tailstock
Precision Quality 6/150 MM Rotary Table 3 Slot With Tailstock & M8 Clamping Kit
Precision Rotary Table 6/150mm. CLAMPING KIT SET M8. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. 4are Polished and Ground from all the Sides. Tailstock for Rotary Table 6. Its made of good Quality of Cast Iron. Height is adjustable from 80 mm to 110 mm. It is used on our HV4 & HV6 ROTARY TABLE. It is USED WHEN BETWEEN CENTRE WORK IS REQUIRED. THESE ARE ADJUSTABLE FOR DIFFERENT HEIGHTS & Having fine feed centre point and the centre tip is hardened and Ground. The item “PRECISION QUALITY 6/150 MM ROTARY TABLE 3 SLOT WITH TAILSTOCK & M8 CLAMPING KIT” is in sale since Thursday, April 8, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “zealindustries” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Tilting: No
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
3 Inch Rotary Table H/V 4 Milling Slots With Tailstock And Vice 80mm Round Vise
3 ROTARY TABLE WITH 80mm ROUND VICE & SINGLE BOLT TAILSTOCK. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max) : 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. DESCRIPTION FOR 80mm ROUND VICE. Vice Diameter of Base: 3 (80mm). Vice Jaw Width: 2-7/16 (62mm). Vice Jaw Depth: 3/4 (19mm). Vice Jaw Opening: 1-5/8 (27mm). Vice Height: 1-1/4 (31mm). Made of high grade close grained seasoned cast Iron. Fits our 3″ (80mm) & 4″ (100mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. These vices are counter- drilled in a manner that these can fit to a 3 as well 4 slot table. SUPPLIED WITH FIXING T-NUTS & BOLTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. The item “3 Inch Rotary Table H/V 4 Milling Slots With Tailstock And Vice 80mm Round Vise” is in sale since Saturday, May 29, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal / Vertical
- Tilting: No
- Rotary Table Height: 1-5/8″ (44mm)
- Packing: Hard Board Box
- Free shipping To: USA, UK, Italy, Spain, France, Mexico
- Table Scale Graduated: 5 Degree
- Single Bolt Tailstock Suitable For: Rotary Table 3″ & 4″
- Tailstock Dead Center Height (Min – Max): 1-7/16″ (37mm) – 3-5/8″ (92mm)
- Rotary Table Dia.: 3-1/8″ (80 mm)
- Rotary Table Slots: 4
- Operation: Manual
- MPN: Does Not Apply
- Vice Diameter of Base: 3″ (80mm)
- Vice Jaw Width: 2-7/16″ (62mm)
- Vice Jaw Depth: 3/4″ (19mm)
- Vice Jaw Opening: 1-5/8″ (27mm)
- Vice Height: 1-1/4″ (31mm)
- Rotary Table Hand Wheel Calibrated To: 10 degree per revolution
- Brand: AUZAAR
Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK
Chuck Diameter : 65mm Vertical center Height : 2-1/16 (Approx 51 mm) Hand Wheel can be set to Zero Hand Wheel Graduated in 10 Min Divisions Calibrated in 5 Min Increment around the rim 36:1 ratio Can be used both Vertical & Horizontal. This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is Required. These are adjustable for different hieghts & also having fine feed centre point and the centre tip is hardend and Ground. It is made up of good grade of cast iron. It is Very useful product to use. Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK. Rotary Table Horizontal & Vertical 4 / 100 mm with. 65 mm Lathe Chuck & Back plate for Milling Machine. Vertical center Height : 2-1/16 (Approx 51 mm). Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. Calibrated in 5 Min Increment around the rim. Can be used both Vertical & Horizontal. Improve up at to on mention perhaps raising. Way building not get formerly her peculiar. Up uncommonly prosperous sentiments simplicity acceptance to so. Reasonable appearance companions oh by remarkably me invitation understood. Pursuit elderly ask perhaps all. All packages are sealed and quality checked. REVOLVING LIVE CENTER MT2 THREADED M14 X 1 WITH 65 MM 3 JAW SELF-CENTERING CHUCK. 3 JAW 65 MM SELF CENTERING LATHE CHUCK & BACKPLATE FOR 3″ & 4″ ROTARY TABLES. ROTARY TABLE 3 (TILTING) 4SLOT WITH 24pcs CLAMPING KIT. 3 ROTARY TABLE 4 SLOT (TILTING) WITH 24pcs CLAMPING KIT. 3 ROTARY TABLE TILTING FROM 0 TO 90 DEGREE & SUPPLIED WITH24PC M6 CLAMPING KIT. HV4 ROTARY TABLE 3 SLOT+100MM 3 JAW SELF CENTERING CHUCK AND BACKPLATE. HV4 ROTARY TABLE (3 SLOT)+100MM 3 JAW SELF CENTERING CHUCK WITH BACKPLATE. HV4 ROTARY TABLE (3 SLOT) WITH 100MM 3 JAW SELF CENTERING CHUCK AND BACKPLATE. HV4 ROTARY TABLE (3 SLOT)+100MM 3 JAW SELF CENTERING CHUCK AND BACKPLATE. HV4 ROTARY TABLE (3 SLOT) WITH 100MM 3 JAW SELF CENTERING CHUCK & BACKPLATE. HV4 ROTARY TABLE (3 SLOT) +SELF CENTERING CHUCK 100MM 3 JAW AND BACKPLATE. ROTARY TABLE HV4 (3 SLOT)& 100MM 3 JAW SELF CENTERING CHUCK AND BACKPLATE. ROTARY TABLE 4 WITH 24pcs CLAMPING KIT. 4 ROTARY TABLE (4slot) WITH 24pcs CLAMPING KIT. HV4 ROTARY TABLE (4slot) WITH 24pcs CLAMPING KIT. ROTARY TABLE 4 (4slot) WITH 24pcs CLAMPING KIT. Track Page Views With. Auctiva’s FREE Counter. The item “Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK” is in sale since Wednesday, November 25, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Other CNC, Metalworking & Manufacturing”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- MPN: Does Not Apply
- Modified Item: No
- Brand: Unbranded
- Country/Region of Manufacture: India
- Custom Bundle: No
Rotary Table 4/100mm With 65mm Mini Scroll Lathe Chuck & Single Bolt Tailstock
Rotary Table Horizontal & Vertical 4 / 100 mm with. 65 mm Lathe Chuck & Back plate for Milling Machine. Vertical center Height : 2-1/16 (Approx 51 mm). Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. Calibrated in 5 Min Increment around the rim. Can be used both Vertical & Horizontal. SINGLE BOLT TAILSTOCK SUITABLE FOR ROTARY TABLE 3″ / 4″. This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. The item “ROTARY TABLE 4/100MM WITH 65MM MINI SCROLL LATHE CHUCK & SINGLE BOLT TAILSTOCK” is in sale since Thursday, March 4, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “expert.tools” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- Rotary Table Size: 4 in
- Table Height: 66 mm
- No. of Slot: 4
- Jaws: 3
- Chuck Size: 65 mm
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: RUTWIK ENGINEERS
HV6 Rotary Table, Steel Dividing Plates Set & Tailstock with Free Manual-Milling
Horizontal Vertical Rotary Table MT2 Bore. A set of Steel Dividing Plates for Indexing with all required Accessories. A suitable adjustable Tailstock for HV4/ HV6 Rotary Table. The item “HV6 Rotary Table, Steel Dividing Plates Set & Tailstock with Free Manual-Milling” is in sale since Friday, February 5, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tools-shop2020″ and is located in DELHI, DELHI. This item can be shipped worldwide.
