65mm
Rotary Table 3 (80mm) Horizontal & Vertical + 65mm Lathe Chuck + Backplate
Supplied complete with a key as well as set of tee nuts and studs to secure it into place. Table Height: 1 5/8. Center Height in Vertical Position: 1. Operates in the Horizontal or Vertical position. Hand Wheel calibrated to 10 degrees per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. Quality 3 jaw self centering chuck 65mm Diameter. Contra rotating rapid jaw adjustment mechanism. Backplate is drilled and counterbored to fit a range of 3″ and 4″ rotary tables with 4 Slots. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. Milling :Milling curved profiles and angled faces relative to a centre line. Drilling or milling to polar co-ordinates and, when mounted vertically with a tailstock they can be used to machine shafts or spindles. The versatile units can also be used on drilling, boring or slotting machines permitting an even greater range of operations. Machining – To establish the initial work piece position simply loosen the zero Collar locking handle and rotate the zero collar anti-clockwise for about half A turn. The worm is now disconnected from the worm wheel drive, the table is Free to turn independently to the crank handle and the work piece may now be Accurately aligned. To re-engage simply turn the zero collar in the clockwise Direction and re-tighten the locking handle. Rotary table can be used for. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. Please do not file Item Not Received Case or Item Not as Described Case. Don’t get confused with Manufacturing date and expiry date. Date format used in India is DD / MM / YYYY. Expiry Date : 7 Month Later From the Manufacture Date / On Pack Manufacture Date is Mention. These charges are normally collected. Indian merchants are unable to. Price or mark international parcels as “gifts”. Indian and international government regulations prohibit such practices.
Rotary Table 3 75mm Horizontal And Vertical With 65mm 3 Jaw Chuck & Back Plate
Rotarytable 4Slot +65mm Self Centering.
3 inches (75mm) 4 slots Horizontal and Vertical (H/V) Rotary Table with 65mm
Brand New 3 inches (75mm) 4 slots Horizontal and Vertical (H/V) Rotary Table with 65mm 3 Jaws Self Centering Chuck with Back Plate and T-nuts for Milling Engineering Tools. A great combo of 3/80 mm Rotary table with 65 mm self centering chuck with back plates & Tnuts- A perfect milling combo for smaller mills. Quality Low Profile Rotary Table diameter 80 mm (3Inches). 3inches rotary Table: 1. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position without chuck: 2-5/8 (66 mm approx) 4. Hand wheel is graduated in divisions of 10 min & can be set to zero. 65mm 3 Jaws Self Centering Chuck: 1. 65 mm 3 Jaws Self Centering Chuck M14 x 1 mounting Thread 2. Back Plate also has M14 x 1 thread Spigot to mount the Chuck on it. Back Plate is drilled in a manner that it can be fitted ONLY to 4 Slot Rotary Table. Suitable T -nuts are also supplied. All our products are brand new and sealed. We take our reputation seriously.
Rotary Table Horizontal & Vertical 3/80 mm+ 3Jaw Selfcentering 65mm Lathe Chuck
Table Height: 1 5/8. Center Height in Vertical Position: 1. Operates in the Horizontal or Vertical position. Hand Wheel calibrated to 10 degrees per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. Supplied complete with a key as well as set of tee nuts and studs to secure it into place. Quality 3 jaw self centering chuck 65mm Diameter with 14x1mm Thread. Contra rotating rapid jaw adjustment mechanism. Backplate is drilled and counterbored to fit a range of 3″ and 4″ rotary tables with 4 Slots. The holiday season is the busiest shopping period of the year, don? Our catalog covers every festival including Thanksgiving, Black Friday, Cyber Monday, Christmas. Please do visit our store and get yourself a treat.
3” & 4 IN Tilting Rotary Table with 4-Jaws SelfCentering lathe Chuck 50 & 65MM
3″ & 4″ inch Tilting Rotary Table with 4-Jaws Self Centering Lathe Chuck 50 & 65mm, Back plate & Fixing T-nuts bolts. A great combo of Tilting Rotary table (3″in 75mm & 4″in 100mm) with 4 jaws self centering chuck (50 & 65mm) with back plates & T-nuts.
