dividing
Rotary Table 4 4-Slot Horizontal Vertical Dividing Plates for Milling Machine
VERTICAL & HORIZONTAL- Our rotary table for milling machine is 4/100mm with 4 slot can be used in both horizontal and vertical positions, meeting two functions and also bringing you convenient as well as efficient milling experience. REMARKABLE QUALITY- Cast iron mainly used to cast parts subjected to pressure and vibration on mechanical equipment, offering rotary table for milling durability, shock absorption and heat-resistantance. EXCELLENT PRECISION- The precision rotary table indexing plate can be graduated 360 Degrees. Resetting dial and hand wheel can be graduated in seconds. CONVENIENT TO ADJUST- The dial is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it possible to use it easily and conveniently. MULTIPLE APPLICATION- With a set of wrench and set of screws, the power milling machines are widely used in milling machine like index boring, milling, circle cutting, spot facing and boring hole and so on. Practical design can meet a variety of workshop work needs. Vertical & Horizontal Design. Both vertical and horizontal with two functions. Circle cutting, indexing drilling, milling and more complicated work are possible when the vertical position of the table is used together with the tail part. Milling table is of good casting performance like mill vise, shock absorption performance as well as high strength heat resistance. The dial is divided into 360 degrees in total. Clear scale is more convenient for you to operate it. Just adjust the handle to the position where you want as the precise scale is marked on the dial. Three dividing plate set(Plate’A’ – 15, 16, 17, 18, 19, 20 Plate’B’ – 21, 23, 27, 29, 31, 33 Plate’C’ – 37, 39, 41, 43, 47, 49). A set of wrench and screws are free for you with your installation. Rotary table milling machines are designed for milling, drilling, fixture boring and many common workshop applications. 4/100mm Rotary Table 4-Slot Rotary Table. The mill rotary table is one of the main accessories of milling machine. As a precision work positioning device, it is widely used for indexing drilling, milling, circumferential cutting, boring, etc. The rotary turn table for milling machine is made from casting with high quality, can work with a set of dividing plate. T-slot Diameter: 1/2inch 12mm. Table Dimension: 4x3inch (100x80mm). Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. 1 x Rotary Table. 3 x Dividing Plates. 1 x A Set of Accessory. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “Rotary Table 4 4-Slot Horizontal Vertical Dividing Plates for Milling Machine” is in sale since Sunday, January 19, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “love-happyshopping” and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.
- Brand: Vevor 1574648774853291
- MPN: KJLXC00101574648774
- Operation: Manual
- Setting Position: Horizontal/Vertical
- Centre Bore: MT-2
- T-slot Diameter: 1/2inch (12mm)
- Table Dimension: 4x3inch (100x80mm)
- Plate ‘A': 15, 16, 17, 18, 19, 20
- Plate ‘B': 21, 23, 27, 29, 31, 33
- Plate ‘C': 37, 39, 41, 43, 47, 49
- Package Content 1: 1 x Rotary Table
- Package Content 2: 3 x Dividing Plates
- Package Content 3: 1 x A Set of Accessory
Rotary Table 4 4-Slot with Tailstock + Dividing Plates + a 4 3 Jaw Lathe Chuck
VERTICAL & HORIZONTAL- Our rotary table for milling machine is 4/100mm with 4 slots can be used in both horizontal and vertical positions, meeting two functions and also bringing you convenient as well as efficient milling experience. REMARKABLE QUALITY- Cast iron mainly used to cast parts subjected to pressure and vibration on mechanical equipment, offering rotary table for milling durability, shock absorption and heat-resistantance. The dial is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it possible to use it easily and conveniently. The precision rotary table indexing plate can be graduated 360 Degrees. With a set of wrench and set of screws, indexing plate set, a quality tailstock and self-centering chuck, it will be more convenient for you to operate this rotary table. MULTIPLE APPLICATION- The power milling machines are widely used in milling machine like index boring, milling, circle cutting, spot facing and boring hole and so on. Practical design can meet a variety of workshop work needs. Vertical & Horizontal Design. Both vertical and horizontal with two functions. Circle cutting, indexing drilling, milling and more complicated work are possible when the vertical position of the table is used together with the tail part. Milling table is of good casting performance like mill vise, shock absorption performance as well as high strength heat resistance. Just adjust the handle to the position where you want as the precise scale is marked on the dial. The dial is divided into 360 degrees in total. Clear scale is more convenient for you to operate it. Quality Tailstock and Chuck. With adjustable height which ranges from. 3.8-5.2inch (42-90mm). And self-centering chuck (100mm), the quality tailstock will fit different size of rotary tables. Three dividing plate set(Plate’A’ – 15, 16, 17, 18, 19, 20 Plate’B’ – 21, 23, 27, 29, 31, 33 Plate’C’ – 37, 39, 41, 43, 47, 49). A set of wrench and screws are free for you with your installation. Rotary table milling machines are designed for milling, drilling, fixture boring and many common workshop applications. 