horizontal
Rdg 4 / 100mm 4 Slot Rotary Table Horizontal / Vertical With 4 Jaw Aed Chuck
4 / 100MM ROTARY TABLE. VERTICAL CENTRE HEIGHT 53MM. TABLE GRADUATED 0-360 DEGREES. COMES WITH 100MM 4 JAW SELF CENTERING AED LATHE CHUCK. COMES BOTH INTERNAL AND EXTERNAL JAWS, CHUCK KEY AND FIXING BOLTS. The item “RDG 4 / 100MM 4 SLOT ROTARY TABLE HORIZONTAL / VERTICAL WITH 4 JAW AED CHUCK” is in sale since Thursday, January 28, 2021. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “rdg355″ and is located in HEBDEN BRIDGE WEST YORKSHIRE. This item can be shipped worldwide.
- Machine Type: Precision Lathe
- MPN: Does Not Apply
- Treated Material: Steel
- Brand: RDGTools HBM Myford
- Control: Manual
8 Nikken 3 Jaw Horizontal / Vertical Rotary Table Ybm #10713
8 NIKKEN 3 JAW MODEL #RSI-10 HORIZONTAL / VERTICAL ROTARY TABLE: YBM #10713. 3 JAW 2 BASES………….. The item “8 NIKKEN 3 JAW HORIZONTAL / VERTICAL ROTARY TABLE YBM #10713″ is in sale since Friday, October 30, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “yoderbrothers” and is located in Toledo, Ohio. This item can be shipped to United States.
- Brand: Nikken
- MPN: Does Not Apply
- Setting Position: Horizontal/Vertical
4 HORIZONTAL & VERTICAL PRECISION ROTARY TABLE, Part#TSL100- NEW demo unit
Estate item, as shown. I think this was unused beyond inspection. The box is marked “new factory” so I think it was a sample sent over from China from a new factory. Table is called “4 inch”, measures about 4 1/2 inch. The information below is from the internet. Packed in original wooden factory box. The included instruction sheet starts with the next size up (TSL150). This has sat on a shelf for a long time, there is some light surface rust where the protective oil had been wiped off. RECISION ROTARY TABLE /HORIZONTAL&VERTICAL – NEW. Graduated 360 degree around its circumference and driven by precision gear with 1:90 reduction ratio. One turn by handle moves table 4 degrees. DUAL POSITIVE ACTION LOCKS. 10 SECONDS VERNIER READING. GEAR DRIVE IMMERSED IN IOL. OPTIONAL DRIVING PLATES AND TAILSTOCK. Check out my other items. The item “4 HORIZONTAL & VERTICAL PRECISION ROTARY TABLE, Part#TSL100- NEW demo unit” is in sale since Wednesday, December 23, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “william_b_noble” and is located in Santa Monica, California. This item can be shipped to United States.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: TSL-100
- Brand: CME
Mini Rotary Table 4 Inch 100mm Horizontal & Vertical Model Milling Machine
Rotary tables are most commonly mounted “flat”, with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it “flat” on a 90° angle plate), so that it rotates about a horizontal axis. In this configuration a tailstock can also be used, thus holding the work piece between centers. ” SIZE: 4 inch ROTARY TABLE- CHUCK DIAMETER 4 inch-100 mm HORIZONTAL / VERTICAL 2-1/16″ (approx 51mm) CENTRE HIGHT IN VERTICAL POSITION UNIT HORIZONTAL ONLY 2- 1/16 inch (approx 51mm) TABLE CALIBRATED 0-360 DEGREES TABLE 36-1 RATIO Weight:3670gms Approximate. The item “Mini Rotary Table 4 Inch 100mm Horizontal & Vertical Model Milling Machine” is in sale since Tuesday, January 12, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “machinetoolsindia” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Model Year: 2020
- MPN: MRT
- Brand: MTI
Rotary Table 4 Inch/100 mm Horizontal Vertical For Milling Premium Quality
Rotary Table 4 100mm Horizontal Vertical Model Milling Machine 4 Slots. The Metal : High quality 18 Gauge Mild Iron steel with Brass Accents. THIS NEAT LITTLE ROTARY TABLE, WITH A DIAMETER OF 100MM, CAN BE USED FOR A VARIETY OF MILLING, DRILLING AND MARKING OUT OPERATIONS IN THE HOME ENGINEER’S WORKSHOP. THERE ARE FOUR TEE SLOTS FOR SECURING THE WORK, FACES MACHINED AT RIGHT ANGLES FOR HORIZONTAL AND VERTICAL MOUNTING AND 7MM SLOTS FOR SECURING TO THE MACHINE TABLE. THE INDEXING HANDLE, WHICH ROTATES ONCE FOR EVERY TEN DEGREES OF TABLE ROTATION, IS SUBDIVIDED IN DEGREES AND QUARTER DEGREES. THE CENTRE HEIGHT WHEN MOUNTED VERTICALLY IS 40MM. SUPPLIED WITH WORK CLAMPING KIT. VERTICAL AND HORIZONTAL MOUNTING TEE SLOTS FOR SECURING WORK WHEEL MARKED IN DEGREES AND QUARTER DEGREES. A Precision work positioning device used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Rotary tables are most commonly mounted “flat”, with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it “flat” on a 90° angle plate), so that it rotates about a horizontal axis. In this configuration a tailstock can also be used, thus holding the work piece between centers. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. Milling curved profiles and angled faces relative to a centre line. Drilling or milling to polar co-ordinates and, when mounted vertically with a tailstock they can be used to machine shafts or spindles. The versatile units can also be used on drilling, boring or slotting machines permitting an even greater range of operations. Machining – To establish the initial work piece position simply loosen the zero Collar locking handle and rotate the zero collar anti-clockwise for about half A turn. The worm is now disconnected from the worm wheel drive, the table is Free to turn independently to the crank handle and the work piece may now be Accurately aligned. To re-engage simply turn the zero collar in the clockwise Direction and re-tighten the locking handle. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. The item “Rotary Table 4 Inch/100 mm Horizontal Vertical For Milling Premium Quality” is in sale since Tuesday, January 5, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Other Workholding”. The seller is “gurunanak_international” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- MPN: Does Not Apply
