500m_Self_leveling_Red_Laser_Level_360_Rotating_Rotary_withTripod_Staff_01_unp

500m Self-leveling Red Laser Level 360 Rotating Rotary withTripod Staff

500m Self-leveling Red Laser Level 360 Rotating Rotary withTripod Staff
500m Self-leveling Red Laser Level 360 Rotating Rotary withTripod Staff
500m Self-leveling Red Laser Level 360 Rotating Rotary withTripod Staff
500m Self-leveling Red Laser Level 360 Rotating Rotary withTripod Staff
500m Self-leveling Red Laser Level 360 Rotating Rotary withTripod Staff
500m Self-leveling Red Laser Level 360 Rotating Rotary withTripod Staff
500m Self-leveling Red Laser Level 360 Rotating Rotary withTripod Staff
500m Self-leveling Red Laser Level 360 Rotating Rotary withTripod Staff
500m Self-leveling Red Laser Level 360 Rotating Rotary withTripod Staff
500m Self-leveling Red Laser Level 360 Rotating Rotary withTripod Staff
500m Self-leveling Red Laser Level 360 Rotating Rotary withTripod Staff

500m Self-leveling Red Laser Level 360 Rotating Rotary withTripod Staff
Fully automatic waterproof red beam rotary laser level 500m range horizontal and vertical, waterproof. It can be widely used in architecture construction, building constructions, giant equipment installation, elevator installation, indoor decorating and so on. A pair of red laser goggles included, easily view the laser among the strong sunlight, super strong carry case with tenacious buffer material inside. 5 degree self levelling range. Rechargeable Battery and Charger. Electronic vials and positioning motors. All functions can be used with remote control. Controlled by temperature-stable sensors for auto alignment. Hours in continuous use. Diameter:500m(Using the laser detector). Laser Diode, wavelength: 635nm. DC 4.8-6V(4 section of NI-MH batteries or 4 section of NI-MH rechargeable batteries). 161(L)×161(W)×184(H)mm. When the instrument is upright, it can create a horizontal plan and a plumb line. When lay it down, the instrumetn can creates a vertical plan and horizontal line. 1x Strong Carrying Case. 1x Receiver & Handle. 1x Key of Carry Case. 5M length Staff and 1.65M Aluminum Tripod are ideal for auto levels, transits, construction laser level. Lightweight and durable aluminum construction with 5 telescoping sections. Backside rod scale for quick height measurements. The scales are in metric, quick clamp, Extendable from 104cm-165cm. And a strong carrying bag is included. Note:The unit of measurement for a ruler is cm. Quick Release Flat head. Ideal for auto levels, transits, construction lasers. The value Corrosion resistant. 5 meters length for most common applications. Tripod weight :3.6kg. Staff weight :1.6kg. Tripod core screw /M16:standard 5/8 X 11. Tripod Open and closed net:165cm/104cm. 1 X 1.65M Tripod. 1 X 5M Staff. 1 X Black carrying bag. PO BOX address is not acceptable. Please make sure the address is correct before purchasing. We have warehouses in the USA. If there is a problem with product quality, you can. E-mails are answered Monday through Saturday. Please allow up to 48 hours for a response to your message 3. This item is in the category “Business & Industrial\Test, Measurement & Inspection\Levels & Surveying Equipment\Levels & Autolevels\Rotary Lasers”. The seller is “ukdirectseller” and is located in this country: US. This item can be shipped to United States.
  • Range: 500M Max
  • Leveling Method: Electronic Auto-Leveling
  • Beam Color: Red
  • Product: Rotary Laser Level & Laser Detector/Receiver
  • Brand: Yonntech
  • Measuring Technology: Laser
  • Leveling Accuracy: Horizontal:±20s Vertical:±20s
  • Leveling Range: ±5°
  • Slope-adjusting Range: ±5° (Bi-directional)
  • Measuring Range: Diameter:500m(Using the laser detector)
  • Down Point Diode: Accuracy:±1mm/1.5m
  • Activity angle of remote control: Approximately 20m
  • Water-proof: IP 54
  • Spinning Speed: 0、60、120、300、600 r.p.m
  • Directional-Scanning Angle: 0° 、10° 、45° 、90° 、180°
  • Light Source: Red Laser Diode, wavelength: 635nm
  • Working Temperature: -15℃-45℃
  • Hours in continuous use: Approximately 6-8hours
  • UPC: 718174105024

500m Self-leveling Red Laser Level 360 Rotating Rotary withTripod Staff
500m, laser, level, rotary, rotating, self-leveling, staff, withtripod
previous page · next page
Haas_HRT_310_circa_1999_17_Pin_Brush_Rotary_4th_Axis_01_tjgo

Haas HRT-310 (circa 1999), 17 Pin, Brush Rotary, 4th Axis

Haas HRT-310 (circa 1999), 17 Pin, Brush Rotary, 4th Axis
Haas HRT-310 (circa 1999), 17 Pin, Brush Rotary, 4th Axis

Haas HRT-310 (circa 1999), 17 Pin, Brush Rotary, 4th Axis
Platter Diameter-12.2 in. Max Weight on Platter (w/support)-435 lbs. Max Weight on Platter (unsupported)-218 lbs. Includes cable with plugs for Mocon and air control connections. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “parlec” and is located in this country: US. This item can be shipped to United States.
  • Brand: Haas
  • Tilting: No
  • Cross-Slide: No
  • Setting Position: Horizontal/Vertical
  • Operation: CNC

Haas HRT-310 (circa 1999), 17 Pin, Brush Rotary, 4th Axis
axis, brush, circa, haas, hrt-310, rotary
previous page · next page
4_100mm_Horizontal_Vertical_Rotary_Table_4_slots_for_Milling_Machines_01_zj

4 (100mm) Horizontal-Vertical Rotary Table 4 slots for Milling Machines

4 (100mm) Horizontal-Vertical Rotary Table 4 slots for Milling Machines
4 (100mm) Horizontal-Vertical Rotary Table 4 slots for Milling Machines
4 (100mm) Horizontal-Vertical Rotary Table 4 slots for Milling Machines

4 (100mm) Horizontal-Vertical Rotary Table 4 slots for Milling Machines
4 (100mm) Horizontal-Vertical Rotary Table 4 slots for Milling Machines for Milling Machines. Brand New Very High Quality 4 /100 mm Regular Rotary Table designed for smaller milling machines. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Can be mounted both in Horizontal & vertical position. Can be used with Clamping kit -Vertical Height 55 mm when table kept horizontal. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolmeister2022″ and is located in this country: IN. This item can be shipped to North, South, or Latin America.
  • Country/Region of Manufacture: United States
  • Setting Position: Horizontal/Vertical
  • Tilting: No
  • Operation: Manual
  • Brand: Praztech

4 (100mm) Horizontal-Vertical Rotary Table 4 slots for Milling Machines
100mm, horizontal-vertical, machines, milling, rotary, slots, table
previous page · next page
3_80_Regular_Rotary_Table_Small_Chuck_Back_Plate_T_Nuts_usa_Fulfilled_01_agy

3/ 80 Regular Rotary Table & Small Chuck, Back Plate, T Nuts (usa Fulfilled)

3/ 80 Regular Rotary Table & Small Chuck, Back Plate, T Nuts (usa Fulfilled)
3/ 80 Regular Rotary Table & Small Chuck, Back Plate, T Nuts (usa Fulfilled)
3/ 80 Regular Rotary Table & Small Chuck, Back Plate, T Nuts (usa Fulfilled)

3/ 80 Regular Rotary Table & Small Chuck, Back Plate, T Nuts (usa Fulfilled)
3/ 80 MM SMALL MILLING ROTARY TABLE WITH 70 MM 4 JAW INDEPENDENT CHUCK & BACK PLATE + FIXING TNUTS BOLTS. ROTARY TABLE COMBO. A PERFECT QUALITY MILLING COMBO FOR YOUR SMALL MILLING MACHINE NEEDS. SET INCLUDES A 3 INCHES/80 MM LOW PROFILE ROTARY TABLE & 70 MM 4 JAWS INDEPENDENT CHUCK WITH BACK PLATE & FIXING T NUTS BOLTS. THE ROTARY TABLE AND CHUCK ASSEMBLY CAN BE MOUNTED BOTH HORIZONTALLY & VERTICALLY. WORM : GEAR RATION IS 1: 10, THAT MEANS ONE HANDLE ROTATION TURNS THE 360 DEGREES GRADUATION TABLE BY 10 DEGREES. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tools4every1″ and is located in this country: US. This item can be shipped to United States.
  • SIZE: (70MM 4 JAW INDEPENDENT CHUCK)
  • Brand: tools4every1
  • Tilting: No
  • Custom Bundle: No
  • Cross-Slide: Yes
  • Setting Position: Horizontal/Vertical
  • Operation: Manual
  • Country/Region of Manufacture: India
  • Modified Item: No

3/ 80 Regular Rotary Table & Small Chuck, Back Plate, T Nuts (usa Fulfilled)
back, chuck, fulfilled, nuts, plate, regular, rotary, small, table
previous page · next page
4_100mm_Rotary_Table_Milling_Indexing_M6_Clamp_Kit_Round_Vice_Vise_Machine_01_ny

