6_Rotary_Table_3_Slot_With_Dividing_Plate_set_Tailstock_M8_Clamping_Kit_01_wxl

6 Rotary Table 3 Slot With Dividing Plate set, Tailstock & M8 Clamping Kit

6 Rotary Table 3 Slot With Dividing Plate set, Tailstock & M8 Clamping Kit
6 Rotary Table 3 Slot With Dividing Plate set, Tailstock & M8 Clamping Kit
6 Rotary Table 3 Slot With Dividing Plate set, Tailstock & M8 Clamping Kit
6 Rotary Table 3 Slot With Dividing Plate set, Tailstock & M8 Clamping Kit

6 Rotary Table 3 Slot With Dividing Plate set, Tailstock & M8 Clamping Kit
Precision Rotary Table 6/150mm. With Dividing Plate Set, Tailstock & M8 Clamping Kit. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80mm from Base to Top surface of Chuck. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. It is an adjustable height tailstock used when you need to support a long part held in the rotary. Table- such as cutting a spline on a shaft. Precision made of heavy cast iron, it has a base for mounting to the mill table with T- bolts. Manufactured from Seasoned Grade Casting. Adjustable to Center Heights from 85 – 110 mm. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “6 Rotary Table 3 Slot With Dividing Plate set, Tailstock & M8 Clamping Kit” is in sale since Thursday, October 8, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
  • Setting Position: Horizontal/Vertical
  • Operation: Manual
  • MPN: Does Not Apply
  • Brand: Unbranded

6 Rotary Table 3 Slot With Dividing Plate set, Tailstock & M8 Clamping Kit
clamping, dividing, plate, rotary, slot, table, tailstock
previous page · next page
Rotary_Table_HV4_4SLOT_with_100_mm_Chuck_Tailstock_Indexing_Plate_Set_01_epmb

Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set

Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set
Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set
Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set
Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set
Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set
Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set
Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set
Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set
Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set
Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set
Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set
Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set

Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set
With 100 mm Self Centering Chuck, Back plate. Tailstock for HV4 and HV6 & Indexing Plate Set. Rotary Table HV4 with 100 mm Self Centering Chuck & Back plate. Our Rotary Table HV4 is having a Table Diameter : 110 mm (4-3/8). Table Height: 80 mm (3 -1/8). Worm Gear Ratio – 1:90, which means that 1 handle rotation shall turn the table by 4 Degrees. Center Bore of the Table MT2. Table Graduated 360 Degrees. Hand wheel graduated in seconds. Vernier scale is calibrated to 10 seconds. 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. It is combined with a high Quality 80 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate, fixing tee nuts with screws, 100 mm Self Centering Chuck, Tailstock for HV4 and HV6, & Indexing Plate Set. Designed to fit our 3 or 4 Rotary table with either 3 or 4 slots. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play. Fit to our HV4 and HV6, Tilting Rotary Tables 100 mm. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. Tail stock for HV4 & HV6. Its made of good Quality of Cast Iron. Height is adjustable from 80 mm to 110 mm. It is used on our HV4 & HV6 ROTARY TABLE. It is USED WHEN BETWEEN CENTER WORK IS REQUIRED. THESE ARE ADJUSTABLE FOR DIFFERENT HEIGHTS & Having fine feed center point and the center tip is hardened and Ground. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set” is in sale since Monday, February 24, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “perfetto_pan” and is located in DELHI, DELHI. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Custom Bundle: No
  • Setting Position: Horizontal/Vertical
  • Bundle Listing: Yes
  • Non-Domestic Product: No
  • Operation: Manual
  • MPN: Does Not Apply
  • Brand: Unbranded/Generic

Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set
4slot, chuck, indexing, plate, rotary, table, tailstock
previous page · next page
2_3_4_Watchmaking_Rotary_Table_50_MM_3_Jaws_Self_Centering_Chuck_back_Plate_01_hnys

