chuck
Rotary Table 4 Inch/100 mm 3 Slot H-V MT2 Bore + MT2 Arbour + 70mm 4 jaw chuck




Rotary Table 4 100mm Horizontal Vertical MT2 Bore Model Milling Machine 70mm Independent Chuck 4 Slots. High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 105 mm. Vertical center height 75 mm. One turn = 5 degrees table graduated 360 degrees. Center Has a MT-2 Taper. Quick Release System for Manual Indexing. And Has 3 Tee Slots. A Precision work positioning device used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Rotary tables are most commonly mounted “flat”, with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it “flat” on a 90° angle plate), so that it rotates about a horizontal axis. In this configuration a tailstock can also be used, thus holding the work piece between centers. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. Milling :Milling curved profiles and angled faces relative to a centre line. Drilling or milling to polar co-ordinates and, when mounted vertically with a tailstock they can be used to machine shafts or spindles. The versatile units can also be used on drilling, boring or slotting machines permitting an even greater range of operations. Machining – To establish the initial work piece position simply loosen the zero Collar locking handle and rotate the zero collar anti-clockwise for about half A turn. The worm is now disconnected from the worm wheel drive, the table is Free to turn independently to the crank handle and the work piece may now be Accurately aligned. To re-engage simply turn the zero collar in the clockwise Direction and re-tighten the locking handle. Rotary table can be used for. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. Product Specifications : Atoz adjustable hand reamers are designed with enough adjustment to ream almost any odd size hole. Blades are made of carbon steel. For long life and can be adjusted by loosening one nut while tightening the other. They are used mostly for repair work in the field. Photo for representation purpose only. May not be as the same as displayed. Please ask for original photos if required. The item “Rotary Table 4 Inch/100 mm 3 Slot H-V MT2 Bore + MT2 Arbour + 70mm 4 jaw chuck” is in sale since Wednesday, June 30, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “atoz-outils” and is located in Bagdad, Kentucky. This item can be shipped to United States.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- Model: RT-4+100MM + 70mm Chuck
- MPN: Does Not Apply
- Brand: Atoz

Rotary Table 4 / 100mm HV Model + 65mm self centering lathe chuck + PLATE ATOZ






Xtra Heavy Model ATOZ. Rotary Table 4 / 100 mm. Precision Rotary Table 4 100mm manufactured for effective work. 4 T Slots for fixing work can be used with Clamping kit. Vertical Height 55 mm when table kept horizontal. Table graduated 0-360 degrees in 5 degree divisions. Supplied complete with a key as well as set of tee nuts and studs to secure it into place. Quality 3 jaw self centering chuck 65mm Diameter with 14x1mm Thread. Contra rotating rapid jaw adjustment mechanism. Backplate is drilled and counterbored to fit a range of 3 and 4 rotary tables with 4 Slots. A Precision work positioning device used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Rotary tables are most commonly mounted “flat”, with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it “flat” on a 90° angle plate), so that it rotates about a horizontal axis. In this configuration a tailstock can also be used, thus holding the work piece between centers. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. Milling :Milling curved profiles and angled faces relative to a centre line. Drilling or milling to polar co-ordinates and, when mounted vertically with a tailstock they can be used to machine shafts or spindles. The versatile units can also be used on drilling, boring or slotting machines permitting an even greater range of operations. Machining – To establish the initial work piece position simply loosen the zero Collar locking handle and rotate the zero collar anti-clockwise for about half A turn. The worm is now disconnected from the worm wheel drive, the table is Free to turn independently to the crank handle and the work piece may now be Accurately aligned. To re-engage simply turn the zero collar in the clockwise Direction and re-tighten the locking handle. Rotary table can be used for. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. Product Specifications : Atoz adjustable hand reamers are designed with enough adjustment to ream almost any odd size hole. Blades are made of carbon steel. For long life and can be adjusted by loosening one nut while tightening the other. They are used mostly for repair work in the field. Photo for representation purpose only. May not be as the same as displayed. Please ask for original photos if required. The item “Rotary Table 4 / 100mm HV Model + 65mm self centering lathe chuck + PLATE ATOZ” is in sale since Wednesday, June 30, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “atoz-outils” and is located in Bagdad, Kentucky. This item can be shipped to United States.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- Model: RT-4+80MM
- MPN: Does Not Apply
- Brand: Atoz

8 HORIZONTAL & VERTICAL ROTARY TABLE w. Adapter & 6 4-jaw chuck, #IN-TSL8-C6







8 PRECISION ROTARY TABLE HORIZONTAL/VERTICAL w. 6 4 jaw self-centering chuck top&bottom reversible jaws, and base centering adapter plate. The mounting T-nuts and 7 screws are included. DUAL POSITIVE ACTION LOCKS. 10 SECONDS VERNIER READING. GEAR DRIVE IMMERSED IN OIL. The item “8 HORIZONTAL & VERTICAL ROTARY TABLE w. Adapter & 6 4-jaw chuck, #IN-TSL8-C6″ is in sale since Monday, June 28, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “niuniucme” and is located in Madison Heights, Michigan. This item can be shipped to United States.
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Brand: CME

