chuck
Mattison Vertical Rotary Surface Grinder Model 24-42 42 Chuck













MATTISON VERTICAL ROTARY SURFACE GRINDER MODEL 24-42 S/N 24-536 NEW 1972 42 CHUCK 24 SEGMENTED WHEEL 100 HP 440VOLTS DRY BASE EXTERNAL COOLANT SYSTEM WHEEL DRESSER ½ CHUCK LIFE Check out our other items. We will load on a flatbed trailer unless otherwise noted. The item “MATTISON VERTICAL ROTARY SURFACE GRINDER MODEL 24-42 42 CHUCK” is in sale since Tuesday, April 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Grinding Machines”. The seller is “hardy-machinery” and is located in Huntsville, Alabama. This item can’t be shipped, the buyer must pick up the item.
- Model: 24-42
- Country/Region of Manufacture: United States
- Machine Type: Surface Grinder
- Power Source: Electric
- Function: Grinding
- Chuck Size: 42 in
- Brand: Mattison
- Control Type: Automatic
- Spindle: Horizontal
- Control: Automatic

3 Inch Rotary Table 4 Slots with 65mm Lathe Chuck & M6 Clamping kit


3 Inch Rotary Table 4 Slots with 65mm Lathe Chuck & M6 Clamping kit. Height – 38 mm. Ratio – 38:1. Gear mesh adjustment, the zero dial is marked in 10 min. Table scale is calibrated in 5 degree increments. Supplied with 3 rotary table, 65 mm chuck. The Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “3 Inch Rotary Table 4 Slots with 65mm Lathe Chuck & M6 Clamping kit” is in sale since Friday, August 30, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “loyaltoolsinc” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Unbranded

Rotary Table 80 mm 3 in 4 Slot With 50 mm Mini Lathe Chuck And Rotary Vice 80 mm





Rotary Table 3 Inch with 50 mm Chuck. 3 Rotary Table Horizontal & Vertical. Table graduated 360 degrees, Nice smooth rotation. Vertical centre height 44 mm, in 4 Slots. Regular 80 mm horizontal/ vertical Rotary Table complete. One turn = 10 degrees. Supplied with 50 mm Self Centering Chuck & 80 mm Backplate. Contra rotating rapid jaw adjustment mechanism. Quality 3 jaw self centering chuck 50 mm Diameter. Supplied complete with a key as well as set of tee nuts and studs to secure it into place. Backplate is drilled and counterbored to fit a range of 3 and 4 rotary tables with 3 Slots or a 4 Slots. Backplate Threaded: 12 x 1. Rotary Vice 3 Inch. Made from High Grade Casting. For Rotary Table & Vertical Slide. Fits To 3 And 4 Inch Rotary Table. 54 mm Wide Jaw / 20 mm Depth / 30 mm Opening / 30 mm Height. To Hold Round Objects jaws has V-Grooves. Comes Complete With Clamping Nuts. The item “Rotary Table 80 mm 3 in 4 Slot With 50 mm Mini Lathe Chuck And Rotary Vice 80 mm” is in sale since Saturday, February 15, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “machinetoolsindia” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Tilting: No
- Backplate Thread: 12 x 1
- Backplate Size: 80 mm
- No. of Slots: 4
- No. of Jaws: 3
- Table graduated: 360 degrees
- One turn: 10 degrees
- Bundle Listing: No
- Table Graduates: 360 Degree
- Chuck Type: Self Centering Chuck
- Operation: Manual
- MPN: RTRVMC80
- Chuck Soze: 50 mm
- Model: Regular 3 in
- Cross-Slide: No
- Brand: European Machinery