2-3/4 Watchmaking Rotary Table, 50 MM 3 Jaws Self Centering Chuck +back Plate

2-3/4 Watchmaking Rotary Table, 50 MM 3 Jaws Self Centering Chuck +back Plate
2-3/4 Watchmaking Rotary Table, 50 MM 3 Jaws Self Centering Chuck +back Plate

2-3/4 Watchmaking Rotary Table, 50 MM 3 Jaws Self Centering Chuck +back Plate
Set includes 2.75 Inches Rotary Table-4 Slots with a 50 mm 3 jaws self centering chuck & back plate + T nuts. Supplied with a Quality 50 mm Small 3 jaws self centering chuck & a Back Plate with fixings. Worm- Gear Ratio is 1: 48, which means that 1 handle rotation shall turn the table 7.5 degrees. Most preferred choice of Watch makers, Jewelry Tools, Model Makers & Hobbyists. The item “2-3/4 WATCHMAKING ROTARY TABLE, 50 MM 3 JAWS SELF CENTERING CHUCK +BACK PLATE” is in sale since Monday, November 30, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “globaltools2016″ and is located in Delhi, Delhi. This item can be shipped worldwide.
  • Setting Position: Horizontal/Vertical
  • Operation: Manual
  • MPN: Does Not Apply
  • Brand: Unbranded

2-3/4 Watchmaking Rotary Table, 50 MM 3 Jaws Self Centering Chuck +back Plate
2-34, back, centering, chuck, jaws, plate, rotary, self, table, watchmaking
previous page · next page
New_Rotary_Table_3_75mm_4jaw_Chuck_Self_Centring_with_Back_Plate_Set_Clamping_01_crm

New Rotary Table 3/75mm, 4jaw Chuck Self Centring with Back Plate Set, Clamping

New Rotary Table 3/75mm, 4jaw Chuck Self Centring with Back Plate Set, Clamping
New Rotary Table 3/75mm, 4jaw Chuck Self Centring with Back Plate Set, Clamping
New Rotary Table 3/75mm, 4jaw Chuck Self Centring with Back Plate Set, Clamping

New Rotary Table 3/75mm, 4jaw Chuck Self Centring with Back Plate Set, Clamping
Integrates of Rotary Kit. Rotary Table 3/75 mm. 2 4 Jaw Chuck Self Centering with Back Plate 70mm. Weight of Kit :- 3.8 Kgs / 8.36 Lbs. Chuck Size:- 70mm. Precision ground horizontally and vertically. Graded cast iron and precision ground. The work table is graduated to full 360 degrees. Gear Ratio 36:1. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws. There is a fixture plate on which the chuck is mounted. The colour of item can be vary depend upon availability. The item “New Rotary Table 3/75mm, 4jaw Chuck Self Centring with Back Plate Set, Clamping” is in sale since Monday, March 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Custom Bundle: No
  • Setting Position: Horizontal/Vertical
  • MPN: Does Not Apply
  • Modified Item: No
  • Chuck size: 4 Jaw Chuck Self Centering 70 mm plate
  • Country/Region of Manufacture: India
  • Weight of Kit: 3.8 Kgs / 8.36 Lbs
  • Operation: Manual
  • Brand: Unbranded

New Rotary Table 3/75mm, 4jaw Chuck Self Centring with Back Plate Set, Clamping
375mm, 4jaw, back, centring, chuck, clamping, plate, rotary, self, table
previous page · next page
Rotary_Table_Hv4_4_Slot_With_Indexing_Plate_Set_Dividing_Plate_Set_01_fh

Rotary Table Hv4 (4 Slot) With Indexing Plate Set / Dividing Plate Set

Rotary Table Hv4 (4 Slot) With Indexing Plate Set / Dividing Plate Set
Rotary Table Hv4 (4 Slot) With Indexing Plate Set / Dividing Plate Set
Rotary Table Hv4 (4 Slot) With Indexing Plate Set / Dividing Plate Set
Rotary Table Hv4 (4 Slot) With Indexing Plate Set / Dividing Plate Set
Rotary Table Hv4 (4 Slot) With Indexing Plate Set / Dividing Plate Set
Rotary Table Hv4 (4 Slot) With Indexing Plate Set / Dividing Plate Set
Rotary Table Hv4 (4 Slot) With Indexing Plate Set / Dividing Plate Set