Rotary Table Horizontal & Vertical 3 Ratio 381 4 T slots Table + 65 mm Chuck



Quality Made Compact Rotary Table! Rotary Table Horizontal & Vertical 3 / 75 mm with 65mm Lathe Chuck for Milling Machine. Precision 3 / 75mm Horizontal & Vertical Rotary Table supplied with Mounting Back Plate and 65mm 3 Jaw. Self centering Lathe chuck. 3 Inch Rotary Table Horizontal And Vertical. Table graduated 360 degrees, Nice smooth rotation. Vertical center height 44 mm, in 4 Slots. Regular 80 mm horizontal/ vertical Rotary Table complete. One turn = 10 degrees. Supplied with 65 mm Self Centering Chuck & 80 mm Back-plate. Contra rotating rapid jaw adjustment mechanism. Quality 3 jaw self centering chuck 65 mm Diameter. Supplied complete with a key as well as set of tee nuts and Allen Screws to secure it into place. Back-plate is drilled and counter-bored to fit a range of 3 and 4 Inch rotary tables with 3 Slots or a 4 Slots. Back-plate Threaded: 14 x 1. 65 MM Chuck Threaded 14 x1. The item “Rotary Table Horizontal & Vertical 3 Ratio 381 4 T slots Table + 65 mm Chuck” is in sale since Friday, January 8, 2021. This item is in the category “Business & Industrial\Other Business & Industrial”. The seller is “protechniques” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Tilting: No
- Rotary Table Size: 3 in
- Chuck Size: 65 mm
- Slots: 4
- Jaws: 3
- Backplate Threaded: 14 x 1
- Operation: Manual
- MPN: RTCH3
- Cross-Slide: No
- Brand: Continental Machinery

8 HORIZONTAL & VERTICAL ROTARY TABLE w. Adapter & 6 6-jaw chuck, #IN-TSL8-C6







8 PRECISION ROTARY TABLE HORIZONTAL/VERTICAL w. 6 6 jaw self-centering chuck top&bottom reversible jaws, and base centering adapter plate. The mounting T-nuts and 7 screws are included. DUAL POSITIVE ACTION LOCKS. 10 SECONDS VERNIER READING. GEAR DRIVE IMMERSED IN OIL. The item “8 HORIZONTAL & VERTICAL ROTARY TABLE w. Adapter & 6 6-jaw chuck, #IN-TSL8-C6″ is in sale since Monday, June 28, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “niuniucme” and is located in Madison Heights, Michigan. This item can be shipped to United States.
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Brand: CME

Rotary Table Horizontal & Vertical 3 75mm with65mm Lathe Chuck With Back Plate



Rotary Table Horizontal & Vertical 3 / 75mm with 65mm Lathe Chuck for Milling Machine. ROTARY TABLE 3/75mm. High Precision Quality Made Low Profile Rotary Table. Table Height With Chuck : 95mm. Worm Gear has 36:1 ratio. The hand wheel is in 10 min division and can be set at 0. LATHE CHUCK SELF CENTERING 65MM – 3 JAW. Mounts Smoothly over Backplate (Provided). Comes with Suitable T Nuts & Bolts. This Whole Unit can be Assembled & Disassembled Easily to use Either Rotary Table or Chuck Separately. The item “Rotary Table Horizontal & Vertical 3 75mm with65mm Lathe Chuck With Back Plate” is in sale since Friday, February 15, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “daily_tools” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Country of Manufacture: India
- MPN: Does Not Apply
- Brand: FACTORYTOOLS

Rotary Table 4/100mm With 65mm Mini Scroll Lathe Chuck & Backplate




Rotary Table Horizontal & Vertical 4 / 100 mm with. 65 mm Lathe Chuck & Back plate for Milling Machine. Vertical center Height : 2-1/16 (Approx 51 mm). Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. Calibrated in 5 Min Increment around the rim. Can be used both Vertical & Horizontal. The item “ROTARY TABLE 4/100MM WITH 65MM MINI SCROLL LATHE CHUCK & BACKPLATE” is in sale since Sunday, June 6, 2021. This item is in the category “Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “expert.tools” and is located in ROHINI, SECTOR 7. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Tilting: No
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: RUTWIK ENGINEERS

Rotary Table Horizontal & Vertical 4 / 100 mm with 80 mm Lathe Chuck & BackPla



Rotary Table Horizontal & Vertical 4 / 100 mm with. 80 mm Lathe Chuck & BackPlate for Milling Machine. Rotary Table has 4 Tee Slots. Chuck Diameter : 100 mm / 4. Vertical center Height : 2-1/16 (Approx 51 mm). Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. Calibrated in 5 Min Increment around the rim. Can be used both Vertical & Horizontal. This set includes 80 mm Self Centering Chuck with Backplate and mounting T-Nuts and Bolts. The item “Rotary Table Horizontal & Vertical 4 / 100 mm with 80 mm Lathe Chuck & BackPla” is in sale since Friday, June 4, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolsforexperts” and is located in Delhi. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Brand: Unbranded

Bison Horizontal/vertical Super Spacer Rotary Indexer 8 3 Jaw Chuck Clean













BISON 8 HORIZONTAL/VERTICAL SUPER SPACER ROTARY INDEXER/Key. Quality Products at Lowest Prices. The item “BISON HORIZONTAL/VERTICAL SUPER SPACER ROTARY INDEXER 8 3 JAW CHUCK CLEAN” is in sale since Sunday, June 20, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “strongarmtooling” and is located in North Chelmsford, Massachusetts. This item can be shipped to United States.
- Setting Position: Horizontal/Vertical
- MPN: 3575-8″
- Brand: Bison

BISON HORIZONTAL/VERTICAL SUPER SPACER ROTARY INDEXER 8 3 JAW CHUCK WithTAILSTOCK











BISON HORIZONTAL/VERTICAL SUPER SPACER ROTARY INDEXER 8″ 3 JAW CHUCK W/TAILSTOCK; Pristine condition with 8″ Bison 3-Jaw Chuck and matching Yuasa (Japan) Adjustable Tailstock also in pristine condition. The item “BISON HORIZONTAL/VERTICAL SUPER SPACER ROTARY INDEXER 8 3 JAW CHUCK WithTAILSTOCK” is in sale since Thursday, June 10, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “muke2000″ and is located in Lebanon, New Jersey. This item can be shipped to United States.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: 5820-125
- Brand: Bison
