCK (WITH 65 MM 3 JAWS SELF CENTERING CHUCK). Tool Set of 4 Regular Rotary Table with a 65 mm 3 jaws Self Centering Chuck with Back Plate & fixings T nut Bolts & M6 clamp kit.
4/100 Rotary Table With Suitable M6 Clamp Kit & 65 mm 3Jaws Chuck-USA FULFILLED
3jaws, chuck-usa, clamp, fulfilled, rotary, suitable, table
next page
3_80_mm_Milling_Rotary_Table_With_70_mm_4_Jaw_Independent_Chuck_USA_Fulfilled_01_kuwh

3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled

3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled
3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled
3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled
3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled
3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled
3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled
3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled
3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled

3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled
A PERFECT MILLING COMBO FOR YOUR SMALL MILLING MACHINE NEEDS. 3/ 80 MM MILLING ROTARY TABLE WITH 70 MM 4 JAW INDEPENDENT CHUCK. THE ROTARY TABLE AND CHUCK ASSEMBLY CAN BE MOUNTED BOTH HORIZONTALLY & VERTICALLY.
3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled
chuck, fulfilled, independent, milling, rotary, table
next page
6_150_mm_Precision_HV6_4_Slots_Rotary_Table_with_M8_Clamp_Kit_USA_Fulfilled_01_dpj

6 (150 mm) Precision HV6-4 Slots Rotary Table with M8 Clamp Kit (USA Fulfilled)

6 (150 mm) Precision HV6-4 Slots Rotary Table with M8 Clamp Kit (USA Fulfilled)
6 (150 mm) Precision HV6-4 Slots Rotary Table with M8 Clamp Kit (USA Fulfilled)
6 (150 mm) Precision HV6-4 Slots Rotary Table with M8 Clamp Kit (USA Fulfilled)
6 (150 mm) Precision HV6-4 Slots Rotary Table with M8 Clamp Kit (USA Fulfilled)
6 (150 mm) Precision HV6-4 Slots Rotary Table with M8 Clamp Kit (USA Fulfilled)
6 (150 mm) Precision HV6-4 Slots Rotary Table with M8 Clamp Kit (USA Fulfilled)
6 (150 mm) Precision HV6-4 Slots Rotary Table with M8 Clamp Kit (USA Fulfilled)
6 (150 mm) Precision HV6-4 Slots Rotary Table with M8 Clamp Kit (USA Fulfilled)
6 (150 mm) Precision HV6-4 Slots Rotary Table with M8 Clamp Kit (USA Fulfilled)

6 (150 mm) Precision HV6-4 Slots Rotary Table with M8 Clamp Kit (USA Fulfilled)
Graduated 360 degree around its circumference Details of M8 Clamp Kit suitable for Above Rotary Table This will fit both the Horizontal & Tilting model of HV4 & HV6 Rotary Tables This Set includes Following.
6 (150 mm) Precision HV6-4 Slots Rotary Table with M8 Clamp Kit (USA Fulfilled)
clamp, fulfilled, hv6-4, precision, rotary, slots, table
next page
6Inch_150_mm_Horizontal_Vertical_HV6_Milling_Rotary_Table_USA_Fulfilled_01_ld

6Inch (150 mm) Horizontal Vertical HV6 Milling Rotary Table USA Fulfilled

6Inch (150 mm) Horizontal Vertical HV6 Milling Rotary Table USA Fulfilled
6Inch (150 mm) Horizontal Vertical HV6 Milling Rotary Table USA Fulfilled
6Inch (150 mm) Horizontal Vertical HV6 Milling Rotary Table USA Fulfilled
6Inch (150 mm) Horizontal Vertical HV6 Milling Rotary Table USA Fulfilled
6Inch (150 mm) Horizontal Vertical HV6 Milling Rotary Table USA Fulfilled
6Inch (150 mm) Horizontal Vertical HV6 Milling Rotary Table USA Fulfilled
6Inch (150 mm) Horizontal Vertical HV6 Milling Rotary Table USA Fulfilled

