rotary
HILTI PR 30-HVS Horizontal Vertical Slope Rotating Rotary Laser Red+PRA30 Remote













Comes with the following. PR30 HVS Rotary Laser. PRA 30 Laser Eye reciever/remote. PRA 83 Laser Eye reciever/remote holder. PRA 84G Li-ion Battery. Aftermarket 12v Battery Charger. PR2-HS Hilti Carrying Case. This machine will produce the following lasers. Horizontal self leveling laser. Sloped self leveling laser. (up to +15% or -8.6%). Sloped self leveling, auto aligning laser- (up to +15% or -8.6%) auto aligned to the grade rod and laser eye placed at 2 different elevations to align. Vertical self-leveling, auto aligning laser. You set the laser close to the left right alignment, then set the laser eye at the other end you want to align to and hit the auto align button on the remote and the machine will adjust to where the laser eye is placed. If the laser is in horizontal or sloped mode and is ever bumped or moved by the wind, the machine pauses, turns the laser beam off, and re-aligns. If it bumped really far that it is out of the slope range for realigning, it will turn off the laser beam and flash an error indicator so you never accidentally rely on a misaligned laser. The laser eye receiver can control the rotary laser machine and also tells you on an LCD screen on the front and back how many inches or mm to go up or down or it makes one type of beep to tell you to go up and another beep to tell you to go down. I have owned Leica, Topcon, Bosch, and several other lasers and this by far has the most features. This laser has all the same features as the Hilti PR30-HVS A-12. The only difference is the A12 has a different battery and the top is shaped differently. The laser and all accessories are fully functional but there are some cosmetic flaws which I will describe below and also include pictures. Rotating laser- The rotating laser had some writing on it which has been scraped off. You can see where is was scraped off (see pictures). The case had some writing on it which has been scraped off. Case- One of the case latches was broken. I have glued it back on and filled the adjacent void with epoxy. The epoxy repair has held up for several months. Case- a corner of the case was broken which could allow dust to enter. It has been repaired with epoxy so dist doesn’t have a place to enter. All items are used and have typical cosmetic scuffs and scratches. The item “HILTI PR 30-HVS Horizontal Vertical Slope Rotating Rotary Laser Red+PRA30 Remote” is in sale since Friday, June 19, 2020. This item is in the category “Business & Industrial\Test, Measurement & Inspection\Levels & Surveying Equipment\Levels & Autolevels\Rotary Lasers”. The seller is “endmeyer007″ and is located in Grantsville, Utah. This item can be shipped worldwide.
- Brand: Hilti
- Beam Color: Red
- Range: 1640 diameter (820 radius)
- Modified Item: No
- Model: PR 30-HVS
- Product: Rotary Laser Level & Laser Detector/Receiver
- Leveling Method: Electronic Auto-Leveling
- Bundle Description: Comes with PR30 HVS Rotary Laser, PRA 30 Laser Eye receiver/remote, Laser Eye holder PRA 83, PRA 84G Li-ion Battery, Aftermarket 12v Battery Charger, Manual, Hilti Carrying Case
- Country/Region of Manufacture: Germany
- Accuracy: +/- 0.03 at 33 feet
- Custom Bundle: Yes
- Number of Beams: 1
- MPN: 2065647

4/100 MM Rotary Table+horizontal Vertical+tailstock+round Vice+50 MM 4 Jaw Self







Description of 4 (100 mm) Rotary Table Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. DETAILS OF ROUND VICE: Made of high grade close grain caste Iron. The moving jaw has V-grooves to hold Round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Supplied with a Suitable Tailstock , Clamp kit & a Chuck with Back Plate & Fixing T nuts CHUCK BODY IS CASTE IRON AND JAWS ARE HARDENED STEEL. The item “4/100 MM ROTARY TABLE+HORIZONTAL VERTICAL+TAILSTOCK+ROUND VICE+50 MM 4 JAW SELF” is in sale since Thursday, May 9, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolswholesale” and is located in Delhi, Delhi. This item can be shipped worldwide.
- MPN: Does Not Apply
- Brand: Unbranded