4” 100mm Rotary Table Milling Indexing M6 Clamp Kit & Round Vice/Vise Machine

4'' 100mm Rotary Table Milling Indexing M6 Clamp Kit & Round Vice/Vise Machine
4'' 100mm Rotary Table Milling Indexing M6 Clamp Kit & Round Vice/Vise Machine
4'' 100mm Rotary Table Milling Indexing M6 Clamp Kit & Round Vice/Vise Machine
4'' 100mm Rotary Table Milling Indexing M6 Clamp Kit & Round Vice/Vise Machine

4'' 100mm Rotary Table Milling Indexing M6 Clamp Kit & Round Vice/Vise Machine
SET OF QUALITY 4 INCHES/ 100 MM REGULAR ROTARY TABLE WITH SUITABLE M6 CLAMP KIT & 80 MM ROUND AMD 100 MM ROUND VISES/ VICES. TABLE DIAMETER IS 4 / 100 MM & IS GRADUATED 360 DEGREES. WORM: GEAR RATIO IS 1: 36, WHICH MEANS 1 HANDLE ROTATION TURNS THE TABLE BY 10 DEGREES. CENTER HEIGHT IN VERTICAL POSITION 2-1/16/ 50 MM (ONLY THE TABLE). IT CAN BE MOUNTED HORIZONTALLY AND VERTICALLY. SUPPLIED WITH A CLAMP KIT & QUALITY CASTE IRON ROUND VICE WITH CLAMPING T NUTS. THE MOVING JAW HAS VERTICAL & HORIZONTAL V GROOVES TO HOLD A ROUND JOB. TO USA & WORLWIDE. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tools-shop2020″ and is located in this country: IN. This item can be shipped worldwide.
  • Operation: Manual
  • SIZE: (With 80mm Round Vice)
  • Setting Position: Horizontal/Vertical
  • Brand: Unbranded

4'' 100mm Rotary Table Milling Indexing M6 Clamp Kit & Round Vice/Vise Machine
100mm, clamp, indexing, machine, milling, rotary, table, vicevise
previous page · next page
HV6_precision_Horizontal_Vertical_3_slot_Rotary_Table_USA_Rahistools_01_cla

HV6 precision Horizontal & Vertical 3 slot Rotary Table USA Rahistools

HV6 precision Horizontal & Vertical 3 slot Rotary Table USA Rahistools
HV6 precision Horizontal & Vertical 3 slot Rotary Table USA Rahistools
HV6 precision Horizontal & Vertical 3 slot Rotary Table USA Rahistools
HV6 precision Horizontal & Vertical 3 slot Rotary Table USA Rahistools
HV6 precision Horizontal & Vertical 3 slot Rotary Table USA Rahistools
HV6 precision Horizontal & Vertical 3 slot Rotary Table USA Rahistools
HV6 precision Horizontal & Vertical 3 slot Rotary Table USA Rahistools
HV6 precision Horizontal & Vertical 3 slot Rotary Table USA Rahistools
HV6 precision Horizontal & Vertical 3 slot Rotary Table USA Rahistools
HV6 precision Horizontal & Vertical 3 slot Rotary Table USA Rahistools

HV6 precision Horizontal & Vertical 3 slot Rotary Table USA Rahistools
6 precision Horizontal & Vertical 3 slot Rotary Table ISO9001 Part#TSL150 New. PRECISION 3 slot ROTARY TABLE /HORIZONTAL&VERTICAL – NEW. Graduated 360 degree around its circumference and driven by precision gear with 1:90 reduction ratio. One turn by handle moves table 4 degrees. DUAL POSITIVE ACTION LOCKS. 10 SECONDS VERNIER READING. GEAR DRIVE IMMERSED IN IOL. OPTIONAL DRIVING PLATES AND TAILSTOCK. PROUDLY MADE IN INDIA. ACTOOLS comprises of a dedicated and skilled team of engineers with an aim of providing you tools of highest indian industrial standards. Situated at the industrial hub of. We specialize in providing complete tooling solutions. Our Motto : Right Quality. We ensure the product reaches you at the earliest. We are looking forward to your positive reviews and to build a long term relationship. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “actools_123″ and is located in this country: IN. This item can be shipped worldwide.
  • Brand: ACTOOLS
  • Tilting: No
  • Custom Bundle: No
  • Cross-Slide: No
  • Setting Position: Horizontal/Vertical
  • Operation: Manual
  • Country/Region of Manufacture: India
  • Modified Item: No
  • UPC: 9010491773889