4/100mm Rotary Table 4-Slot Rotary Table. The mill rotary table is one of the main accessories of milling machine. As a precision work positioning device, it is widely used for indexing drilling, milling, circumferential cutting, boring, etc. The rotary turn table for milling machine is made from casting with high quality, can work with a set of dividing plate and a tailstock. Table Dimension: 4inch (100mm). Tailstock Height Range: 3.8-5.2inch (42-90mm). Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. 37, 39, 41, 43, 47, 49. 1 x Rotary Table. 3 x Dividing Plates. 1 x A Set of Accessory. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “Rotary Table 4 4-Slot with Tailstock + Dividing Plates + a 4 3 Jaw Lathe Chuck” is in sale since Monday, February 10, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “love-happyshopping” and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.
- Brand: Vevor 1574663130894951
- MPN: 7874A00101574663130
- Operation: Manual
- Setting Position: Horizontal/Vertical
- Centre Bore: MT-2
- Thread: M12*4
- Table Dimension: 4inch (100mm)
- Tailstock Height Range: 3.8-5.2inch (42-90mm)
- Plate ‘A': 15, 16, 17, 18, 19, 20
- Plate ‘B': 21, 23, 27, 29, 31, 33
- Plate ‘C': 37, 39, 41, 43, 47, 49
- Package Content 1: 1 x Rotary Table
- Package Content 2: 3 x Dividing Plates
- Package Content 3: 1 x Tailstock
- Package Content 4: 1 x Chuck
- Package Content 5: 1 x A Set of Accessory
Rotary Table 4 4-Slot with Tailstock + Dividing Plates + a 4 3 Jaw Lathe Chuck
VERTICAL & HORIZONTAL- Our rotary table for milling machine is 4/100mm with 4 slots can be used in both horizontal and vertical positions, meeting two functions and also bringing you convenient as well as efficient milling experience. REMARKABLE QUALITY- Cast iron mainly used to cast parts subjected to pressure and vibration on mechanical equipment, offering rotary table for milling durability, shock absorption and heat-resistantance. The dial is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it possible to use it easily and conveniently. The precision rotary table indexing plate can be graduated 360 Degrees. With a set of wrench and set of screws, indexing plate set, a quality tailstock and self-centering chuck, it will be more convenient for you to operate this rotary table. MULTIPLE APPLICATION- The power milling machines are widely used in milling machine like index boring, milling, circle cutting, spot facing and boring hole and so on. Practical design can meet a variety of workshop work needs. Vertical & Horizontal Design. Both vertical and horizontal with two functions. Circle cutting, indexing drilling, milling and more complicated work are possible when the vertical position of the table is used together with the tail part. Milling table is of good casting performance like mill vise, shock absorption performance as well as high strength heat resistance. Just adjust the handle to the position where you want as the precise scale is marked on the dial. The dial is divided into 360 degrees in total. Clear scale is more convenient for you to operate it. Quality Tailstock and Chuck. With adjustable height which ranges from. 3.8-5.2inch (42-90mm). And self-centering chuck (100mm), the quality tailstock will fit different size of rotary tables. Three dividing plate set(Plate’A’ – 15, 16, 17, 18, 19, 20 Plate’B’ – 21, 23, 27, 29, 31, 33 Plate’C’ – 37, 39, 41, 43, 47, 49). A set of wrench and screws are free for you with your installation. Rotary table milling machines are designed for milling, drilling, fixture boring and many common workshop applications. 4/100mm Rotary Table 4-Slot Rotary Table. The mill rotary table is one of the main accessories of milling machine. As a precision work positioning device, it is widely used for indexing drilling, milling, circumferential cutting, boring, etc. The rotary turn table for milling machine is made from casting with high quality, can work with a set of dividing plate and a tailstock. Table Dimension: 4inch (100mm). Tailstock Height Range: 3.8-5.2inch (42-90mm). Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. 37, 39, 41, 43, 47, 49. 1 x Rotary Table. 3 x Dividing Plates. 1 x A Set of Accessory. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “Rotary Table 4 4-Slot with Tailstock + Dividing Plates + a 4 3 Jaw Lathe Chuck” is in sale since Saturday, January 11, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “love-happyshopping” and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.
