tailstock
Precision 6 Rotary Table With Indexing Plate Set, Tailstock & M8 Clamping Kit
Precision Rotary Table 6/150mm. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Graduated 360 degree around its circumference. CLAMPING KIT SET M8. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. Tailstock for Rotary Table 6. Its made of good Quality of Cast Iron. Height is adjustable from 80 mm to 110 mm. It is used on our HV4 & HV6 ROTARY TABLE. It is USED WHEN BETWEEN CENTRE WORK IS REQUIRED. THESE ARE ADJUSTABLE FOR DIFFERENT HEIGHTS & Having fine feed centre point and the centre tip is hardened and Ground. INDEXING PLATES SET FOR HV4 & HV6. Fit to our HV4 and HV6, Tilting Rotary Tables 100 mm. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. The item “PRECISION 6 ROTARY TABLE WITH INDEXING PLATE SET, TAILSTOCK & M8 CLAMPING KIT” is in sale since Friday, June 26, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “expert.tools” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- Table graduated: 360 degrees
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: RUTWIK ENGINEERS
Vertex, Horizontal and Vertical Rotary Table, Tailstock, TS-2, 1001-023
This tailstock is ideal to be used with these dividing heads and rotary tables: HV-8, BS-1, CC-6, CS-6. Adjustable height to adapt to every job, it can be adjusted from a height of 115 mm up to 145 mm. Quality construction, great finish and accuracy. Adjustable Height, Highest : 5.71 inches Adjustable Height, Lowest : 4.528 inches Gross Weight : 12.13 pound Measure : 0.4 CFT. The item “Vertex, Horizontal and Vertical Rotary Table, Tailstock, TS-2, 1001-023″ is in sale since Thursday, April 30, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “powertool4less” and is located in Miami, Florida. This item can be shipped worldwide.
- Adjustable Highest: 145 mm(5 45/64in)
- To be used with: Vertex Dividign Heads and Rotary Tables
- Measure CFT: 0.4 cft
- Country/Region of Manufacture: Taiwan
- MPN: 1001-023
- Brand: VERTEX
- Model: TS-2
- Adjustable Lowest: 115 mm(4 33/64in)
Hv6/150mm Rotary Table Horizontal & Vertical With Double Bolt Tailstock
Precision Rotary Table 6 with Adjustable Tailstock. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. T Slot 16 mm. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Graduated 360 degree around its circumference. Tailstock for Rotary Table 6. It is an adjustable height tailstock used when you need to support a long part held in the rotary table- such as cutting a spline on a shaft. Precision made of heavy cast iron, it has a base for mounting to the mill table with T- bolts. Manufactured from Seasoned Grade Casting. Adjustable to Center Heights from 85 – 110 mm. The item “HV6/150MM ROTARY TABLE HORIZONTAL & VERTICAL WITH DOUBLE BOLT TAILSTOCK” is in sale since Tuesday, June 16, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolsforexperts” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- MPN: Does Not Apply
- Brand: Rutwik Engineers
Rotary table 6 Horizontal & Vertical 3 Slot with Tailstock & M8 Clamping Kit
Precision Rotary Table 6 3 Slot. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80mm from Base to Top surface of Chuck. Graduated 360 degree around its circumference. Tailstock for Rotary Table 6. It is an adjustable height tailstock used when you need to support a long part held in the rotary table- such as cutting a spline on a shaft. Precision made of heavy cast iron, it has a base for mounting to the mill table with T- bolts. Manufactured from Seasoned Grade Casting. Adjustable to Center Heights from 85 – 110 mm. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “Rotary table 6 Horizontal & Vertical 3 Slot with Tailstock & M8 Clamping Kit” is in sale since Wednesday, April 17, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “zapactools” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Bundle Listing: Yes
- Non-Domestic Product: No
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- MPN: Does Not Apply
- Brand: Unbranded/Generic
Hv6 Rotary Table (4 Slot)horizontal & Vertical With Double Bolt Tailstock
Precision Rotary Table 6 with Adjustable Tailstock. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80mm from Base to Top surface of Chuck. Graduated 360 degree around its circumference. Tailstock for Rotary Table 6. It is an adjustable height tailstock used when you need to support a long part held in the rotary table- such as cutting a spline on a shaft. Precision made of heavy cast iron, it has a base for mounting to the mill table with T- bolts. Manufactured from Seasoned Grade Casting. Adjustable to Center Heights from 85 – 110 mm. The item “HV6 ROTARY TABLE (4 SLOT)HORIZONTAL & VERTICAL WITH DOUBLE BOLT TAILSTOCK” is in sale since Friday, March 20, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “zealfortoolsc3″ and is located in DELHI, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- MPN: Does Not Apply
