chuck
ROTARY TABLE 4 with 100MM SELF CENTERING 3 JAW CHUCK WITH BACKPLATE
Rotary Table 4″ with 100 mm Self-Centering Chuck & Backplate Rotary Table 4″. Our 4 (100 mm) Rotary Table is Designed for smaller milling machines. Table diameter 100 mm. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. 100 mm Self Centering Chuck & Back plate. A high Quality 100 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate & fixing tee nuts with screws. (though the picture is not showing the same). Designed to fit our 3 or 4 Rotary table with either 3 or 4 slots. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play. The item “ROTARY TABLE 4 with 100MM SELF CENTERING 3 JAW CHUCK WITH BACKPLATE” is in sale since Wednesday, January 15, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “easystreet_hangout” and is located in DASNA, UTTAR PRADESH. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Tilting: No
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Unbranded
New Rotary Table 4/100mm Tilting 80mm 3Jaw Chuck Back Plate, Tail Stock &Clamps
Integrates of Rotary Kit. Rotary Table with Tilting 4/100 mm. 2 3Jaw Chuck with Back Plate 80mm. Weight :- 10 Kgs / 22 Lbs. Table Dia:- 4/100 MM. Tee Slot:- M 6. Gear Ratio :- 36:1. Rotary Table Tilting Type 4/100 mm has a gear ratio of 36:1 suitable for working horizontally and vertically. Can be set on an angle for holding precision jobs. Angular marking is very precise making working easy. Rotary Table Uses. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. Height can be varied while working with different index centers while the angle of inclination can be changed for various machining applications. The tip of center is finely rotatable. The dead center of the tail stock should be in line with the center of the rotary table. Tail stock suitable f or 3″ & 4″ Rotary Table. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a rotary. On a milling machine. Usually used to apply support to the longitudinal rotary. Axis of a work-piece being machined. Center is mounted in the tail stock, and inserted against the sides of a hole in the center of the work-piece. A tail stock has a Dead center, while. A Tail stock is particularly useful when the work-piece is relatively long and slender. 3.3/8 / 85mm. 1.1/2 / 38mm. The 3 jaw chuck has a big range clamping. The chuck has 3 reversible jaws. There is a fixture plate on which the chuck is mounted. These chucks ideal for gripping non-circular cross sections and gripping circular cross sections with extreme precision. The color of item can be vary depend upon availability. The item “New Rotary Table 4/100mm Tilting 80mm 3Jaw Chuck Back Plate, Tail Stock &Clamps” is in sale since Wednesday, March 20, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Tilting: Yes
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Tee Slot: M 6
- Modified Item: No
- Country/Region of Manufacture: India
- Weight of Kit: 10 Kgs / 22 Lbs
- Centre Height Min:: 3.3/8″ / 85mm
- Operation: Manual
- Rotary Table: 4”/100mm
- Gear Ratio: 36:1
- Chuck Size: 80mm
- Brand: Unbranded
- Cross-Slide: Yes
- Centre Height Max:: 1.1/2″ / 38mm
New Rotary Table 4.5/16/100 mm, 4 Jaw Independent Chuck with Back & Divide Plate
Integrates of Rotary Kit. Rotary Table 4.5/16/110 mm. 2 4 Jaw Chuck independent chuck with Back Plate 80mm. Weight of Kit :- 17 Kgs / 37.4 Lbs. Gear Ratio:- 90:1. Made of ductile cast iron and precision ground The worktable is graduated to a full 360° MT 2 centre for holding work pieces worm gear ration is 90:1 making one turn of the handle move the table 4° vernier scale makes setting down to 10 secs possible quick release system for manual indexing. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws and. Jaw can be moved independently. There is a fixture plate on which the chuck is mounted. These chucks ideal for gripping non-circular cross sections and gripping circular cross sections with extreme precision. Height can be varied while working with different index centres while the angle of inclination can be changed for various machining applications. The tip of centre is finely rotatable. The dead centre of the tail stock should be in line with the centre of the rotary table. Tail stock suitable for 6″ & 4.5/16″ Rotary Table. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a. On a milling machine. Usually used to apply support to the longitudinal. Axis of a work-piece being machined. Is mounted in the tail stock, and inserted against the sides of a hole in the centre of the work-piece. A tail stock has a Dead centre , while. A Tail stock is particularly useful when the work-piece is relatively long and slender. 6.1/4 / 108mm. 3.3/16 / 80mm. He divisions of preset holes are provided for the most common angles such as 30, 45 and 90. The remaining divisions of the circle are provided for manually rotating the dividing arm using the plates. The colour of item can be vary depend upon availability. The item “New Rotary Table 4.5/16/100 mm, 4 Jaw Independent Chuck with Back & Divide Plate” is in sale since Monday, March 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Country/Region of Manufacture: India
- Weight of Kit: 17 Kgs / 37.4 Lbs
- Operation: Manual
- Rotary Table: 4.5/16” /110mm
- Gear Ratio: 90:1
- Chuck Size: 80mm
- Brand: Unbranded
New Rotary Table 8/200mm, Dividing Plates, Tail Stock, 4Jaw Chuck Indepd. & Clamps