- Brand: Unbranded
Hv6/150mm Rotary Table Horizontal & Vertical With Double Bolt Tailstock
Precision Rotary Table 6 with Adjustable Tailstock. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. T Slot 16 mm. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Graduated 360 degree around its circumference. Tailstock for Rotary Table 6. It is an adjustable height tailstock used when you need to support a long part held in the rotary table- such as cutting a spline on a shaft. Precision made of heavy cast iron, it has a base for mounting to the mill table with T- bolts. Manufactured from Seasoned Grade Casting. Adjustable to Center Heights from 85 – 110 mm. The item “HV6/150MM ROTARY TABLE HORIZONTAL & VERTICAL WITH DOUBLE BOLT TAILSTOCK” is in sale since Tuesday, July 21, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “expert.tools” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Tilting: No
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: RUTWIK ENGINEERS
TROYKE 9 HORIZONTAL / VERTICAL ROTARY TABLE #U-9 with Aluminum Tooling Plate
TROYKE 9 HORIZONTAL / VERTICAL ROTARY TABLE – #U-9. Includes Aluminum Tooling Plate. Condition is “Used in good condition”. The item “TROYKE 9 HORIZONTAL / VERTICAL ROTARY TABLE #U-9 with Aluminum Tooling Plate” is in sale since Wednesday, January 20, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “artgeak” and is located in Lompoc, California. This item can’t be shipped, the buyer must pick up the item.
- Brand: Troyke
- Setting Position: Horizontal/Vertical
- MPN: 4215-9
Hilti PR 30-HVS Horizontal Vertical Slope Rotating Rotary Laser Red+PRA30 Remote
HILTI PR 30-HVS Horizontal Vertical Slope Rotating Rotary Laser Red with accessories. Comes with everything you need except for a tripod and grade rod. This listing includes the following. Hilti PR30 HVS Rotary Laser. Hilti PRA 30 Laser Eye R. Hilti PRA 83 Laser Eye R. Hilti PRA 84 Li-ion Battery. Hilti PUA 81 Battery Charger. (2) AA Batteries for Laser Eye Receiver/Remote. Owner’s Manual for Hilti PR 30-HVS and PRA 30. This machine will produce the following lasers. Horizontal self leveling laser. Sloped self leveling, auto aligning laser- (up to +15% or -8.6%) auto aligned to the grade rod and laser eye placed at 2 different elevations to align. Vertical self-leveling, auto aligning laser. You set the laser close to the left right alignment, then set the laser eye at the other end you want to align to and hit the auto align button on the remote and the machine will adjust to where the laser eye is placed. If the laser is in horizontal or sloped mode and is ever bumped or moved by the wind, the machine pauses, turns the laser beam off, and re-aligns. If it bumped really far that it is out of the slope range for realigning, it will turn off the laser beam and flash an error indicator so you never accidentally rely on a misaligned laser. The laser eye receiver can control the rotary laser machine and also tells you on an LCD screen on the front and back how many inches or mm to go up or down or it makes one type of beep to tell you to go up and another beep to tell you to go down. I have owned Leica, Topcon, Bosch, and several other lasers and this Hilti Laser, by far, has the most features and is very rugged. This laser has all the same features as the Hilti PR30-HVS A-12. The only difference is the A12 has a different battery and the top is shaped differently. The laser and all accessories are fully functional. Any Cosmetic flaws are noted below. Rotating laser- The rotating laser has some minor scuffs and marks consistent with light use. Minor scuffs consistent with light use. Laser Eye- Scuffs and scratches and marks. Screen is in good to excellent condition. Laser eye body is consistent with normal medium use. The rubber on one of the corners has a crack through and is lifting (See picture). This does not affect functionality. Minor scuffs and marks consistent with medium use. The item “Hilti PR 30-HVS Horizontal Vertical Slope Rotating Rotary Laser Red+PRA30 Remote” is in sale since Sunday, January 17, 2021. This item is in the category “Business & Industrial\Test, Measurement & Inspection\Levels & Surveying Equipment\Levels & Autolevels\Rotary Lasers”. The seller is “endmeyer007″ and is located in Grantsville, Utah. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.