- Brand: Vevor 1574663130894951
- MPN: 7874A00101574663130
- Operation: Manual
- Setting Position: Horizontal/Vertical
- Centre Bore: MT-2
- Thread: M12*4
- Table Dimension: 4inch (100mm)
- Tailstock Height Range: 3.8-5.2inch (42-90mm)
- Plate ‘A': 15, 16, 17, 18, 19, 20
- Plate ‘B': 21, 23, 27, 29, 31, 33
- Plate ‘C': 37, 39, 41, 43, 47, 49
- Package Content 1: 1 x Rotary Table
- Package Content 2: 3 x Dividing Plates
- Package Content 3: 1 x Tailstock
- Package Content 4: 1 x Chuck
- Package Content 5: 1 x A Set of Accessory
4 Rotary Table + 3 Dividing Plates + 3-Jaw x 3-1/4 Self-Centering Chuck New
This is a new 4″ Rotary Table + 3 Dividing Plates + 3-Jaw x 3-1/4″ Self-Centering Chuck. Here are the rotary table details. Horizontal or vertical use. 1:72 ratio or 5° per revolution. Vernier scale reads to 10 seconds. Here are the Chuck Details. 3-Jaw x 3-1/4 scroll chuck. With T-slot mounting studs. With reverse jaw set. This brand new rotary table with dividing plates and 3-jaw chuck is ready to go right to work. Thanks for stopping by. The item “4 Rotary Table + 3 Dividing Plates + 3-Jaw x 3-1/4 Self-Centering Chuck New” is in sale since Wednesday, January 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “thirddevilsalvage” and is located in Jacksonville, Florida. This item can be shipped worldwide.
- Bundle Listing: Yes
- Model: 4″ Rotary table with dividing plates + 3-jaw chuck
- Country/Region of Manufacture: India
- Custom Bundle: Yes
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
- Bundle Description: 4″ Rotary Table 3 Dividing Plates 3-Jaw x 3-1/4″ Self-Centering Chuck
Rotary Table 4.5/16/110mm, 4jaw Chuck Self Centering with Back & Dividing Plate
Integrates of Rotary Kit. Rotary Table 4.5/16/110mm. 4 Jaw Chuck Self Centering with Back Plate 80mm. Weight of Kit :- 17 Kgs / 37.4 Lbs. Gear Ratio:- 90:1. Made of ductile cast iron and precision ground The worktable is graduated to a full 360° MT 2 center for holding work pieces worm gear ration is 90:1 making one turn of the handle move the table 4° vernier scale makes setting down to 10 secs possible quick release system for manual indexing. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular tool-path, on small milling machines. To cut straight lines &. Height can be varied while working with different index centers while the angle of inclination can be changed for various machining applications. The tip of center is finely rotatable. The dead center of the tail stock should be in line with the center of the rotary table. Tail stock suitable for 6″ & 4.5/16″ Rotary Table. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a. On a milling machine. Usually used to apply support to the longitudinal. Axis of a work-piece being machined. Is mounted in the tail stock, and inserted against the sides of a hole in the. A tail stock has a Dead. A Tail stock is particularly useful when the work-piece is relatively long and slender. 6.1/4 / 108mm. 3.3/16 / 80mm. The divisions of preset holes are provided for the most common angles such as 30, 45 and 90. The remaining divisions of the circle are provided for manually rotating the dividing arm using the plates. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws. There is a fixture plate on which the chuck is mounted. Term & Conditions. The color of item can be vary depend upon availability. The item “Rotary Table 4.5/16/110mm, 4jaw Chuck Self Centering with Back & Dividing Plate” is in sale since Monday, March 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- Weight of Kit: 17 Kgs / 37.4 Lbs
