tailstock
Hv6 Rotary Table (4 Slot)horizontal & Verticalwith Double Bolt Tailstock
Precision Rotary Table 6 with Adjustable Tailstock. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80mm from Base to Top surface of Chuck. Graduated 360 degree around its circumference. Tailstock for Rotary Table 6. It is an adjustable height tailstock used when you need to support a long part held in the rotary table- such as cutting a spline on a shaft. Precision made of heavy cast iron, it has a base for mounting to the mill table with T- bolts. Manufactured from Seasoned Grade Casting. Adjustable to Center Heights from 85 – 110 mm. The item “HV6 ROTARY TABLE (4 SLOT)HORIZONTAL & VERTICALWITH DOUBLE BOLT TAILSTOCK” is in sale since Tuesday, November 24, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Other CNC, Metalworking & Manufacturing”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- MPN: Does Not Apply
- Brand: Unbranded
6 Rotary Table 3 Slot With Dividing Plate set, Tailstock & M8 Clamping Kit
Precision Rotary Table 6/150mm. With Dividing Plate Set, Tailstock & M8 Clamping Kit. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80mm from Base to Top surface of Chuck. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. It is an adjustable height tailstock used when you need to support a long part held in the rotary. Table- such as cutting a spline on a shaft. Precision made of heavy cast iron, it has a base for mounting to the mill table with T- bolts. Manufactured from Seasoned Grade Casting. Adjustable to Center Heights from 85 – 110 mm. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “6 Rotary Table 3 Slot With Dividing Plate set, Tailstock & M8 Clamping Kit” is in sale since Thursday, October 8, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
Rotary Table 4 Tilting + 100 MM Self Centering Chuck + Adjustable Tailstock
ROTARY TABLE 4 TILTING + 100 MM SELF CENTERING CHUCK + BACK PLATE. Hor/vert Rotary Table 4. Table height 66mm in flat position. Table graduated 360 degrees in 5 degree divisions. Base is 145mm x 126mm with two 10mm mounting holes separated by 110mm. The table tilts upto 90 degrees and can be used any were. A high Quality 100 mm 3 Jaw Self centering chuck body made from S G Iron & Jaws are of Tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate & fixing tee nuts with screws. (though the picture is not showing the same). Designed to fit our 3 or 4 Rotary table with either 3 or 4 slots. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play. Its made of good Quality of Cast Iron. Height is adjustable to 75 MM – 95 MM. It is used for our 4 Tilting Rotary Table. Having fine feed center point and the center tip is hardened and Ground. It is Very useful product to use. The item “ROTARY TABLE 4 TILTING + 100 MM SELF CENTERING CHUCK + ADJUSTABLE TAILSTOCK” is in sale since Wednesday, April 17, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “perfetto_pan” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set
With 100 mm Self Centering Chuck, Back plate. Tailstock for HV4 and HV6 & Indexing Plate Set. Rotary Table HV4 with 100 mm Self Centering Chuck & Back plate. Our Rotary Table HV4 is having a Table Diameter : 110 mm (4-3/8). Table Height: 80 mm (3 -1/8). Worm Gear Ratio – 1:90, which means that 1 handle rotation shall turn the table by 4 Degrees. Center Bore of the Table MT2. Table Graduated 360 Degrees. Hand wheel graduated in seconds. Vernier scale is calibrated to 10 seconds. 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. It is combined with a high Quality 80 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate, fixing tee nuts with screws, 100 mm Self Centering Chuck, Tailstock for HV4 and HV6, & Indexing Plate Set. Designed to fit our 3 or 4 Rotary table with either 3 or 4 slots. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play. Fit to our HV4 and HV6, Tilting Rotary Tables 100 mm. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. Tail stock for HV4 & HV6. Its made of good Quality of Cast Iron. Height is adjustable from 80 mm to 110 mm. It is used on our HV4 & HV6 ROTARY TABLE. It is USED WHEN BETWEEN CENTER WORK IS REQUIRED. THESE ARE ADJUSTABLE FOR DIFFERENT HEIGHTS & Having fine feed center point and the center tip is hardened and Ground. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set” is in sale since Monday, February 24, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “perfetto_pan” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Bundle Listing: Yes
- Non-Domestic Product: No
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded/Generic
HV6 ROTARY TABLE 3 Slot+ TAILSTOCK + INDEXING PLATES SET
HV6 ROTARY TABLE+ TAILSTOCK + INDEXING PLATES SET. Vertical centre height 105mm. One turn = 4 degrees. Table graduated 360 degrees. Vernier scale is calibrated to 10 sec. Supplied with Dividing Plate Set for Indexing & a Tailstock for a total Indexing solution. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. This Combination completes with TAILSTOCK, it is USED BETWEEN CENTRE to Center WORK IS REQUIRED. It is ADJUSTABLE FOR DIFFERENT HEIGHTS 80MM TO 110MM. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “HV6 ROTARY TABLE 3 Slot+ TAILSTOCK + INDEXING PLATES SET” is in sale since Wednesday, March 27, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “perfetto_pan” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
Rotary Table 6/hv6 With Double Bolt Tailstock, Indexing Plates And M8 Clap Se