Rotary Table Hv4 (4 Slot) With Indexing Plate Set / Dividing Plate Set
ROTARY TABLE HV4 WITH INDEXING PLATE SET FEATURES. High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 110 mm, Table Height 80 mm, Center Height 80 mm. Center Has a MT-2 Taper, Worm Gear Is 90-1. Vernier Scale Calibrated To 10 Seconds. Quick Release System for Manual Indexing. And Has 4 Tee Slots. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. The item “ROTARY TABLE HV4 (4 SLOT) WITH INDEXING PLATE SET / DIVIDING PLATE SET” is in sale since Wednesday, January 15, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “easystreet_hangout” and is located in DASNA, UTTAR PRADESH. This item can be shipped worldwide.
  • Country/Region of Manufacture: India
  • Custom Bundle: No
  • Setting Position: Horizontal/Vertical
  • Tilting: No
  • Operation: Manual
  • MPN: Does Not Apply
  • Cross-Slide: No
  • Brand: Unbranded

Rotary Table Hv4 (4 Slot) With Indexing Plate Set / Dividing Plate Set
dividing, indexing, plate, rotary, slot, table
previous page · next page
Precision_6_Rotary_Table_With_Indexing_Plate_Set_Tailstock_M8_Clamping_Kit_01_tvmp

Precision 6 Rotary Table With Indexing Plate Set, Tailstock & M8 Clamping Kit

Precision 6 Rotary Table With Indexing Plate Set, Tailstock & M8 Clamping Kit
Precision 6 Rotary Table With Indexing Plate Set, Tailstock & M8 Clamping Kit
Precision 6 Rotary Table With Indexing Plate Set, Tailstock & M8 Clamping Kit
Precision 6 Rotary Table With Indexing Plate Set, Tailstock & M8 Clamping Kit
Precision 6 Rotary Table With Indexing Plate Set, Tailstock & M8 Clamping Kit
Precision 6 Rotary Table With Indexing Plate Set, Tailstock & M8 Clamping Kit

Precision 6 Rotary Table With Indexing Plate Set, Tailstock & M8 Clamping Kit
Precision Rotary Table 6/150mm. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Graduated 360 degree around its circumference. CLAMPING KIT SET M8. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. Tailstock for Rotary Table 6. Its made of good Quality of Cast Iron. Height is adjustable from 80 mm to 110 mm. It is used on our HV4 & HV6 ROTARY TABLE. It is USED WHEN BETWEEN CENTRE WORK IS REQUIRED. THESE ARE ADJUSTABLE FOR DIFFERENT HEIGHTS & Having fine feed centre point and the centre tip is hardened and Ground. INDEXING PLATES SET FOR HV4 & HV6. Fit to our HV4 and HV6, Tilting Rotary Tables 100 mm. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. The item “PRECISION 6 ROTARY TABLE WITH INDEXING PLATE SET, TAILSTOCK & M8 CLAMPING KIT” is in sale since Tuesday, July 21, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “expert.tools” and is located in Delhi, DELHI. This item can be shipped worldwide.
  • Country/Region of Manufacture: India
  • Setting Position: Horizontal/Vertical
  • Tilting: No
  • Table graduated: 360 degrees
  • Operation: Manual
  • MPN: Does Not Apply
  • Cross-Slide: No
  • Brand: RUTWIK ENGINEERS

Precision 6 Rotary Table With Indexing Plate Set, Tailstock & M8 Clamping Kit
clamping, indexing, plate, precision, rotary, table, tailstock
previous page · next page
Hv6_Rotary_Table_4_Slot_With_Indexing_Plate_Set_Tailstock_M8_Clamping_Kit_01_zw