Phase II HV221-304 4 Horizontal/Vertical Rotary Table


A convenient method of worm adjustment is provided to compensate for wear. Each table is supplied with a signed inspection certificate and an operating certificate. Use for indexing Drilling or milling. Machining curved surfaces by utilizing circular milling. Milling and boring where close tolerances are required. Machining flat surface is Set at a certain angle to a given reference. Adjustable satin chrome dials are extremely large in diameter for easy reading. All dials are Precision ground and graduated in minute and second increments as well as degrees. Totally enclosed rugged base casting Precision ground and parallel within. (2) Locks provided for positive action. The worm and shaft are of one Piece hardened and ground. All rotary tables are equipped with disengageable worms which affords quick rotation for indicating workPieces. Oiling facilities are provided for all moving parts. Made of “high grade meehanite castings”. Precision ground and parallel within. All T-Slots are machined. Graduations are accurately cut in increments of one degree. Dividing plates have all divisions from 2 to 66 and all numbers from 68 to 132 that can be divided by 2 3 and 5. Fits all except 6. Gear ratio: 72:1. Adjustable tailstocks: 2 MT. Rotary Table/Lathe Chuck Adapter Plate Ordering Information Dont know which Adapter plate/lathe chuck to use with your rotary table? 4 Horizontal & Vertical Table. Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution. The item “Phase II HV221-304 4 Horizontal/Vertical Rotary Table” is in sale since Tuesday, March 8, 2016. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Other Metalworking Equipment”. The seller is “traverstoolco” and is located in Duncan, South Carolina. This item can be shipped worldwide.
- Brand: Phase II
- MPN: HV221-304

10hp GA7 Atlas Copco rotary screw air compressor



For sale is a like new Atlas Copco GA7, 10 hp rotary screw air compressor tank mounted that was used as a demo unit. The compressor measures 66″ x 33″ x 72 and weighs 943 lbs. We are an Atlas Copco authorized distributor. Backyard Enterprises is located at 281 Spindale street in Spindale NC. We are an air compressor service company that sells new and used air compressors and related products. We offer installation, routine maintenance and repair services on all brands of air compressors, reciprocating and rotary screw, electric, gas and diesel driver. We offer airend rebuilding services on most major brands of air compressors. Backyard Enterprises is a licensed and insured company that provides warranties on both new and used compressors. Our service area covers most of the Carolinas, Northern Georgia, Eastern Tennessee and Southern Virginia. The item “10hp GA7 Atlas Copco rotary screw air compressor” is in sale since Saturday, September 14, 2019. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Air Compressors & Blowers\Other Air Compressors”. The seller is “backyardent3″ and is located in Rutherfordton, North Carolina. This item can be shipped to United States.
- Power Supply: Electric
- Model: GA7
- Country/Region of Manufacture: Belgium
- Max Power (CFM): 31 – 50
- Capacity: 120 Gallons
- Features: Stationary
- Brand: Atlas Copco
- Orientation: Horizontal
- Motor Horsepower: 10
- Compressor Type: Rotary Screw

16 ROTARY TABLE With T-SLOTS










16 ROTARY TABLE W/ T-SLOTS. Works but needs new dial. The item “16 ROTARY TABLE With T-SLOTS” is in sale since Tuesday, June 2, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “takeitfromablacksmith” and is located in Oakland, California. This item can’t be shipped, the buyer must pick up the item.
- Brand: Unbranded
- Operation: Manual
- Tilting: No
- Setting Position: Horizontal/Vertical
- Cross-Slide: No
- MPN: Does Not Apply