Rotary Table 4/ 100mm Horizontal and Vertical & 65mm 3 Jaw Chuck free shipping






Rotary Table 4/ 100. Table Dia:- 4/100mm. T-Slot :- M 6. Gear Ratio:- 36:1. Weight :- 5 Kgs / 13.2 Lbs. Precision ground horizontally and vertically. Graded cast iron and precision ground. The work table is graduated to full 360°. The 3 jaw chuck has a big range clamping. Uses of Rotary Table. A rotary table is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed (usually horizontal or vertical) axis. A rotary table can be used, To drill equidistant holes on a circular flange, To cut a round piece with a protruding tang, create large-diameter holes, via milling in a circular toolpath, on small milling machines, to cut straight lines & cut arcs at any angle. To hold onto a tool or work piece. Because they most often have three jaws, the term three-jaw chuck without other qualification is understood by machinists to mean a self-centering three-jaw chuck. The term universal chuck also refers to this type. These chucks are best suited to grip circular or hexagonal cross-sections when very fast, reasonably accurate & centering is desired. Self-centering three-jaw chuck and key with one jaw removed and inverted showing the teeth that engage in the scroll plate. The scroll plate is rotated within the chuck body by the key, the scroll engages the teeth on the underside of the jaws which moves the three jaws in unison, to tighten or release the workpiece. Term & Conditions. Of item can be vary depend upon availability. Mm Horizontal and Vertical + 65mm 3 Jaw Chuck. The item “Rotary Table 4/ 100mm Horizontal and Vertical & 65mm 3 Jaw Chuck free shipping” is in sale since Tuesday, February 4, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “easystreet_hangout” and is located in DASNA, UTTAR PRADESH. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal
- Tilting: No
- Chuck Size:: 80mm
- Table Dia:: 100mm
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Unbranded

ROTARY TABLE 3-4 slots with 2.1/2 SELF CENTRING CHUCK HORIZONTAL VERTICAL



3- 75 MM. HIGH QUALITY ITEM Precision 3 Tilting Rotary Table supplied with Mounting Back Plate and 65 mm 3 Jaw Self centering Lathe chuck. The Rotary Table can be tilting up to 90 degrees. Precision Mini Rotary Table 3 75 mm is manufactured from Seasoned casting. Precisely maintained Chuck Run Out and Bottom Surface for accurate work. Table graduated 0-360 degrees in 5 degree divisions. Winding handle is graduated 0-10 degrees in 5 minute divisions. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. Drilling or milling to polar co-ordinates and, when mounted vertically with a tail stock they can be used to machine shafts or spindles. The versatile units can also be used on drilling, boring or slotting machines permitting an even greater range of operations. Machining – To establish the initial work piece position simply loosen the zero Collar locking handle and rotate the zero collar anti-clockwise for about half A turn. The worm is now disconnected from the worm wheel drive, the table is Free to turn independently to the crank handle and the work piece may now be Accurately aligned. To re-engage simply turn the zero collar in the clockwise Direction and re-tighten the locking handle. A rotary table can be used. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. TERMS & CONDITIONS. All our items are delivered to your doorstep. All items will reach you within 8 to 12 days, in most cases we have seen our customers receiving them within a week. We will try our level best to serve you excellent. We are a upcoming online retailer for Engineering Tools, Machine Tools Accessories, Cutting Tools, Measuring Instruments, Diamond Tools, etc. We have wide range of Engineering Supplies and We also make Tools as per specifications. We are here to serve you 24 x 7. The Items we supply are Quality and at low rates as we are manufacturing most of the items. The item “ROTARY TABLE 3-4 slots with 2.1/2 SELF CENTRING CHUCK HORIZONTAL VERTICAL” is in sale since Tuesday, May 12, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “quickfox_1820″ and is located in DELHI, DELHI. This item can be shipped worldwide.
- Brand: DUSHKA
- MPN: RT-3-75
- Model: RT-3-75TLT
- Country of Manufacture: India
- Country/Region of Manufacture: India

Horizontal Vertical Milling Indexing 4/100 Rotary Table & Small Chuck 65mm 3jaw





Description of 4 (100 mm) Rotary Table Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx) excluding chuck. Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. Description of the 65 mm 3 jaws self centering Chuck made from High Quality chuck, the body of which is made from SG Iron & Jaws are of Tool steel hardened & ground. Supplied with a mounting back plate & fixing tee nuts with screws. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table. The item “HORIZONTAL VERTICAL MILLING INDEXING 4/100 ROTARY TABLE & SMALL CHUCK 65MM 3JAW” is in sale since Thursday, May 9, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Chucks\Drill Chucks”. The seller is “toolswholesale” and is located in Delhi, Delhi. This item can be shipped worldwide.
- MPN: Does Not Apply
- Brand: Unbranded