- Model: PR 30-HVS
- Modified Item: No
- Country/Region of Manufacture: Germany
- Product: Rotary Laser Level & Laser Detector/Receiver
- Custom Bundle: Yes
- Number of Beams: 1
- Range: 1640 feet Diameter
- Leveling Method: Electronic Auto-Leveling
- MPN: 2065647
- Beam Color: Red
- Brand: Hilti
- Accuracy: +/- 0.03 inches at 33 feet
- Bundle Description: PR 30-HVS Laser, PRA 30 Laser eye, PRA 83 laser eye holder, PUA81 battery charger, PRA 84 battery, (2) AA Batteries
Rotary Table Horizontal Vertical Tilting 3, 4+ Chucks + 80 & 100mm Round Vice
3 / 80mm Rotary Table Horizontal Vertical 4 Slots. Table: 3 Diameter or 80mm. Table Height: 1 5/8. Center Height in Vertical Position: 1. Operates in the Horizontal or Vertical position. Hand Wheel calibrated to 10 degrees per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. 4 / 100mm Rotary Table Horizontal Vertical 4. Table 4 / 100mm manufactured for effective work. 4 T Slots for fixing work can be used with Clamping kit. Vertical Height 55 mm when table kept horizontal. Table graduated 0-360 degrees in 5 degree division. 4 / 100mm Rotary Table Tilting 4 Slots. Features to tilts between 0- 90 Degrees & can be locked at any position. Table diameter 100 mm. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation turns the table by 10 Degrees. Centre Height in vertical position: 2-5/8 (66 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. 50mm Lathe Chuck Self – Centering 3 jaw. Quality 3 jaw self centering chuck 50mm Diameter with. Contra rotating rapid jaw adjustment mechanism. 50mm Lathe Chuck Independent 4 jaw. 2 / 50mm LATHE CHUCK. 4 Jaw Independent Centering Chuck -Contra rotating rapid jaw adjustment mechanism. 1 Handle with 50mm chuck. 65mm Lathe Chuck Self – Centering 3 jaw. Quality 3 jaw self centering chuck 65mm Diameter with. 65 mm Lathe Chuck Independent 4 jaw. 4 Jaw Independent Centering Chuck. 1 Handle with 65mm chuck. Diameter of Base : 80 mm. Jaw Width : 54 mm. Jaw Depth: 20 mm. Jaw Opening : 32 mm. Made of high grade close grain caste Iron. The moving jaw has V-grooves to hold Round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Caste Iron 100 mm Round Vice for Rotary Table. Diameter of Base : 105mm Jaw Width : 80mm Jaw Depth: 21mm Jaw Opening : 40mm Height : 32. A Precision work positioning device used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Rotary tables are most commonly mounted “flat”, with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it “flat” on a 90° angle plate), so that it rotates about a horizontal axis. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. We ensure the product reaches you at the earliest. The item “Rotary Table Horizontal Vertical Tilting 3, 4+ Chucks + 80 & 100mm Round Vice” is in sale since Tuesday, February 11, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial-tools” and is located in Delhi, DL. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Tilting: Yes
- MPN: Does Not Apply
- Brand: Unbranded
Rotary Table 4 100mm Horizontal And Vertical With 65mm 3 Jaw Chuck & Backplate
4 (100mm) Rotary Table + 3 Jaw. (65mm) Self Centering Chuck + Back Plate. Rotary Tables 4 (100mm). Table graduated in 360 Degrees. The scale calibrated in 5 degree increment. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. 3 Jaw Self Centering Chuck (65mm) Dia. 65mm Self Centering Chuck 3 Jaw. Jaws are made of tool steel, hardened & ground. Body is made of graded cast iron. KIT INCLUDES : ROTARY TABLE + CHUCK + BACKPLATE + T-NUTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. The item “Rotary Table 4 100mm Horizontal And Vertical With 65mm 3 Jaw Chuck & Backplate” is in sale since Saturday, January 9, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- FREE SHIPPING: USA,GERMANY,FRANCE,SPAIN, ITALY, UK,MEXICO
- Table Graduated: 360 Degrees
- Packing: Hard Board
- Rotary Table Height:: 2-1/16″ (52mm)
- Rotary Table Slots: 4
- Rotary Table Dia: 4″ (100mm)
- Chuck type::: Reversible 3 Jaw Self Centering Chuck 65mm
- Chuck’s Back-Thread: M14x1
- MPN: Does Not Apply
- Brand: A V-1