Hv6 Rotary Table (4 Slot) With Indexing Plate Set, Tailstock & M8 Clamping Kit

Hv6 Rotary Table (4 Slot) With Indexing Plate Set, Tailstock & M8 Clamping Kit
Hv6 Rotary Table (4 Slot) With Indexing Plate Set, Tailstock & M8 Clamping Kit
Hv6 Rotary Table (4 Slot) With Indexing Plate Set, Tailstock & M8 Clamping Kit

Hv6 Rotary Table (4 Slot) With Indexing Plate Set, Tailstock & M8 Clamping Kit
Precision Rotary Table 6/150 mm. With Dividing Plate Set, Tail stock & M 8 Clamping Kit. Manufactured from High grade seasons casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. T Slot 16 mm. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. Adjustable Height Tail stock. It is an adjustable height tail stock used when you need to support a long part held in the rotary. Table- such as cutting a spline on a shaft. Precision made of heavy cast iron, it has a base for mounting to the mill table with T- bolts. Manufactured from Seasoned Grade Casting. Adjustable to Center Heights from 85 – 110 mm. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “HV6 ROTARY TABLE (4 SLOT) WITH INDEXING PLATE SET, TAILSTOCK & M8 CLAMPING KIT” is in sale since Monday, October 5, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “proffesional_tools” and is located in DELHI, DELHI. This item can be shipped worldwide.
  • Tilting: No
  • Custom Bundle: No
  • Setting Position: Horizontal/Vertical
  • MPN: Does Not Apply
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Operation: Manual
  • Brand: Unbranded
  • Cross-Slide: No

Hv6 Rotary Table (4 Slot) With Indexing Plate Set, Tailstock & M8 Clamping Kit
clamping, indexing, plate, rotary, slot, table, tailstock
previous page · next page
New_Rotary_Table_4_100mm_Tilting_80mm_3Jaw_Chuck_Back_Plate_Tail_Stock_Clamps_01_ug

New Rotary Table 4/100mm Tilting 80mm 3Jaw Chuck Back Plate, Tail Stock &Clamps

New Rotary Table 4/100mm Tilting 80mm 3Jaw Chuck Back Plate, Tail Stock &Clamps
New Rotary Table 4/100mm Tilting 80mm 3Jaw Chuck Back Plate, Tail Stock &Clamps
New Rotary Table 4/100mm Tilting 80mm 3Jaw Chuck Back Plate, Tail Stock &Clamps
New Rotary Table 4/100mm Tilting 80mm 3Jaw Chuck Back Plate, Tail Stock &Clamps
New Rotary Table 4/100mm Tilting 80mm 3Jaw Chuck Back Plate, Tail Stock &Clamps
New Rotary Table 4/100mm Tilting 80mm 3Jaw Chuck Back Plate, Tail Stock &Clamps