Integrates of Rotary Kit. Rotary Table 8/200 mm. 4 Jaw Chuck independent chuck with Back Plate 125mm. Weight of Kit :- 48 Kgs / 105.6 Lbs. Made of ductile cast iron and precision ground The worktable is graduated to a full 360° MT 3 center for holding work pieces worm gear ration is 90:1 making one turn of the handle move the table 4° vernier scale makes setting down to 10 secs possible quick release system for manual indexing. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws and. Jaw can be moved independently. There is a fixture plate on which the chuck is mounted. These chucks ideal for gripping non-circular cross sections and gripping circular cross sections with extreme precision. Height can be varied while working with different index centers while the angle of inclination can be changed for various machining applications. The tip of center is finely rotatable. The dead center of the tail stock should be in line with the center of the rotary table. Tail stock suitable for 8″ /200mm” Rotary Table. 8 / 200mm. 4.3/4 / 120mm. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a rotary table. Usually used to apply support to the longitudinal Ro. Axis of a work-piece being machined. Is mounted in the tail stock, and inserted against the sides of a hole in the center of the work-piece. A tail stock has a Dead center. Head Stock has Live Center. A Tail stock is particularly useful when the work-piece is relatively long and slender. The divisions of preset holes are provided for the most common angles such as 30, 45 and 90. The remaining divisions of the circle are provided for manually rotating the dividing arm using the plates. Term & Conditions. The color of item can be vary depend upon availability. The item “New Rotary Table 8/200mm, Dividing Plates, Tail Stock, 4Jaw Chuck Indepd. & Clamps” is in sale since Monday, March 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Country/Region of Manufacture: India
- Operation: Manual
- Weight Of Kit: 48 Kgs / 105.6 Lbs
- Brand: Unbranded
New Rotary Table 6/150mm, 4jaw Indep. Chuck with Back & Dividing Plate Tailstock
Integrates of Rotary Kit. Rotary Table 6/150 mm. 2 4 Jaw Chuck Independent chuck with Back Plate 100mm. Weight of Kit :- 21 Kgs / 46.2 Lbs. Gear Ratio:- 90:1. Made of ductile cast iron and precision ground The worktable is graduated to a full 360° MT 2 centre for holding work pieces worm gear ration is 90:1 making one turn of the handle move the table 4° vernier scale makes setting down to 10 secs possible quick release system for manual indexing. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws and. Jaw can be moved independently. There is a fixture plate on which the chuck is mounted. These chucks ideal for gripping non-circular cross sections and gripping circular cross sections with extreme precision. Height can be varied while working with different index centres while the angle of inclination can be changed for various machining applications. The tip of centre is finely rotatable. The dead centre of the tail stock should be in line with the centre of the rotary table. Tail stock suitable for 6″ & 4.5/16″ Rotary Table. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a. On a milling machine. Usually used to apply support to the longitudinal. Axis of a work-piece being machined. Centre is mounted in the tail stock, and inserted against the sides of a hole in the centre of the work piece. A tail stock has a Dead. A Tail stock is particularly useful when the work-piece is relatively long and slender. 6.1/4 / 108mm. 3.3/16 / 80mm. The divisions of preset holes are provided for the most common angles such as 30, 45 and 90. The remaining divisions of the circle are provided for manually rotating the dividing arm using the plates. Term & Conditions. The colour of item can be vary depend upon availability. The item “New Rotary Table 6/150mm, 4jaw Indep. Chuck with Back & Dividing Plate Tailstock” is in sale since Monday, March 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Country/Region of Manufacture: India
- Operation: Manual
- Rotary Table: 6”/150mm
- Weight Of Kit: 21 Kgs / 46.2 Lbs
- Gear Ratio: 90:1
- Chuck Size: 100mm
- Brand: Unbranded
Hv6/150mm Rotary Table(4 Slot) With 150mm Independent Chuck & Diving Plate Set
HV6 Rotary Table with Dividing Plate Set &. 150mm 4 Jaw Independent Chuck. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. T Slot 16 mm. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. 150 mm Independent Chuck & Backplate. A high Quality 4 Jaw Independent chuck, the body of chuck is made from SG Iron & Jaws are of Tool steel hardened & ground. Same Jaws are reversible as well. The item “HV6/150MM ROTARY TABLE(4 SLOT) WITH 150MM INDEPENDENT CHUCK & DIVING PLATE SET” is in sale since Tuesday, June 16, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “expert.tools” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Tilting: No
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: RUTWIK ENGINEERS
Rotary Axis Rotary Chuck Rotating Shaft with Driver for Laser Marking Machine
Rotary Axis Rotary Chuck Rotating Shaft with Driver for Laser Marking Machine. This rotary device is used with our fiber laser marking machine. It fits our machine well. Any questions, please feel free to leave me a message. I will reply you within 24 hours. Track Page Views With. Auctiva’s FREE Counter. The item “Rotary Axis Rotary Chuck Rotating Shaft with Driver for Laser Marking Machine” is in sale since Tuesday, January 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “sfx-portable-edm” and is located in Luoyang, Henan. This item can be shipped worldwide.