Rotary Table 4 100mm Horizontal And Vertical With 65mm 3 Jaw Chuck & Backplate
4 (100mm) Rotary Table + 3 Jaw. (65mm) Self Centering Chuck + Back Plate. Table graduated in 360 Degrees. The scale calibrated in 5 degree increment. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. 3 Jaw Self Centering Chuck (65mm) Dia. 65mm Self Centering Chuck 3 Jaw. Jaws are made of tool steel, hardened & ground. Body is made of graded cast iron. KIT INCLUDES : ROTARY TABLE + CHUCK + BACKPLATE + T-NUTS.
4 In Rotary Table & 3-jaw Selfcentering 65mm Chuck, Back Plate, Fixing Bolts
(H/V) 4 INCH (100MM) ROTARY TABLE WITH 3-JAW SELF CENTERING 65MM LATHE CHUCK & BACK PLATE + FIXING T-NUTS BOLTS. A great combo of Rotary table wit self centering chuck with back plates & T-nuts. Quality Low Profile Rotary Table. Chuck Body is High Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground.
Rotary Table 4 100mm Horizontal And Vertical With 65mm 3 Jaw Chuck & Backplate
Rotary Table Slots: 4. Rotary Table Height: 2-1/16 (52mm). Table graduated in 360 Degrees. The scale calibrated in 5 degree increment. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. 3 Jaw Self Centering Chuck (65mm) Dia. 65mm Self Centering Chuck 3 Jaw. Jaws are made of tool steel, hardened & ground. Body is made of graded cast iron. KIT INCLUDES : ROTARY TABLE + CHUCK + BACKPLATE + T-NUTS. Our product is manufactured by us, we do not compromise on quality, the quality is the best you can ever get, kindly refer to the photos. We ensure the product reaches you at the earliest.
Rotary Table 3 75mm Horizontal And Vertical With 65mm 3 Jaw Chuck & Backplate
Kindly check with us if your zip code isn’t a remote area location before ordering. 3 (75mm) Rotary Table + 3 Jaw. (65mm) Self Centering Chuck + Back Plate. 3(80mm) ROTARY MILLING TABLE. Rotary Table Slots : 3. Rotary Table Height : 1-3/4 (44mm). Can be used in both horizontal & vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. 3 Jaw Self Centering Chuck (65mm) Dia. 65mm Self Centering Chuck 3 Jaw. Jaws are made of tool steel, hardened & ground. Body is made of graded cast iron. KIT INCLUDES : ROTARY TABLE + CHUCK + BACKPLATE. PROUDLY MADE IN INDIA. Neu-Werkzeuge comprises of a dedicated and skilled team of engineers with an aim of providing you tools of highest Indian industrial standards. Situated at the industrial hub of India we specialize in providing complete tooling solutions. /DHL/Aramex/My Pacco or India Post with Tracking facility. We ensure the product reaches you at the earliest. We are looking forward to your positive reviews and to build a long term relationship. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “neu-werkzeuge2018″ and is located in this country: IN. This item can be shipped to United States.
- Brand: Neu-Werkzeuge
- Chuck Type: Reversible 3 Jaw Self Centering Chuck 65
- Chuck’s Back-Thread: M14x1
- Model: 3\
- Modified Item: No
- Rotary Table Dia: 3\
- Rotary Table Height: 1-3/4\
- Rotary Table Slots: 3
- Setting Position: Horizontal/Vertical
- Tilting: No
Rotary Table 4 100mm Horizontal And Vertical With 65mm 3 Jaw Chuck Backplate
Rotary Table 4 100mm Horizontal And Vertical With 65mm 3 Jaw Chuck Backplate. Table graduated in 360 Degrees. The scale calibrated in 5 degree increment. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. 3 Jaw Self Centering Chuck (65mm) Dia. 65mm Self Centering Chuck 3 Jaw. Jaws are made of tool steel, hardened & ground. Body is made of graded cast iron. KIT INCLUDES : ROTARY TABLE + CHUCK + BACKPLATE + T-NUTS. PROUDLY MADE IN INDIA. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “gurunanak_international” and is located in this country: IN. This item can be shipped worldwide.
- Rotary Table Dia:: 4\
- Operation: Manual
- Table Graduated: 360 Degrees
- Rotary Table Height:: 2-1/16\
- Chuck type:::: Reversible 3 Jaw Self Centering Chuck 65mm
- Brand: ACTOOLS
- Custom Bundle:: NO
- Rotary Table Slots:: 4
- Setting Position: Horizontal/Vertical
- PACKING:: Hard Board
- Country/Region of Manufacture: India
- Chuck’s Back-Thread:: M14x1
- UPC: 9019746888767