- Brand: Unbranded
Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK
Rotary Table Horizontal & Vertical 4 / 100 mm with. 65 mm Lathe Chuck & Back plate for Milling Machine. Vertical center Height : 2-1/16 (Approx 51 mm). Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. Calibrated in 5 Min Increment around the rim. Can be used both Vertical & Horizontal. This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is Required. These are adjustable for different hieghts & also having fine feed centre point and the centre tip is hardend and Ground. It is made up of good grade of cast iron. It is Very useful product to use. The item “Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK” is in sale since Wednesday, April 17, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “zapactools” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Bundle Listing: Yes
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- MPN: Does Not Apply
- Brand: Unbranded/Generic
Precision 6 Rotary Table With Indexing Plate Set, Tailstock & M8 Clamping Kit
Precision Rotary Table 6/150mm. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Graduated 360 degree around its circumference. CLAMPING KIT SET M8. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. Tailstock for Rotary Table 6. Its made of good Quality of Cast Iron. Height is adjustable from 80 mm to 110 mm. It is used on our HV4 & HV6 ROTARY TABLE. It is USED WHEN BETWEEN CENTRE WORK IS REQUIRED. THESE ARE ADJUSTABLE FOR DIFFERENT HEIGHTS & Having fine feed centre point. And the centre tip is hardened and Ground. INDEXING PLATES SET FOR HV4 & HV6. Fit to our HV4 and HV6, Tilting Rotary Tables 100 mm. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. The item “PRECISION 6 ROTARY TABLE WITH INDEXING PLATE SET, TAILSTOCK & M8 CLAMPING KIT” is in sale since Tuesday, July 21, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolsforexperts” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Brand: Unbranded
Rotary Table 6/150mm (4slot) Horizontal & Vertical With Adjustable Tailstock
Precision Rotary Table 6 with Adjustable Tailstock. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. T Slot 16 mm. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Graduated 360 degree around its circumference. Tailstock for Rotary Table 6. It is an adjustable height tailstock used when you need to support a long part held in the rotary table- such as cutting a spline on a shaft. Precision made of heavy cast iron, it has a base for mounting to the mill table with T- bolts. Manufactured from Seasoned Grade Casting. Adjustable to Center Heights from 85 – 110 mm. The item “ROTARY TABLE 6/150MM (4SLOT) HORIZONTAL & VERTICAL WITH ADJUSTABLE TAILSTOCK” is in sale since Sunday, June 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “zealfortools” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Bundle Listing: No
- Colour: Black Wrinkle
- ROTARY TABLE, LATHE CHUCK: ROTARY TABLE, LATHE CHUCK
- Country/Region of Manufacture: India
- MPN: Does Not Apply
- Brand: SARAL TOOLS
- Country//Region of Manufacture: India
- Model: Precision Rotary Table 6″
Lathe Tailstock For Rotary Table With Indexing Plates For HV4 And HV6 Rotary Tab
The Set is Suitable for Rotary Table HV4 & HV6. HOLE PLATE A: 15, 16, 17, 18, 19, 20. HOLE PLATE B :21, 23, 27, 29, 31, 33. HOLE PLATE C: 37, 39, 41, 43, 47, 49. Set of 3 Plates. Made up of good Quality Cast Iron. Adjustable Height from 80 mm to 110 mm. It is used on our HV4 & HV6 ROTARY TABLE. It is used when between center work is required. These are adjustable for different heights and having fine. The item “Lathe Tailstock For Rotary Table With Indexing Plates For HV4 And HV6 Rotary Tab” is in sale since Saturday, February 15, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “machinetoolsindia” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Adjustable for: Different heights and having fine.
- Tailstock for Rotary Table: HV4 and HV6
- Adjustable Height from: 80 mm to 110 mm
- HOLE PLATE A: 15, 16, 17, 18, 19, 20
- HOLE PLATE B: 21, 23, 27, 29, 31, 33
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- HOLE PLATE C: 37, 39, 41, 43, 47, 49
- Set is Suitable for: Rotary Table HV4 & HV6
- No. of Plates: 3
- Made up of: Good Quality Cast Iron
- Operation: Manual
- MPN: TSFRTAWIP-2
- Brand: European Machinery
Hv6/150mm Rotary Table Horizontal & Vertical With Double Bolt Tailstock
Precision Rotary Table 6/150mm. With Dividing Plate Set. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. T Slot 16 mm. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. The item “HV6/150MM ROTARY TABLE HORIZONTAL & VERTICAL WITH DOUBLE BOLT TAILSTOCK” is in sale since Thursday, July 2, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolsforexperts” and is located in Delhi. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- MPN: Does Not Apply
- Brand: Unbranded