6Inch (150 mm) Horizontal Vertical HV6 Milling Rotary Table USA Fulfilled
80 mm from Base to Top surface of Chuck. Center Height in vertical position 105 mm. HV 4-110 mm horizontal vertical rotary table for milling machine. Boring Head 2 for Milling R8 Shank (7/16 UNF Drawbar)- USA FULFILELD.
6Inch (150 mm) Horizontal Vertical HV6 Milling Rotary Table USA Fulfilled
6inch, fulfilled, horizontal, milling, rotary, table, vertical
next page
Tilting_Rotary_Milling_Table_3_Inch_I_80_mm_USA_FULFILLED_01_dzhk

Tilting Rotary Milling Table 3 Inch I 80 mm (USA FULFILLED)

Tilting Rotary Milling Table 3 Inch I 80 mm (USA FULFILLED)
Tilting Rotary Milling Table 3 Inch I 80 mm (USA FULFILLED)
Tilting Rotary Milling Table 3 Inch I 80 mm (USA FULFILLED)
Tilting Rotary Milling Table 3 Inch I 80 mm (USA FULFILLED)
Tilting Rotary Milling Table 3 Inch I 80 mm (USA FULFILLED)
Tilting Rotary Milling Table 3 Inch I 80 mm (USA FULFILLED)
Tilting Rotary Milling Table 3 Inch I 80 mm (USA FULFILLED)
Tilting Rotary Milling Table 3 Inch I 80 mm (USA FULFILLED)
Tilting Rotary Milling Table 3 Inch I 80 mm (USA FULFILLED)
Tilting Rotary Milling Table 3 Inch I 80 mm (USA FULFILLED)
Tilting Rotary Milling Table 3 Inch I 80 mm (USA FULFILLED)
Tilting Rotary Milling Table 3 Inch I 80 mm (USA FULFILLED)
Tilting Rotary Milling Table 3 Inch I 80 mm (USA FULFILLED)

Tilting Rotary Milling Table 3 Inch I 80 mm (USA FULFILLED)
Suits our 3″ (80 mm) & 4″ (100 mm) Rotary Table. Weight of the Rotary Table : 2.700 Kgs. Hand wheel is graduated in divisions of 10 min & can be set to zero. Total Height when laid flat is 2-7/16 (62 mm).
Tilting Rotary Milling Table 3 Inch I 80 mm (USA FULFILLED)
fulfilled, inch, milling, rotary, table, tilting
next page
3_80_MM_Milling_Rotary_Table_With_70_MM_4_Jaw_Independent_Chuck_usa_Fulfilled_01_ycu

3/ 80 MM Milling Rotary Table With 70 MM 4 Jaw Independent Chuck-usa Fulfilled

3/ 80 MM Milling Rotary Table With 70 MM 4 Jaw Independent Chuck-usa Fulfilled
3/ 80 MM Milling Rotary Table With 70 MM 4 Jaw Independent Chuck-usa Fulfilled
3/ 80 MM Milling Rotary Table With 70 MM 4 Jaw Independent Chuck-usa Fulfilled
3/ 80 MM Milling Rotary Table With 70 MM 4 Jaw Independent Chuck-usa Fulfilled
3/ 80 MM Milling Rotary Table With 70 MM 4 Jaw Independent Chuck-usa Fulfilled
3/ 80 MM Milling Rotary Table With 70 MM 4 Jaw Independent Chuck-usa Fulfilled

3/ 80 MM Milling Rotary Table With 70 MM 4 Jaw Independent Chuck-usa Fulfilled
A PERFECT MILLING COMBO FOR YOUR SMALL MILLING MACHINE NEEDS. 3/ 80 MM MILLING ROTARY TABLE WITH 70 MM 4 JAW INDEPENDENT CHUCK. MILLING ROTARY TABLE WITH CHUCK. THE ROTARY TABLE AND CHUCK ASSEMBLY CAN BE MOUNTED BOTH HORIZONTALLY & VERTICALLY.
3/ 80 MM Milling Rotary Table With 70 MM 4 Jaw Independent Chuck-usa Fulfilled
chuck-usa, fulfilled, independent, milling, rotary, table
next page