Precision Rotary Table 6/150mm. With Dividing Plate Set, Tailstock & M8 Clamping Kit. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80mm from Base to Top surface of Chuck. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. It is an adjustable height tailstock used when you need to support a long part held in the rotary. Table- such as cutting a spline on a shaft. Precision made of heavy cast iron, it has a base for mounting to the mill table with T- bolts. Manufactured from Seasoned Grade Casting. Adjustable to Center Heights from 85 – 110 mm. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “ROTARY TABLE 6/HV6 WITH DOUBLE BOLT TAILSTOCK, INDEXING PLATES AND M8 CLAP SE” is in sale since Saturday, September 28, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “perfetto_pan” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Tilting: No
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Unbranded/Generic
Precision 6 Rotary Table With Indexing Plate Set, Tailstock & M8 Clamping Kit
Precision Rotary Table 6/150mm. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Graduated 360 degree around its circumference. CLAMPING KIT SET M8. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. Tailstock for Rotary Table 6. Its made of good Quality of Cast Iron. Height is adjustable from 80 mm to 110 mm. It is used on our HV4 & HV6 ROTARY TABLE. It is USED WHEN BETWEEN CENTRE WORK IS REQUIRED. THESE ARE ADJUSTABLE FOR DIFFERENT HEIGHTS & Having fine feed centre point and the centre tip is hardened and Ground. INDEXING PLATES SET FOR HV4 & HV6. Fit to our HV4 and HV6, Tilting Rotary Tables 100 mm. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. The item “PRECISION 6 ROTARY TABLE WITH INDEXING PLATE SET, TAILSTOCK & M8 CLAMPING KIT” is in sale since Tuesday, July 21, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “expert.tools” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- Table graduated: 360 degrees
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: RUTWIK ENGINEERS
Rotary Table 4/100mm With 50mm Mini Scroll Lathe Chuck & Single Bolt Tailstock
Rotary Table Horizontal & Vertical 4 / 100 mm with. 50 mm Lathe Chuck & Back plate for Milling Machine. Chuck Diameter : 50 mm. Vertical center Height : 2-1/16 (Approx 51 mm). Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. Calibrated in 5 Min Increment around the rim. Can be used both Vertical & Horizontal. SINGLE BOLT TAILSTOCK SUITABLE FOR ROTARY TABLE 3″ / 4″. This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. The item “ROTARY TABLE 4/100MM WITH 50MM MINI SCROLL LATHE CHUCK & SINGLE BOLT TAILSTOCK” is in sale since Friday, June 19, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “expert.tools” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- Rotary Table Size: 4 in
- Table Height: 66 mm
- No. of Slot: 4
- Jaws: 3
- Chuck Size: 50 mm
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: RUTWIK ENGINEERS
Hv6 Rotary Table (4 Slot) With Indexing Plate Set, Tailstock & M8 Clamping Kit
Precision Rotary Table 6/150 mm. With Dividing Plate Set, Tail stock & M 8 Clamping Kit. Manufactured from High grade seasons casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. T Slot 16 mm. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. Adjustable Height Tail stock. It is an adjustable height tail stock used when you need to support a long part held in the rotary. Table- such as cutting a spline on a shaft. Precision made of heavy cast iron, it has a base for mounting to the mill table with T- bolts. Manufactured from Seasoned Grade Casting. Adjustable to Center Heights from 85 – 110 mm. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “HV6 ROTARY TABLE (4 SLOT) WITH INDEXING PLATE SET, TAILSTOCK & M8 CLAMPING KIT” is in sale since Monday, October 5, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “proffesional_tools” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Tilting: No
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Country/Region of Manufacture: India
- Operation: Manual
- Brand: Unbranded
- Cross-Slide: No
New Rotary Table 6/150mm, 4jaw Indep. Chuck with Back & Dividing Plate Tailstock
Integrates of Rotary Kit. Rotary Table 6/150 mm. 2 4 Jaw Chuck Independent chuck with Back Plate 100mm. Weight of Kit :- 21 Kgs / 46.2 Lbs. Gear Ratio:- 90:1. Made of ductile cast iron and precision ground The worktable is graduated to a full 360° MT 2 centre for holding work pieces worm gear ration is 90:1 making one turn of the handle move the table 4° vernier scale makes setting down to 10 secs possible quick release system for manual indexing. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws and. Jaw can be moved independently. There is a fixture plate on which the chuck is mounted. These chucks ideal for gripping non-circular cross sections and gripping circular cross sections with extreme precision. Height can be varied while working with different index centres while the angle of inclination can be changed for various machining applications. The tip of centre is finely rotatable. The dead centre of the tail stock should be in line with the centre of the rotary table. Tail stock suitable for 6″ & 4.5/16″ Rotary Table. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a. On a milling machine. Usually used to apply support to the longitudinal. Axis of a work-piece being machined. Centre is mounted in the tail stock, and inserted against the sides of a hole in the centre of the work piece. A tail stock has a Dead. A Tail stock is particularly useful when the work-piece is relatively long and slender. 6.1/4 / 108mm. 3.3/16 / 80mm. The divisions of preset holes are provided for the most common angles such as 30, 45 and 90. The remaining divisions of the circle are provided for manually rotating the dividing arm using the plates. Term & Conditions. The colour of item can be vary depend upon availability. The item “New Rotary Table 6/150mm, 4jaw Indep. Chuck with Back & Dividing Plate Tailstock” is in sale since Monday, March 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Country/Region of Manufacture: India
- Operation: Manual
- Rotary Table: 6”/150mm
- Weight Of Kit: 21 Kgs / 46.2 Lbs
- Gear Ratio: 90:1
- Chuck Size: 100mm
- Brand: Unbranded