New Rotary Table 4/100mm Tilting 80mm 3Jaw Chuck Back Plate, Tail Stock &Clamps
Integrates of Rotary Kit. Rotary Table with Tilting 4/100 mm. 2 3Jaw Chuck with Back Plate 80mm. Weight :- 10 Kgs / 22 Lbs. Table Dia:- 4/100 MM. Tee Slot:- M 6. Gear Ratio :- 36:1. Rotary Table Tilting Type 4/100 mm has a gear ratio of 36:1 suitable for working horizontally and vertically. Can be set on an angle for holding precision jobs. Angular marking is very precise making working easy. Rotary Table Uses. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. Height can be varied while working with different index centers while the angle of inclination can be changed for various machining applications. The tip of center is finely rotatable. The dead center of the tail stock should be in line with the center of the rotary table. Tail stock suitable f or 3″ & 4″ Rotary Table. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a rotary. On a milling machine. Usually used to apply support to the longitudinal rotary. Axis of a work-piece being machined. Center is mounted in the tail stock, and inserted against the sides of a hole in the center of the work-piece. A tail stock has a Dead center, while. A Tail stock is particularly useful when the work-piece is relatively long and slender. 3.3/8 / 85mm. 1.1/2 / 38mm. The 3 jaw chuck has a big range clamping. The chuck has 3 reversible jaws. There is a fixture plate on which the chuck is mounted. These chucks ideal for gripping non-circular cross sections and gripping circular cross sections with extreme precision. The color of item can be vary depend upon availability. The item “New Rotary Table 4/100mm Tilting 80mm 3Jaw Chuck Back Plate, Tail Stock &Clamps” is in sale since Wednesday, March 20, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Tilting: Yes
  • Custom Bundle: No
  • Setting Position: Horizontal/Vertical
  • MPN: Does Not Apply
  • Tee Slot: M 6
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Weight of Kit: 10 Kgs / 22 Lbs
  • Centre Height Min:: 3.3/8″ / 85mm
  • Operation: Manual
  • Rotary Table: 4”/100mm
  • Gear Ratio: 36:1
  • Chuck Size: 80mm
  • Brand: Unbranded
  • Cross-Slide: Yes
  • Centre Height Max:: 1.1/2″ / 38mm

New Rotary Table 4/100mm Tilting 80mm 3Jaw Chuck Back Plate, Tail Stock &Clamps
3jaw, 4100mm, 80mm, back, chuck, clamps, plate, rotary, stock, table, tail, tilting
previous page · next page
New_Rotary_Table_4_5_16_100_mm_4_Jaw_Independent_Chuck_with_Back_Divide_Plate_01_uap

New Rotary Table 4.5/16/100 mm, 4 Jaw Independent Chuck with Back & Divide Plate

New Rotary Table 4.5/16/100 mm, 4 Jaw Independent Chuck with Back & Divide Plate
New Rotary Table 4.5/16/100 mm, 4 Jaw Independent Chuck with Back & Divide Plate
New Rotary Table 4.5/16/100 mm, 4 Jaw Independent Chuck with Back & Divide Plate
New Rotary Table 4.5/16/100 mm, 4 Jaw Independent Chuck with Back & Divide Plate
New Rotary Table 4.5/16/100 mm, 4 Jaw Independent Chuck with Back & Divide Plate

New Rotary Table 4.5/16/100 mm, 4 Jaw Independent Chuck with Back & Divide Plate
Integrates of Rotary Kit. Rotary Table 4.5/16/110 mm. 2 4 Jaw Chuck independent chuck with Back Plate 80mm. Weight of Kit :- 17 Kgs / 37.4 Lbs. Gear Ratio:- 90:1. Made of ductile cast iron and precision ground The worktable is graduated to a full 360° MT 2 centre for holding work pieces worm gear ration is 90:1 making one turn of the handle move the table 4° vernier scale makes setting down to 10 secs possible quick release system for manual indexing. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws and. Jaw can be moved independently. There is a fixture plate on which the chuck is mounted. These chucks ideal for gripping non-circular cross sections and gripping circular cross sections with extreme precision. Height can be varied while working with different index centres while the angle of inclination can be changed for various machining applications. The tip of centre is finely rotatable. The dead centre of the tail stock should be in line with the centre of the rotary table. Tail stock suitable for 6″ & 4.5/16″ Rotary Table. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a. On a milling machine. Usually used to apply support to the longitudinal. Axis of a work-piece being machined. Is mounted in the tail stock, and inserted against the sides of a hole in the centre of the work-piece. A tail stock has a Dead centre , while. A Tail stock is particularly useful when the work-piece is relatively long and slender. 6.1/4 / 108mm. 3.3/16 / 80mm. He divisions of preset holes are provided for the most common angles such as 30, 45 and 90. The remaining divisions of the circle are provided for manually rotating the dividing arm using the plates. The colour of item can be vary depend upon availability. The item “New Rotary Table 4.5/16/100 mm, 4 Jaw Independent Chuck with Back & Divide Plate” is in sale since Monday, March 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia.
  • California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Custom Bundle: No
  • Setting Position: Horizontal/Vertical
  • MPN: Does Not Apply
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Weight of Kit: 17 Kgs / 37.4 Lbs
  • Operation: Manual
  • Rotary Table: 4.5/16” /110mm
  • Gear Ratio: 90:1
  • Chuck Size: 80mm
  • Brand: Unbranded

