3 Rotary Table (tilting) Used In Horizontal& Vertical (4slot)
DESIGNED TO TILT BETWEEN 0- 90 DEGREES & CAN BE LOCKED AT ANY POSITION. TABLE DIAMETER – 3 INCHES (75 MM). WORM- GEAR RATIO – 36:1, WHICH BASICALLY MEANS THAT THE 1 ROTATION OF THE HANDLE SHALL ROTATE THE TABLE BY 10 DEGREES. CAN BE USED BOTH IN HORIZONTAL & VERTICAL POSTION. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “3 ROTARY TABLE (TILTING) USED IN HORIZONTAL& VERTICAL (4SLOT)” is in sale since Thursday, October 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
6 Horizontal/vertical Rotary Table (3903-2306)
AIR, POWER & HAND TOOLS. CUTTING & CARBIDE TOOLS. MRO & SHOP SUPPLIES. Thank you for shopping with us! 6 Inch Horizontal/Vertical Rotary Table Dividing plates are interchangeable with Phase II. T-slots are machined within acceptable tolerances. T-slot width is 0.390. Worm gear is is easily disengaged for free rotation. 90:1 gear ratio. Long life and continued accuracy is assured by a convenient adjustment to compensate for wear. All rotary table parts are strategically positioned for easy access. The one piece worm and shaft are hobbed from a solid alloy steel. Extra deep coolant channel. 10 second vernier reading. Dual positive action locks. Gear drive is immersed in oil. 2 MT center hole with 4 T-slots. Vertical center height is 4.93. The engraved graduations are both crisp and clear to eliminate erroneous readings. High precision bearing surfaces insure ultra-smooth rotation. Superior grade meehanite castings provide the ultimate rigidity. All rotary tables are precision ground to meet the most extracting requirements and are individually supplied with a certificate of inspection. Some browsers do not allow this option. The item “6 HORIZONTAL/VERTICAL ROTARY TABLE (3903-2306)” is in sale since Wednesday, March 23, 2016. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “hhindt” and is located in Chino, California. This item can be shipped to United States.
- Brand: HHIP
- MPN: 3903-2306
Hv6 Rotary Table(4 Slot) With Indexing Plate Set & 150mm 4jaw Independent Chuck
Precision Rotary Table 6/150mm. With Dividing Plate Set &. 150mm 4 Jaw Independent Chuck. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. T Slot 16 mm. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. 150 mm Independent Chuck & Backplate. A high Quality 4 Jaw Independent chuck, the body of chuck is made from SG Iron & Jaws are of Tool steel hardened & ground. Same Jaws are reversible as well. We reply within 24 hours. Thanks for Visiting our Store. The item “HV6 ROTARY TABLE(4 SLOT) WITH INDEXING PLATE SET & 150MM 4JAW INDEPENDENT CHUCK” is in sale since Wednesday, October 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
Hv4 Rotary Table(3slot), 100mm Independent Chuck+dividing Plate+clamping Kit
ROTARY TABLE 4 (HV4). High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 110 mm, Table Height 80 mm, Centre Height 80 mm. Centre Has a MT-2 Taper, Worm Gear Is 90-1. Vernier Scale Calibrated To 10 Seconds. Quick Release System for Manual Indexing. And Has 3 Tee Slots. Available in Wrinkle Paint. 100 mm Independent Chuck & Backplate. A high Quality 4 Jaw Independent chuck, the body of chuck is made from SG Iron & Jaws are of Tool steel hardened & ground. Same Jaws are reversible as well. Supplied with a mounting back plate & fixing tee nuts with screws. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The chuck mounting is Thread M14 x 1. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. We reply within 24 hours. Thanks for Visiting our Store. The item “HV4 ROTARY TABLE(3SLOT), 100MM INDEPENDENT CHUCK+DIVIDING PLATE+CLAMPING KIT” is in sale since Wednesday, October 21, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
VERTEX 3900-2328 Horizontal/Vertical Rotary Table, 8
This product is New. (as inspected by our Amazing Team), but. The box has material damage. (on average over the last 90 days). 10 second Vernier reading with a gear ratio of 90:1. One rotation of handle equals 4° on collar. Overall Horizontal Height: 4.1″, Overall Vertical Height: 10.4″. Center Hole: 3MT, Vertical Center Height: 5.3. 3 T-Slots, T-Slot Size. The item “VERTEX 3900-2328 Horizontal/Vertical Rotary Table, 8″ is in sale since Saturday, March 6, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “abusallc” and is located in Buffalo, New York. This item can be shipped to United States.