- Brand: SFX
- MPN: Does Not Apply
- Operation: Manual
- Setting Position: Horizontal/Vertical
New Rotary Table 4/100 mm kit 4Jaw Chuck with Back Plate Tail Stock &Clamps Set
Integrates of Rotary Kit. Rotary Table 4/100 mm. 2 4 Jaw Chuck with Back Plate 80 mm. Weight of Kit :- 9 Kgs / 19.8 Lbs. Chuck Size :- 80 mm. 3.3/8 / 85 mm. 1.1/2 / 38 mm. Precision ground horizontally and vertically. Graded cast iron and precision ground. The work table is graduated to full 360 degrees. Gear Ratio 36:1. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws. There is a fixture plate on which the chuck is mounted. Height can be varied while working with different index centers while the angle of inclination can be changed for various machining applications. The tip of center is finely rotatable. The dead center of the tail stock should be in line with the center of the rotary table. Tail stock suitable for 4″ /100 mm” Rotary Table. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a rotary table. On a milling machine. Usually used to apply support to the longitudinal Ro. Axis of a work piece being machined. Is mounted in the tail stock, and inserted against the sides of a hole in the center of the work piece. A tail stock has a Dead Center, while. A Tail stock is particularly useful when the work piece is relatively long and slender. Term & Conditions. The colour of item can be vary depend upon availability. The item “New Rotary Table 4/100 mm kit 4Jaw Chuck with Back Plate Tail Stock &Clamps Set” is in sale since Friday, March 29, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Country/Region of Manufacture: India
- Weight of Kit: 9 Kgs / 19.8 Lbs
- Operation: Manual
- Chuck Size: 80 MM
- Brand: Unbranded
Tilting Rotary Table 3/80mm With 50mm Mini Lathe Chuck & Backplate
ROTARY TABLE 3 TILTING + BACK PLATE + 50 MM CHUCK. 3 / 75 mm Tilting Rotary table. Of a back plate which has holes in a manner that it can be fitted on to a 3 slot as well 4 slot Rotary table. Of a 50 mm 3 Jaw self centering Chuck and 3 set of T nut to clamp the Back Plate with the Tee slots of the Rotary Table. High Precision Mini Rotary Table tilting type 75 mm (3 Inches). Overall Height is a non tilting position is around 55 mm. Table is graduated 0- 360 degrees in 5 degree divisions. Rotating handle is graduated 0- 10 degrees in 5 minutes divisions. Table can tilt upto any position 0 to 90 degrees and locked at any position as per the requirement. It is having gunmetal gear and EN8 (form of steel) worm combination to have a minimum wear and tear to give a long life with negligible play to the product. Minimum possible friction means long life and best performance! The item “TILTING ROTARY TABLE 3/80MM WITH 50MM MINI LATHE CHUCK & BACKPLATE” is in sale since Tuesday, June 16, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “expert.tools” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: Yes
- Rotary Table Size: 3 Inch
- Chuck Size: 50 mm
- Slots: 4
- Jaws: 3
- Backplate Threaded: 12 x 1
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: RUTWIK ENGINEERS
New Tilting Rotary Table 4/100 mm kit 3 jaw Chuck with Back Plate Clamping set
Integrates of Rotary Kit. Rotary Table 4/100 mm. 2 3 Jaw Chuck with Back Plate 80 mm. Weight of Kit :- 8 Kgs / 17.6 Lbs. Chuck Size :- 80 mm. Precision ground horizontally and vertically. Graded cast iron and precision ground. The work table is graduated to full 360°. Gear Ratio 36:1. Tilting type Rotary table can be used angular setting. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 3 jaw chuck has a big range clamping. The chuck has 3 reversible jaws. There is a fixture plate on which the chuck is mounted. The colour of item can be vary depend upon availability. The item “New Tilting Rotary Table 4/100 mm kit 3 jaw Chuck with Back Plate Clamping set” is in sale since Friday, March 29, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
- Tilting: Yes
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Country/Region of Manufacture: India
- Weight of Kit: 8 Kgs/ 17.6 Lbs
- Operation: Manual
- Brand: Unbranded
- Cross-Slide: Yes