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Gear Ratio: 90:1
- MPN: Does Not Apply
- Brand: Unbranded
Rotary Table 6 3 Slot with Tail Stock & Dividing Plates for Milling Machine
VERTICAL & HORIZONTAL- Our rotary table for milling machine is 6/150mm with 3 slots can be used in both horizontal and vertical positions, meeting two functions and also bringing you convenient as well as efficient milling experience. REMARKABLE QUALITY- Cast iron mainly used to cast parts subjected to pressure and vibration on mechanical equipment, offering rotary table for milling durability, shock absorption and heat-resistantance. The dial is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it possible to use it easily and conveniently. The precision rotary table indexing plate can be graduated 360 Degrees. With a set of wrench and set of screws, indexing plate set and a quality tailstock, it will be more convenient for you to operate this rotary table. MULTIPLE APPLICATION- The power milling machines are widely used in milling machine like index boring, milling, circle cutting, spot facing and boring hole and so on. Practical design can meet a variety of workshop work needs. Vertical & Horizontal Design. Both vertical and horizontal with two functions. Circle cutting, indexing drilling, milling and more complicated work are possible when the vertical position of the table is used together with the tail part. Milling table is of good casting performance like mill vise, shock absorption performance as well as high strength heat resistance. Just adjust the handle to the position where you want as the precise scale is marked on the dial. The dial is divided into 360 degrees in total. Clear scale is more convenient for you to operate it. With adjustable height which ranges from 3.8-5.2inch (97-131mm), the quality tailstock will fit different size of rotary tables. Three dividing plate set(Plate’A’ – 15, 16, 17, 18, 19, 20 Plate’B’ – 21, 23, 27, 29, 31, 33 Plate’C’ – 37, 39, 41, 43, 47, 49). A set of wrench and screws are free for you with your installation. Rotary table milling machines are designed for milling, drilling, fixture boring and many common workshop applications. 6/150mm Rotary Table 3-Slot Rotary Table. The mill rotary table is one of the main accessories of milling machine. As a precision work positioning device, it is widely used for indexing drilling, milling, circumferential cutting, boring, etc. The rotary turn table for milling machine is made from casting with high quality, can work with a set of dividing plate and a tailstock. T-slot Diameter: 1/2inch 12mm. Table Dimension: 6inch (150mm). Tailstock Height Range: 1.7-3.5inch (97-131mm). Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. 37, 39, 41, 43, 47, 49. 1 x Rotary Table. 3 x Dividing Plates. 1 x A Set of Accessory. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “Rotary Table 6 3 Slot with Tail Stock & Dividing Plates for Milling Machine” is in sale since Wednesday, December 4, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “love-happyshopping” and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.