HV6 precision Horizontal & Vertical 3 slot Rotary Table USA Rahistools
horizontal, precision, rahistools, rotary, slot, table, vertical
previous page · next page
Brand_New_Rotary_Table_3_inch_75mm_Horizontal_Vertical_Model_Machine_Tools_01_saga

Brand New Rotary Table 3 inch 75mm Horizontal & Vertical Model Machine Tools

Brand New Rotary Table 3 inch 75mm Horizontal & Vertical Model Machine Tools
Brand New Rotary Table 3 inch 75mm Horizontal & Vertical Model Machine Tools
Brand New Rotary Table 3 inch 75mm Horizontal & Vertical Model Machine Tools
Brand New Rotary Table 3 inch 75mm Horizontal & Vertical Model Machine Tools
Brand New Rotary Table 3 inch 75mm Horizontal & Vertical Model Machine Tools
Brand New Rotary Table 3 inch 75mm Horizontal & Vertical Model Machine Tools

Brand New Rotary Table 3 inch 75mm Horizontal & Vertical Model Machine Tools
Precision Small low profile Rotary Table for Milling operation with Table Diameter – 3 Inches (75 mm) Vertical Height – 1-5/8 Inch. Gear Ratio – 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees. 1/4″ 4 T-Slots: 5/16″. Table scale is calibrated in 5 degree increement. Can be used both in horizontal & vertical position. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tools4every1″ and is located in this country: IN. This item can be shipped worldwide.
  • Setting Position: Horizontal/Vertical
  • Operation: Manual
  • Brand: Unbranded

Brand New Rotary Table 3 inch 75mm Horizontal & Vertical Model Machine Tools
75mm, brand, horizontal, inch, machine, model, rotary, table, tools, vertical
previous page · next page
34_diameter_Rotary_Indexer_welding_positioner_unable_to_test_parts_repair_C93_01_cdmm

34 diameter Rotary Indexer welding positioner unable to test parts/repair C93

34 diameter Rotary Indexer welding positioner unable to test parts/repair C93
34 diameter Rotary Indexer welding positioner unable to test parts/repair C93
34 diameter Rotary Indexer welding positioner unable to test parts/repair C93
34 diameter Rotary Indexer welding positioner unable to test parts/repair C93
34 diameter Rotary Indexer welding positioner unable to test parts/repair C93
34 diameter Rotary Indexer welding positioner unable to test parts/repair C93
34 diameter Rotary Indexer welding positioner unable to test parts/repair C93

34 diameter Rotary Indexer welding positioner unable to test parts/repair C93
Appears to be hydraulic drive maybe. Condition of table surface is good. Does not appear to be beat up. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “stellar_reseller” and is located in this country: US. This item can be shipped to United States.
  • Brand: Unbranded
  • Setting Position: Horizontal/Vertical

34 diameter Rotary Indexer welding positioner unable to test parts/repair C93
diameter, indexer, partsrepair, positioner, rotary, test, unable, welding
previous page · next page
Horizontal_Circular_Motion_Is_Converted_Into_Vertical_Motion_01_bexz

Horizontal Circular Motion Is Converted Into Vertical Motion

circular, converted, horizontal, motion, vertical
previous page · next page
2019_HAAS_HRT160_Rotary_Table_4th_Axis_Indexer_Sigma_5_01_aqxd

2019 HAAS HRT160 Rotary Table 4th-Axis Indexer Sigma 5

2019 HAAS HRT160 Rotary Table 4th-Axis Indexer Sigma 5
2019 HAAS HRT160 Rotary Table 4th-Axis Indexer Sigma 5
2019 HAAS HRT160 Rotary Table 4th-Axis Indexer Sigma 5
2019 HAAS HRT160 Rotary Table 4th-Axis Indexer Sigma 5
2019 HAAS HRT160 Rotary Table 4th-Axis Indexer Sigma 5

2019 HAAS HRT160 Rotary Table 4th-Axis Indexer Sigma 5
2019 HAAS HRT160 Rotary Table 4th-Axis Indexer Sigma 5. No issues, only 2 years of use. Comes with a custom made aluminum base (1.5 thickness) machined to fit perfectly on any HAAS table. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “perrucho2000″ and is located in this country: US. This item can be shipped to United States.
  • Brand: Haas
  • Tilting: No
  • Cross-Slide: No
  • Setting Position: Horizontal/Vertical
  • MPN: HRT160
  • Operation: CNC

2019 HAAS HRT160 Rotary Table 4th-Axis Indexer Sigma 5
4th-axis, haas, hrt160, indexer, rotary, sigma, table
previous page · next page