3D 12 Lines Laser Level Kit Self-Leveling 360° Rotary Horizontal Vertical Cross













Cars & Motorcycle Electronics. You may also like. 360 ° Rotating 12 Lines 3D Self-leveling Level 360 Horizontal and Vertical Cross Super Powerful Green Laser Beam Line. The wavelength of 532 nm. 8 lignes verticales, 4 lignes horizontales. This self-leveling professional laser level features 12 lines for accurate alignment and measurement. Automatic mechanism for automatic leveling. Audible warning beyond the automatic upgrade range. 360 ° rotating base with fine adjustment button, quickly identifies the target. The button is waterproof, resistant to wear and feel exquisite, easy to use. Thickened metal base provides stable support and is shockproof, unbreakable. Lead function, precise positioning of the machine. Easy to carry with the plastic boltier and carrying strap, providing fast and convenient mobility and storage. Wide applications for fastening of auxiliary tiles, wall decoration, fixing of floor tiles, stair railings and more. Laser color: green. Material: Aluminum Alloy Chassis + Engineering Plastics. 3D laser leveling: 8 vertical lines, 4 horizontal lines. Laser wavelength :: 532nm. Line output power. Laser class: Class IIIB. Type of damping: magnetic. Upgrade time: =4s. Laser level line width: 1.5mm, 5mm. Accuracy: ± 1mm?? Accuracy: 90 ° ± 30. Leveling range: ± 3 °. Degree of rotation: 360 °. Working distance: Up to 10M inside; up to 30M outdoors. Power supply: 1 x 3000mAh rechargeable lithium battery (built-in). Working time: 4 hours. Operating temperature: 14 to 122. Storage temperature: -4 to 140. 1x Laser level 12 lines green light. 1x Mini Tripod Base. 1x Tripod (40cm-120cm adjustable). 1x Tripod adapter screw. If you do not receive your item after. Please read our terms and conditions above carefully. We are a professional exporter in LED Light, Electronic Products, Digital Products etc, in Hong Kong. Our factory is founded in 2008, outfitted with advanced production equipment, adopted to modern production technology, our products are exported throughout the world. Because of first-class quality, our products are welcomed wonderfully. ” is our service goal, “. Keep promise and honor contract. Is our business principle. Faster, higher and further. Going with these three, we are never satisfied with current results, never stop processional steps, but continue to self-perfect, develop and bring forth new ideas. With these work spirits, our company has made incredible breakthroughs these years. In the modern competitive import and export Trading markets, we are so confident to meet any challenges. We have prepared well, Welcome to your friendly business. We greatly appreciate your. The item “3D 12 Lines Laser Level Kit Self-Leveling 360° Rotary Horizontal Vertical Cross” is in sale since Friday, May 10, 2019. This item is in the category “Home & Garden\Tools & Workshop Equipment\Measuring & Layout Tools\Laser Measuring Tools”. The seller is “greener-store” and is located in Shenzhen. This item can be shipped worldwide.
- Type: Laser rotatif
- Measurement Model: 12 lines
- Material: Metal +Plastic
- Waterproof rating: IP54
- Color: Green
- Laser light source: the wavelength of 532 nm
- Automatic leveling range: ±3 °
- Overall accuracy: ± 1mm/10m
- Classe laser: Classe laser
- Warranty: 3 Years
- Nivellement laser 3D: 8 lignes verticales, 4 lignes horizontales
- Brand: Unbranded
- MPN: Does Not Apply
- Model: Level Laser
- Weight: 3.2KG

6 Rotary Tbale 4 Slot Horizontal & Vertical With M8 Clamping Kit




PRECISION ROTARY TABLE 6/150 MM. WITH M8 CLAMPING KIT. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. T Slot 16 mm. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “6 ROTARY TBALE 4 SLOT HORIZONTAL & VERTICAL WITH M8 CLAMPING KIT” is in sale since Wednesday, December 4, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “zapactools” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- MPN: Does Not Apply
- Brand: Unbranded/Generic

4 / 100 MM Tilting Rotary Table Horizontally & Vertically Picture # 10285


4 / 100 MM TILTING ROTARY TABLE HORIZONTALLY & VERTICALLY PICTURE # 10285. The item “4 / 100 MM TILTING ROTARY TABLE HORIZONTALLY & VERTICALLY PICTURE # 10285″ is in sale since Thursday, April 2, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “houseoftools_2″ and is located in Mentor, Ohio. This item can be shipped to United States.
- Bundle Listing: No
- ROTARY TABLE, LATHE CHUCK: ROTARY TABLE, LATHE CHUCK
- Country//Region of Manufacture: India
- Country/Region of Manufacture: India
- MPN: Does Not Apply
- Brand: Unbranded
- Model: Tilting
- Colour: Black Wrinkle

Hv6 Rotary Table (4 Slot) Horizontal & Vertical (150mm) With M8 Clamping Kit Set




Precision Rotary Table 6/150 mm. With M8 Clamping Kit. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. T Slot 16 mm. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “HV6 ROTARY TABLE (4 SLOT) HORIZONTAL & VERTICAL (150MM) WITH M8 CLAMPING KIT SET” is in sale since Saturday, June 13, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “zealfortools” and is located in DELHI, DELHI. This item can be shipped worldwide.
- ROTARY TABLE, LATHE CHUCK: ROTARY TABLE, LATHE CHUCK
- Colour: Wrinkle Black
- Country/Region of Manufacture: India
- MPN: Does Not Apply
- Brand: SARAL TOOLS
- Model: Rotary Table 6″/150mm With M8 Clamping Kit
- Country//Region of Manufacture: India