- Tilting: No
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does not apply
- Bundle Description: no
- Operation: Manual
- Brand: Unbranded
- Cross-Slide: No
Rotary Table 3/ 75 mm with 70 mm Independent Chuck + Clamping kit & Tailstock
Rotary Table 3 with 70 mm Independent Chuck. Regular 80 mm horizontal/ vertical Rotary Table complete. Vertical centre height 44 mm, in 3 Slots & 4 Slots. One turn = 10 degrees. Table graduated 360 degrees, Nice smooth rotation. High quality 70 mm independent lathe chucks. Exceptionally high quality 4 jaw lathe chucks. These are Very well engineered throughout, made of good quality material. It is having a recess for back plate mounting. It comes with reversible jaws and a Chuck Key, These Jaws are Hardened and Ground to HRC 58-62. This Tail stock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “Rotary Table 3/ 75 mm with 70 mm Independent Chuck + Clamping kit & Tailstock” is in sale since Friday, November 20, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
Rotary Table 4 + 70 MM Independent Chuck + Tailstock + Clamping Kit
ROTARY TABLE 4 + 70 MM INDEPENDENT CHUCK + BACKPLATE. Our 4 (100 mm) Rotary Table is Designed for smaller milling machines. Table diameter 100 mm. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx). Hand wheel is graduated in divisions of 10min & can be set to zero. Can be mounted both in Horizontal & vertical position. A high Quality 4 Jaw Independent chuck, the body of chuck is made from SG Iron & Jaws are of Tool steel hardened & ground. Supplied with a mounting back plate & fixing tee nuts with screws. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The chuck mounting is Thread M14 x 1. This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is Required. These are adjustable for different hieghts & also having fine feed centre point and the centre tip is hardend and Ground. It is made up of good grade of cast iron. It is Very useful product to use. CLAMPING KIT M 6. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “ROTARY TABLE 4 + 70 MM INDEPENDENT CHUCK + TAILSTOCK + CLAMPING KIT” is in sale since Monday, November 9, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Unbranded
4 ROTARY TABLE 100MM SELF CENTERING 3JAW CHUCK with TAILSTOCK & CLAMPING KIT
Rotary Table 4 with 100 mm Self-Centering Chuck & Backplate. Our 4 (100 mm) Rotary Table is Designed for smaller milling machines. Table diameter 100 mm. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. 100 mm Self Centering Chuck & Backplate. A high Quality 100 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate & fixing tee nuts with screws. (though the picture is not showing the same). Designed to fit our 3 or 4 Rotary table with either 3 or 4 slots. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play. This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is Required. These are adjustable for different hieghts & also having fine feed centre point and the centre tip is hardend and Ground. It is made up of good grade of cast iron. It is Very useful product to use. CLAMPING KIT M 6. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “4 ROTARY TABLE 100MM SELF CENTERING 3JAW CHUCK with TAILSTOCK & CLAMPING KIT” is in sale since Wednesday, February 24, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
YUASA 553-311 Adjustable Height Tailstock For 12 & 14 H/V Rotary Table Milling
YUASA 553-311 Adjustable Height Tailstock For 12 & 14 H/V Rotary Table Milling. Be sure to view our other items for more great tooling finds. The item “YUASA 553-311 Adjustable Height Tailstock For 12 & 14 H/V Rotary Table Milling” is in sale since Monday, April 5, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “zwmcquig” and is located in Yorktown, Virginia. This item can be shipped to United States.
- Country/Region of Manufacture: Japan
- Setting Position: Horizontal/Vertical
- Tilting: Yes
- Operation: Manual
- MPN: 553-311
- Brand: Yuasa
Tsodakoma 20 CNC 4th Axis Rotary Table with Tailstock
Tsodakoma 20 CNC 4th Axis Rotary Table with Tailstock. Pratt Burnard 12 1/4 3 Jaw Chuck with a 4 hole. Weight 1360 lbs + skid or crate. I leave the worn out and repainted machinery for the other guys. The item “Tsodakoma 20 CNC 4th Axis Rotary Table with Tailstock” is in sale since Saturday, March 20, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “mark10312″ and is located in Farmingdale, New Jersey. This item can be shipped to United States.
- Setting Position: Horizontal/Vertical
- Operation: CNC
- MPN: RNCM-501
- Brand: Tsodakoma