- Brand: Vevor 1574659272827521
- MPN: CXXZN00101574659272
- Operation: Manual
- Setting Position: Horizontal/Vertical
- Centre Bore: MT-2
- T-slot Diameter: 1/2inch (12mm)
- Table Dimension: 6inch (150mm)
- Tailstock Height Range: 1.7-3.5inch (97-131mm)
- Plate ‘A': 15, 16, 17, 18, 19, 20
- Plate ‘B': 21, 23, 27, 29, 31, 33
- Plate ‘C': 37, 39, 41, 43, 47, 49
- Package Content 1: 1 x Rotary Table
- Package Content 2: 3 x Dividing Plates
- Package Content 3: 1 x Tailstock
- Package Content 4: 1 x A Set of Accessory
Rotary Table 4 4-Slot with Tailstock + Dividing Plates + a 4 3 Jaw Lathe Chuck
VERTICAL & HORIZONTAL- Our rotary table for milling machine is 4/100mm with 4 slots can be used in both horizontal and vertical positions, meeting two functions and also bringing you convenient as well as efficient milling experience. REMARKABLE QUALITY- Cast iron mainly used to cast parts subjected to pressure and vibration on mechanical equipment, offering rotary table for milling durability, shock absorption and heat-resistantance. The dial is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it possible to use it easily and conveniently. The precision rotary table indexing plate can be graduated 360 Degrees. With a set of wrench and set of screws, indexing plate set, a quality tailstock and self-centering chuck, it will be more convenient for you to operate this rotary table. MULTIPLE APPLICATION- The power milling machines are widely used in milling machine like index boring, milling, circle cutting, spot facing and boring hole and so on. Practical design can meet a variety of workshop work needs. Vertical & Horizontal Design. Both vertical and horizontal with two functions. Circle cutting, indexing drilling, milling and more complicated work are possible when the vertical position of the table is used together with the tail part. Milling table is of good casting performance like mill vise, shock absorption performance as well as high strength heat resistance. Just adjust the handle to the position where you want as the precise scale is marked on the dial. The dial is divided into 360 degrees in total. Clear scale is more convenient for you to operate it. Quality Tailstock and Chuck. With adjustable height which ranges from. 3.8-5.2inch (42-90mm). And self-centering chuck (100mm), the quality tailstock will fit different size of rotary tables. Three dividing plate set(Plate’A’ – 15, 16, 17, 18, 19, 20 Plate’B’ – 21, 23, 27, 29, 31, 33 Plate’C’ – 37, 39, 41, 43, 47, 49). A set of wrench and screws are free for you with your installation. Rotary table milling machines are designed for milling, drilling, fixture boring and many common workshop applications. 4/100mm Rotary Table 4-Slot Rotary Table. The mill rotary table is one of the main accessories of milling machine. As a precision work positioning device, it is widely used for indexing drilling, milling, circumferential cutting, boring, etc. The rotary turn table for milling machine is made from casting with high quality, can work with a set of dividing plate and a tailstock. Table Dimension: 4inch (100mm). Tailstock Height Range: 3.8-5.2inch (42-90mm). Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. 37, 39, 41, 43, 47, 49. 1 x Rotary Table. 3 x Dividing Plates. 1 x A Set of Accessory. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “Rotary Table 4 4-Slot with Tailstock + Dividing Plates + a 4 3 Jaw Lathe Chuck” is in sale since Friday, December 27, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “love-happyshopping” and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.
- Brand: Vevor 1574663130894951
- MPN: 7874A00101574663130
- Operation: Manual
- Setting Position: Horizontal/Vertical
- Centre Bore: MT-2
- Thread: M12*4
- Table Dimension: 4inch (100mm)
- Tailstock Height Range: 3.8-5.2inch (42-90mm)
- Plate ‘A': 15, 16, 17, 18, 19, 20
- Plate ‘B': 21, 23, 27, 29, 31, 33
- Plate ‘C': 37, 39, 41, 43, 47, 49
- Package Content 1: 1 x Rotary Table
- Package Content 2: 3 x Dividing Plates
- Package Content 3: 1 x Tailstock
- Package Content 4: 1 x Chuck
- Package Content 5: 1 x A Set of Accessory
Rotary Table 8 /200 mm Dividing Plate Set Tail Stock 4 Jaw Chuck & Clamping kit