New Rotary Table 4.5/16/100 mm, 4 Jaw Independent Chuck with Back & Divide Plate
back, chuck, divide, independent, plate, rotary, table
previous page · next page
New_Rotary_Table_6_150mm_4jaw_Indep_Chuck_with_Back_Dividing_Plate_Tailstock_01_mtsq

New Rotary Table 6/150mm, 4jaw Indep. Chuck with Back & Dividing Plate Tailstock

New Rotary Table 6/150mm, 4jaw Indep. Chuck with Back & Dividing Plate Tailstock
New Rotary Table 6/150mm, 4jaw Indep. Chuck with Back & Dividing Plate Tailstock
New Rotary Table 6/150mm, 4jaw Indep. Chuck with Back & Dividing Plate Tailstock
New Rotary Table 6/150mm, 4jaw Indep. Chuck with Back & Dividing Plate Tailstock
New Rotary Table 6/150mm, 4jaw Indep. Chuck with Back & Dividing Plate Tailstock
New Rotary Table 6/150mm, 4jaw Indep. Chuck with Back & Dividing Plate Tailstock

New Rotary Table 6/150mm, 4jaw Indep. Chuck with Back & Dividing Plate Tailstock
Integrates of Rotary Kit. Rotary Table 6/150 mm. 2 4 Jaw Chuck Independent chuck with Back Plate 100mm. Weight of Kit :- 21 Kgs / 46.2 Lbs. Gear Ratio:- 90:1. Made of ductile cast iron and precision ground The worktable is graduated to a full 360° MT 2 centre for holding work pieces worm gear ration is 90:1 making one turn of the handle move the table 4° vernier scale makes setting down to 10 secs possible quick release system for manual indexing. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws and. Jaw can be moved independently. There is a fixture plate on which the chuck is mounted. These chucks ideal for gripping non-circular cross sections and gripping circular cross sections with extreme precision. Height can be varied while working with different index centres while the angle of inclination can be changed for various machining applications. The tip of centre is finely rotatable. The dead centre of the tail stock should be in line with the centre of the rotary table. Tail stock suitable for 6″ & 4.5/16″ Rotary Table. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a. On a milling machine. Usually used to apply support to the longitudinal. Axis of a work-piece being machined. Centre is mounted in the tail stock, and inserted against the sides of a hole in the centre of the work piece. A tail stock has a Dead. A Tail stock is particularly useful when the work-piece is relatively long and slender. 6.1/4 / 108mm. 3.3/16 / 80mm. The divisions of preset holes are provided for the most common angles such as 30, 45 and 90. The remaining divisions of the circle are provided for manually rotating the dividing arm using the plates. Term & Conditions. The colour of item can be vary depend upon availability. The item “New Rotary Table 6/150mm, 4jaw Indep. Chuck with Back & Dividing Plate Tailstock” is in sale since Monday, March 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Custom Bundle: No
  • Setting Position: Horizontal/Vertical
  • MPN: Does Not Apply
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Operation: Manual
  • Rotary Table: 6”/150mm
  • Weight Of Kit: 21 Kgs / 46.2 Lbs
  • Gear Ratio: 90:1
  • Chuck Size: 100mm
  • Brand: Unbranded

New Rotary Table 6/150mm, 4jaw Indep. Chuck with Back & Dividing Plate Tailstock
4jaw, 6150mm, back, chuck, dividing, indep, plate, rotary, table, tailstock
previous page · next page