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Brand: Vertex
New Rotary Table 8/ 200mm kit, Dividing Plate Set, Tail Stock & Clamps
Integrates of Rotary Kit. Rotary Table 8 / 200 mm. Tail stock which is suitable for Rotary Table. Weight :- 42 Kgs / 92.4 Lbs. Gear Ratio:- 90:1. Made of ductile cast iron and precision ground The worktable is graduated to a full 360° MT 3 centre for holding work pieces worm gear ration is 90:1 making one turn of the handle move the table 4 degrees vernier scale makes setting down to 10 secs possible quick release system for manual indexing. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular tool path, on small milling machines. To cut straight lines &. Height can be varied while working with different index centres while the angle of inclination can be changed for various machining applications. The tip of centre is finely rotatable. The dead centre of the tail stock should be in line with the centre of the rotary table. Tail stock suitable for 8/200 mm Rotary Table. 8 / 200mm. 4.3/4 / 120mm. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a rotary table. On a milling machine. Usually used to apply support to the longitudinal rotary. Axis of a work piece being machined. Centre is mounted in the tail stock, and inserted against the sides of a hole in the centre of the work piece. A tail stock has a Dead Centre, while. A Tail stock is particularly useful when the work piece is relatively long and slender. The divisions of preset holes are provided for the most common angles such as 30, 45 and 90. The remaining divisions of the circle are provided for manually rotating the dividing arm using the plates. The colour of item can be vary depend upon availability. The item “New Rotary Table 8/ 200mm kit, Dividing Plate Set, Tail Stock & Clamps” is in sale since Friday, March 15, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped worldwide.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Country/Region of Manufacture: India
- Operation: Manual
- Weight of Kit: 42 Kgs / 92.4 Lbs
- Brand: Unbranded
HV6 Rotary table 3 SLOTS Horizontal & Vertical Precision Quality
Precision Rotary Table 6/150mm. Manufactured from High grade seasons casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Graduated 360 degree around its circumference. The item “HV6 Rotary table 3 SLOTS Horizontal & Vertical Precision Quality” is in sale since Thursday, February 4, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
Horizontal Vertical HV6 Rotary Table 6 / 150MM 4 Slot For Milling Machine
Horizontal Vertical HV6 Rotary Table 6 / 150MM – 4 Slot For Milling Machine. 6 Rotary Table 6 / 150MM. Can be used in horizontal or vertical position. Gear Ratio 90:1 Center Bore MT-2 T Slot 16mm. Dials Graduated 360 degree. Precision Rotary Table 6/150mm Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1 Center Bore MT-2 T Slot 16mm 4 Slot Horizontal Height : Approx 80 mm from Base to Top surface of Chuck Satin Chrome Dials Graduated 360 degree around its circumference. The item “Horizontal Vertical HV6 Rotary Table 6 / 150MM 4 Slot For Milling Machine” is in sale since Wednesday, February 5, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “24*7herbaldeals” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Brand: Unbranded
Hv4 Rotary Table (4 Slot) With Tailstock & Indexing/dividing Plate Set
Rotary Table HV4 4 Slot. With Tailstock & Dividing Plate. High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 110 mm, Table Height 80 mm, Center Height 80 mm. Center Has a MT-2 Taper, Worm Gear Is 90-1. Vernier Scale Calibrated To 10 Seconds. Quick Release System for Manual Indexing. And Has 4 Tee Slots. Supplied with Dividing Plate Set for Indexing & a Tailstock for a total Indexing solution. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. This Combination completes with TAILSTOCK, it is USED BETWEEN CENTER to Center WORK IS REQUIRED. It is ADJUSTABLE FOR DIFFERENT HEIGHTS 80 mm TO 110 mm. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “HV4 ROTARY TABLE (4 SLOT) WITH TAILSTOCK & INDEXING/DIVIDING PLATE SET” is in sale since Thursday, October 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded