Horizontal Vertical Rotary

VEVOR Vertical Horizontal Milling Machine Rotary Table 100MM 200MM Working Table

• April 30, 2023
• admin

VEVOR Vertical & Horizontal Milling Machine Rotary Table 100MM 200MM HV4 HV6 HV8 Working Table 360° for Indexing Drilling. Vertical & Horizontal Rotary Table. The vertical & horizontal rotary table, one of the main accessories of the milling machine, is a precision work positioning device. This machine is widely used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Vertical & Horizontal Position. Vertical & Horizontal Design. It can be mounted “flat, ” with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. Or, mounted the rotary table on its end (or mount it “flat” on a 90° angle plate) so that it rotates about a horizontal axis. In this configuration, a tail stock can also be used, thus holding the workpiece between centers. HT200 casting has excellent casting performance, shock absorption performance as well as high strength heat resistance. It ensures the superior performance of the machine and provides you a good sense of use. The dial is divided into 360 degrees in total. The minimum scale can be accurate to seconds. All of these help you handle more complex and more precise tasks. Spindle end is applied accuracy bearing. Can be assured to keep very steady under load cutting. It’s not difficult for you to adjust the rotary table milling machine. What you should do is to adjust the handle to the position where you want because the precise scale is marked on the dial. Except for the rotary machine table, we also offer you four locating blocks or wrench and screws. The center can be corrected quickly and accurately by the Key guide block. Widely used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Great for circular cutting work, boring, spotfacing, and similar work. 150MM / 6 Milling Rotary Table. Clamping table diameter: 150mm / 6. Number of grooves: 4. Width of grooves: 11mm / 0.43. Circular Accuracy: 0.04. The parallelism of the mounting surface: 0.04. Transmission of the worm gear: 90/1. Basic dimension horizontal: 180 x 170mm / 7 x 6.7. Basic dimension vertical: 205 x 80mm / 8 x 3.15. Height: 80mm / 3.15. Weight without packaging: 11.1kg / 24.47lb. Worktable with scale: 360 °. 40kg / 88.18lb. 20kg / 44.09lb. 1 x Vertical and Horizontal Rotary Working Table. 100MM / 4 Milling Rotary Table. Table Diameter: 4/100mm. Reduction Ratio: 1:36. Horizontal Height : 2.76/70mm. Net Weight: 33.07/15kg. 1 x Screw Set. 100MM / 4 Milling Rotary Table With Dividing Plates. T-slot Diameter: 1/2inch (12mm). Table Dimension: 4x3inch (100x80mm). Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. 1 x Rotary Table. 3 x Dividing Plates. 1 x A Set of Accessory. 200MM / 8 Milling Rotary Table 3-Slot. Table Diameter: 8/200mm. Horizontal Height : 4.13/105mm. Vertical Height : 1.57/40mm. 200MM / 8 Milling Rotary Table 4-Slot. Horizontal Height : 105 mm/4.13 inch. Vertical Height : 40 mm/1.57 inch. 2 x Positioning Keys. 2 x Mounting Screws. VERTICAL & HORIZONTAL POSITION. Our rotary table with four slots is 4” / 6” / 8” (100mm / 150mm / 200mm) in diameter, it can be used in horizontal and vertical positions, meeting two functions and also bringing you convenient as well as efficient milling experience. HT200 Casting is mainly used to cast parts subjected to pressure and vibration on mechanical equipment. Adopted it as the material, our rotary milling table is durable, shock-absorbing, and heat-resistant. The rotary table for milling machine can be graduated 360 Degrees. Resetting dial and handwheel can be graduated in seconds. The enclosed design prevents the penetration of dirt and chips. The dial of the rotary table for mill is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it possible to use it easily and conveniently. This mill rotary table is popular for its excellent performance, practical design, and high precision. They are widely used for circular cutting work, boring, spot facing, and similar work. Thank you shopping with us. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “at_storez” and is located in this country: US. This item can be shipped to United States.

• Machine Type: 100MM
• Brand: VEVOR
• Function: Drilling, Milling

100mm, 200mm, horizontal, machine, milling, rotary, table, vertical, vevor, working