Integrates of Rotary Kit. Rotary Table 8/200 mm. 4 Jaw Chuck Self Centering with Back Plate 125mm. Weight of Kit :- 48 Kgs / 105.6 Lbs. Gear Ratio:-90:1. Made of ductile cast iron and precision ground The worktable is graduated to a full 360° MT 3 center for holding work pieces worm gear ration is 90:1 making one turn of the handle move the table 4° vernier scale makes setting down to 10 secs possible quick release system for manual indexing. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws. There is a fixture plate on which the chuck is mounted. Height can be varied while working with different index centers while the angle of inclination can be changed for various machining applications. The tip of center is finely rotatable. The dead center of the tail stock should be in line with the center of the rotary table. Tail stock suitable for 8″ /200mm” Rotary Table. 8 / 200mm. 4.3/4 / 120m m. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a rotary. On a milling machine. Usually used to apply support to the longitudinal Ro. Axis of a work-piece being machined. Center is mounted in the tail stock, and inserted against the sides of a hole in the center of the work-piece. A tail stock has a Dead center, while H. Ead Stock has Live center. A Tail stock is particularly useful when the work-piece is relatively long and slender. The divisions of preset holes are provided for the most common angles such as 30, 45 and 90. The remaining divisions of the circle are provided for manually rotating the dividing arm using the plates. The color of item can be vary depend upon availability. The item “Rotary Table 8 /200 mm Dividing Plate Set Tail Stock 4 Jaw Chuck & Clamping kit” is in sale since Friday, March 15, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Tilting: No
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Weight of Kit: 48 Kgs / 105.6 Lbs
- Gear Ratio: 90:1
- Centre Height Max: 8”/200mm
- Centre Height Min: 4.3/4” / 120mm
- Chuck Size: 125mm
- MPN: Does Not Apply
- Brand: Unbranded
Rotary Table 4 4-Slot Horizontal Vertical Dividing Plates for Milling Machine
VERTICAL & HORIZONTAL- Our rotary table for milling machine is 4/100mm with 4 slot can be used in both horizontal and vertical positions, meeting two functions and also bringing you convenient as well as efficient milling experience. REMARKABLE QUALITY- Cast iron mainly used to cast parts subjected to pressure and vibration on mechanical equipment, offering rotary table for milling durability, shock absorption and heat-resistantance. EXCELLENT PRECISION- The precision rotary table indexing plate can be graduated 360 Degrees. Resetting dial and hand wheel can be graduated in seconds. CONVENIENT TO ADJUST- The dial is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it possible to use it easily and conveniently. MULTIPLE APPLICATION- With a set of wrench and set of screws, the power milling machines are widely used in milling machine like index boring, milling, circle cutting, spot facing and boring hole and so on. Practical design can meet a variety of workshop work needs. Vertical & Horizontal Design. Both vertical and horizontal with two functions. Circle cutting, indexing drilling, milling and more complicated work are possible when the vertical position of the table is used together with the tail part. Milling table is of good casting performance like mill vise, shock absorption performance as well as high strength heat resistance. The dial is divided into 360 degrees in total. Clear scale is more convenient for you to operate it. Just adjust the handle to the position where you want as the precise scale is marked on the dial. Three dividing plate set(Plate’A’ – 15, 16, 17, 18, 19, 20 Plate’B’ – 21, 23, 27, 29, 31, 33 Plate’C’ – 37, 39, 41, 43, 47, 49). A set of wrench and screws are free for you with your installation. Rotary table milling machines are designed for milling, drilling, fixture boring and many common workshop applications. 4/100mm Rotary Table 4-Slot Rotary Table. The mill rotary table is one of the main accessories of milling machine. As a precision work positioning device, it is widely used for indexing drilling, milling, circumferential cutting, boring, etc. The rotary turn table for milling machine is made from casting with high quality, can work with a set of dividing plate. T-slot Diameter: 1/2inch 12mm. Table Dimension: 4x3inch (100x80mm). Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. 1 x Rotary Table. 3 x Dividing Plates. 1 x A Set of Accessory. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “Rotary Table 4 4-Slot Horizontal Vertical Dividing Plates for Milling Machine” is in sale since Friday, December 20, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “love-happyshopping” and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.
- Brand: Vevor 1574648774853291
- MPN: KJLXC00101574648774
- Operation: Manual
- Setting Position: Horizontal/Vertical
- Centre Bore: MT-2
- T-slot Diameter: 1/2inch (12mm)
- Table Dimension: 4x3inch (100x80mm)
- Plate ‘A': 15, 16, 17, 18, 19, 20
- Plate ‘B': 21, 23, 27, 29, 31, 33
- Plate ‘C': 37, 39, 41, 43, 47, 49
- Package Content 1: 1 x Rotary Table
- Package Content 2: 3 x Dividing Plates
- Package Content 3: 1 x A Set of Accessory