Month: March 2023
Diameter 200mm Milling Machine Horizontal Vertical Rotary Table High Precision
HV8 diameter 200mm vertical and horizontal dual purpose milling machine horizontal vertical rotary table high precision. HV series horizontal-vertical indexing plate (vertical-horizontal rotary table) is one of the main accessories of the milling machine, which can be used for indexing drilling or milling, circumferential cutting, boring, countersinking and other work on the milling machine. The worktable has a 360° scale line, a scale ring with a scale value of 1′ and a vernier ring with a minimum differentiation value of 10. The rotary table has a braking and indexing worm shedding mechanism. When the HV series vertical and horizontal turntable is in the vertical position, it can be used in conjunction with the tailstock (special order) to perform circular indexing drilling and milling of more complex workpieces. Made of high-strength FC30 cast iron. Suitable for milling machines or other special machines for cutting and cutting. The new spindle locking system, compared with the traditional bilateral platen type, has stronger locking and more stable cutting. It can be rotated 360 degrees, the handle is rotated 4 degrees, and the minimum scale is drawn for 10 seconds. Can be used in horizontal and vertical directions. Additional special accessories can be made: honeycomb plate and tailstock. Deceleration ratio 1:90. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “8famachinery” and is located in this country: CN. This item can be shipped worldwide.
- Brand: Unbranded
- Origin: Mainland China
- Certification: NONE
- CNC or Not: Normal
- Model Number: 8 inches
- Type: Rotary Table
3” 75 mm Horizontal & Vertical 4 Slots Rotary Table-Ship From USA
3” 75 mm Horizontal & Vertical 4 Slots Rotary Table. Low Profile Rotary Table diameter 80 mm (3Inches). Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position without chuck: 2-5/8 (66 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “stop2shopp” and is located in this country: US. This item can be shipped to United States.
- Brand: AD INTERNTAIONAL
- Tilting: No
- Custom Bundle: No
- Cross-Slide: Yes
- Setting Position: Horizontal/Vertical
- Operation: Manual
- Country/Region of Manufacture: India
- Modified Item: No
Tsudakoma 4th Axis 6 RZ-150R Rotary Indexer with TPC-Rz Controller Box
Tsudakoma 4th Axis 6 RZ-150R Rotary Indexer with TPC-Rz Controller Box. Used but works fine. Could use some TLC/ clean and grease. Uses 220v and Air. Currently has a 5C collet and chuck on it that will come with it. Can mount 3 or 4 jaw vices or other sized collets with attachments. For use inside a CNC or even manual mill. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “jarewardl_0″ and is located in this country: US. This item can be shipped to United States.
- Brand: tsudakoma
- MPN: 5C
- Setting Position: Horizontal/Vertical
- Operation: CNC
- Country/Region of Manufacture: Japan
4/ 100 Rotary Table With Suitable M6 Clamp Kit & Small Chuck USA Fulfilled
MILLING INDEXING 4/ 100 ROTARY TABLE QUALITY PRECISION HORIZONTAL VERTICAL WITH SUITABLE M6 CLAMP KIT & SMALL CHUCK. (WITH 65 MM 3 JAWS SELF CENTERING CHUCK). Quality Tool Set of 4 Regular Rotary Table with a 65 mm 3 jaws Self Centering Chuck with Back Plate & fixings T nut Bolts & M6 clamp kit. Chuck Body is High Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table. It can be mounted both in Horizontal & vertical position. Hand wheel is graduated in divisions of 10 min & can be set to zero. (WITH 70 MM 4 JAW INDEPENDENT CHUCK). Quality Tool Set of 4 Regular Rotary Table with a 70 mm 4 Jaws Independent Chuck with Back Plate & fixingsT nut Bolts & M6 clamp kit. Our company always wants our customer to be happy with our service and our products at best prices. We ensure the product reaches you at the earliest. Please be aware that some countries may have local import regulations which restrict certain products from being imported. Do not sign the receipt slip and kindly return the p. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “globaltools2016″ and is located in this country: US. This item can be shipped to United States.