Rotary Table 4 Tilting 4slot + 65 Mm Self Centering Chuck +Back plate & 2 Tnuts




Rotary Table 4 Tilting. Hor/vert Rotary Table 4. Table height 66 mm in flat position. Table graduated 360 degrees in 5 degree divisions. Base is 145 mm x 126 mm with two 10 mm mounting holes separated by 110 mm. The table tilts upto 90 degrees and can be used. 65 mm Self Centering Chuck with 65mm Backplate. Our Chuck is Hardened and ground working surfaces prolong life while ensuring continuous accuracy and repeatability. Both sides of the jaw teeth and guides are ground and hardened to HRC 58-62. Each set of jaws are serialised in their own set. Supplied with 80mm Backplate suitable for 65 mm self centering chuck. The item “Rotary Table 4 Tilting 4slot + 65 Mm Self Centering Chuck +Back plate & 2 Tnuts” is in sale since Tuesday, July 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial-tools” and is located in Jhilmil Industrial Area Delhi. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: Yes
- MPN: Does Not Apply
- Brand: Unbranded

Vintage Horizontal/Vertical 8 Super Spacer Rotary Indexer with Chuck CLEAN












Vintage Horizontal/Vertical Indexing Super Spacer w/ 8 Chuck – CLEAN, NO ISSUES. Fully functional, smooth and ready to use. Hand wheel worm gear ration is 1:90. 24 notch master plate. Questions too close item ending time may not get answered before the item closes. The item “Vintage Horizontal/Vertical 8 Super Spacer Rotary Indexer with Chuck CLEAN” is in sale since Wednesday, April 1, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “depot-supply” and is located in Decatur, Georgia. This item can’t be shipped, the buyer must pick up the item.
- Operation: Manual
- Setting Position: Horizontal/Vertical

ROTARY TABLE 4/100mm WITH 80mm 3 JAW SELF CENTERING CHUCK & M6 CLAMPING KIT





Rotary Table Horizontal & Vertical 4 / 100 mm with. 80 mm Lathe Chuck & BackPlate for Milling Machine. Rotary Table has 4 Tee Slots. Chuck Diameter : 100 mm / 4. Vertical center Height : 2-1/16 (Approx 51 mm). Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. Calibrated in 5 Min Increment around the rim. Can be used both Vertical & Horizontal. This set includes 80 mm Self Centering Chuck with Backplate and mounting T-Nuts and Bolts. CLAMPING KIT M 6. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “ROTARY TABLE 4/100mm WITH 80mm 3 JAW SELF CENTERING CHUCK & M6 CLAMPING KIT” is in sale since Wednesday, July 1, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolsforexperts” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded

Rotary Table 4/100 MM With 65 MM 4 Jaw Independent Chuck & Backplate






ROTARY TABLE 4 +65MM INDEPENDENT CHUCK+BACKPLATE. Our 4 (100 mm) Rotary Table is Designed for smaller milling machines. Table diameter 100 mm. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx). Hand wheel is graduated in divisions of 10min & can be set to zero. Can be mounted both in Horizontal & vertical position. A high Quality 4 Jaw Independent chuck, the body of chuck is made from SG Iron & Jaws are of Tool steel hardened & ground. Same Jaws are reversible as well. Supplied with a mounting back plate & fixing tee nuts with screws. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The chuck mounting is Thread M14 x 1. The item “ROTARY TABLE 4/100 MM WITH 65 MM 4 JAW INDEPENDENT CHUCK & BACKPLATE” is in sale since Wednesday, January 15, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “easystreet_hangout” and is located in DASNA, UTTAR PRADESH. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Tilting: No
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Unbranded