- SIZE: WITH 65 MM 3 JAWS SELF CENTERING CHUCK
- Brand: ASSORTS
- Tilting: Yes
- Cross-Slide: Yes
- Setting Position: Horizontal/Vertical
- Material: Cast Iron
- Operation: CNC
- Country/Region of Manufacture: India
Automatic Self-Leveling 500m Red Beam 360 Rotary Laser Level Kit with Tripod Staff
Fully automatic waterproof red beam rotary laser level 500m range horizontal and vertical, waterproof. It can be widely used in architecture construction, building constructions, giant equipment installation, elevator installation, indoor decorating and so on. A pair of red laser goggles included, easily view the laser among the strong sunlight, super strong carry case with tenacious buffer material inside. 5 degree self levelling range. Rechargeable Battery and Charger. Electronic vials and positioning motors. All functions can be used with remote control. Controlled by temperature-stable sensors for auto alignment. Hours in continuous use. Diameter:500m(Using the laser detector). Laser Diode, wavelength: 635nm. DC 4.8-6V(4 section of NI-MH batteries or 4 section of NI-MH rechargeable batteries). 161(L)×161(W)×184(H)mm. When the instrument is upright, it can create a horizontal plan and a plumb line. When lay it down, the instrumetn can creates a vertical plan and horizontal line. 1x Strong Carrying Case. 1x Receiver & Handle. 1x Key of Carry Case. 5M length Staff and 1.65M Aluminum Tripod are ideal for auto levels, transits, construction laser level. Lightweight and durable aluminum construction with 5 telescoping sections. Backside rod scale for quick height measurements. The scales are in metric, quick clamp, Extendable from 104cm-165cm. And a strong carrying bag is included. Note:The unit of measurement for a ruler is cm. Quick Release Flat head. Ideal for auto levels, transits, construction lasers. The value Corrosion resistant. 5 meters length for most common applications. Tripod weight :3.6kg. Staff weight :1.6kg. Tripod core screw /M16:standard 5/8 X 11. Tripod Open and closed net:165cm/104cm. 1 X 1.65M Tripod. 1 X 5M Staff. 1 X Black carrying bag. PO BOX address is not acceptable. Please make sure the address is correct before purchasing. We have warehouses in the USA. If there is a problem with product quality, you can. E-mails are answered Monday through Saturday. Please allow up to 48 hours for a response to your message 3. This item is in the category “Business & Industrial\Test, Measurement & Inspection\Levels & Surveying Equipment\Levels & Autolevels\Rotary Lasers”. The seller is “industryfactory” and is located in this country: US. This item can be shipped to United States.
- Range: 500M Max
- Leveling Method: Electronic Auto-Leveling
- Beam Color: Red
- Product: Rotary Laser Level & Laser Detector/Receiver
- Brand: Yonntech
- Measuring Technology: Laser
- Leveling Accuracy: Horizontal:±20s Vertical:±20s
- Leveling Range: ±5°
- Slope-adjusting Range: ±5° (Bi-directional)
- Measuring Range: Diameter:500m(Using the laser detector)
- Down Point Diode: Accuracy:±1mm/1.5m
- Activity angle of remote control: Approximately 20m
- Water-proof: IP 54
- Spinning Speed: 0、60、120、300、600 r.p.m
- Directional-Scanning Angle: 0° 、10° 、45° 、90° 、180°
- Light Source: Red Laser Diode, wavelength: 635nm
- Working Temperature: -15℃-45℃
- Hours in continuous use: Approximately 6-8hours
- UPC: 723044290168
Rotary Table 3 Inch 80 mm 4 slot with 50 mm Mini Lathe Chuck for Milling Machine
Supplied complete with a key as well as set of tee nuts and studs to secure it into place. Table Height: 1 5/8. Center Height in Vertical Position: 1. Operates in the Horizontal or Vertical position. Hand Wheel calibrated to 10 degrees per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. Quality 3 jaw self centering chuck 50mm Diameter. Contra rotating rapid jaw adjustment mechanism. Backplate is drilled and counterbored to fit a range of 3″ and 4″ rotary tables with 4 Slots. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “workshoptools-2020″ and is located in this country: IN. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- chuck diameter: 50mm
- chuck type: 3 jaw reversable chuck
- Brand: TORRENS
New HV6 precision Horizontal & Vertical 3 slot Rotary Table USA Rahistools
6 precision Horizontal & Vertical 3 slot Rotary Table ISO9001 Part#TSL150 New. PRECISION 3 slot ROTARY TABLE /HORIZONTAL&VERTICAL – NEW. Graduated 360 degree around its circumference and driven by precision gear with 1:90 reduction ratio. One turn by handle moves table 4 degrees. DUAL POSITIVE ACTION LOCKS. 10 SECONDS VERNIER READING. GEAR DRIVE IMMERSED IN IOL. OPTIONAL DRIVING PLATES AND TAILSTOCK. PROUDLY MADE IN INDIA. ACTOOLS comprises of a dedicated and skilled team of engineers with an aim of providing you tools of highest indian industrial standards. Situated at the industrial hub of. We specialize in providing complete tooling solutions. Our Motto : Right Quality. We ensure the product reaches you at the earliest. We are looking forward to your positive reviews and to build a long term relationship. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “actools_123″ and is located in this country: IN. This item can be shipped worldwide.
- Brand: ACTOOLS
- Tilting: No
- Custom Bundle: No
- Cross-Slide: No
- Setting Position: Horizontal/Vertical
- Operation: Manual
- Country/Region of Manufacture: India
- Modified Item: No
- UPC: 9010491773889
WEISS TC 150T ELECTROMECHANICAL ROTARY INDEXING TABLE 4 POSITION with MOTOR TESTED
Drive Position: Below/Outside. Mounting Position: Standard. Recommended Equipment: approximately 800mm. Indexing Precision: Indexing 2-12: 60 arcsec (+/-30″); Indexing 16-24: 90arcsec (+/-45″). Axial run-out of the drive flange: (at 0 150mm) 0.01mm. Parallelism between the output flange and screw-on surface of the housing: (at 0 150mm) 0.03mm. Inside diameter of the rotary plate: 80mnm. Load Data (for the stationary central part). Permitted torque: 140 Nm. Permitted tilting moment: 200Nm. Permitted axial force: 3500N. Permitted radial force: 2500N. Load Data (for the output flange). Static torque: 150Nm. Permitted dynamic tilting moment: 500Nm. Permitted dynamic axial force: 5500N. Permitted dynamic radial force: 6000N. The following components are included in this sale. 1x Weiss TC 150T Rotary Indexing Table with Fischer Motor, as pictured. Cosmetic Notes: This assembly shows general signs of normal use including, scratches, & scuffs on the exterior. This is purely cosmetic, as pictured. Testing & Functional Notes: This assembly is TESTED & WORKING , as pictured. See above for any additional notes. Please visit OUR STORE to view more products & accessories! See Below For Terms & Conditions. Unless stated otherwise, accessories such as Power Cords, Probes, Software, Batteries, AC Adapters, and/or other Cables etc. 22 x 10 x 9, 53.50lbs. Germany I28 sku3746 av. Insured with Tracking (recommended). Uninsured, Untracked (not recommended, purchaser must assume all transport liability). Equipment is packed in a Tri-Wall Box or Strapped and Wrapped on a Pallet. Items may be picked up. Call to make arrangements. We Guarantee Item Condition As Stated Under “CONDITION” Above. ALL SALES ARE FINAL. Unless otherwise noted, the items advertised in this ad are offered “AS-IS, WHERE-IS”, with all faults, and may be Damaged, Used or may have Missing Parts and/or Accessories. WYSIWYG What you “See” is what you get. Please review the pictures & description very carefully! Accessories, Cables, Probes etc. Are NOT included unless specified in the advertisement. Please check your SPAM folder if you don’t see it. For items not made in the U. Purchasers must agree to all terms and policies found above. Until you have read & fully agree to the terms of this sale. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “plcsupply” and is located in this country: CA. This item can be shipped worldwide.
- Country/Region of Manufacture: Germany
- Setting Position: Horizontal/Vertical
- Tilting: No
- Operation: CNC
- MPN: TC 150T
- Brand: Weiss
3/75mm Tilting Horizontal Vertical Rotary Table 361 Angular Marking
Weight :- 2.30 Kg / 5.06 Lbs. Table Dia:- 3/ 75 MM. Tee Slot:- M 5. Gear Ratio :- 36:1. Rotary Table Tilting Type 3/75 mm has a gear ratio of 36:1 suitable for working horizontally and vertically. Can be set on an angle for holding precision jobs. Angular marking is very precise making working easy. Rotary Table Uses. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed usually horizontal. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. Term & Conditions. The colour of item can be vary depend upon availability. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in this country: IN. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: Yes
- Tee Slot: M 5
- Table Dia: 3\
- Gear Ration: 36:1
- Weight: 2.3 Kgs / 5.06 Lbs
- Height: 2.1/4\
- Operation: Manual
- Brand: Unbranded
Horizontal Vertical HV6 Rotary Table 150 mm -6 Inches (3 SLOTS) USA FULFILL
Horizontal Vertical HV6 Rotary Table (150 mm -6 Inches) for Milling Machine. Manufactured from High grade seasoned casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surfac. Gear Ratio 90:1 Center Bore MT-2 T Slot 16mm. Horizontal Height : Approx 80mm from Base to Top surface of Chuck Satin Chrome Dials Graduated 360 degree around its circumference. STAY AWAY FROM CHEAP COPIES. TAGGED SELLERS ARE NOT AUTHORISED TO SELL ASSORTS BRAND PRODUCTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “easytools” and is located in this country: US. This item can be shipped to United States.
- Brand: ad international
- Tilting: No
- Cross-Slide: No
- Setting Position: Horizontal/Vertical
- Operation: Manual
- Country/Region of Manufacture: India