horizontal
Johnson Electronic Self-Leveling Horizontal and Vertical Rotary Laser Kit







Johnson Electronic Self-Leveling Horizontal and Vertical Rotary Laser Kit – 40-6529. Versatile Tool: This rotary laser kit suits both outdoor and indoor applications. It is designed to meet your expectations when tackling any task, no matter where or when. Feature-Packed Kit For Your Comfort! This laser kit can self-level horizontally and vertically, making vertical layouts like fencing, footings, and drywall track possible. It also has an electronically controlled dual slope feature that eliminates the need for math when verifying grades or determining drainage. Great Accuracy: This tool showcases a visual and even an audio alert when it is beyond its leveling range. This offers excellent precision, making your job much easier to do. Excellent Power and Speed! This rotary laser kit features two rotational speeds: 300 and 800 RPM. You can finally take great control of your tasks with this tool that never disappoints. It also comes with a 6.4V battery adapter, an alkaline battery compartment (batteries not included), a remote control with 2 AA batteries, and a NiMH rechargeable battery pack.

Rotary Laser Level Self-Leveling Vertical Horizontal Scanning Measurement Tool


Rotary Laser Level Kit (Green/Red Laser). The rotary level has reached the industrial level and can emit a precise red beam for horizontal, vertical, and directional scanning. With 500 m working distance and 360-degree rotatable design, this rotating laser level creates stable scan lines for maximum visibility in light conditions. Our rotary self-level laser is widely used in construction projects, large equipment installation, room decorating, etc. 360-Degree & 500M Scanning. The laser level, tripod, and staff combination support a maximum working distance of 500 m and accurate measurement. Widely used in architecture construction and indoor decorating. The rotary level laser provides an advanced 360-degree rotary laser module, emitting highly visible and focused red beams with 635 nm wavelength. The leveling staff has five telescoping sections with 16.4 ft/5 m length after full stretching, which almost keeps straight and is not shaky at the joints. The telescoping leveling rod has double-sided precise scales, which can be used for accurate measurement and rough measurement, respectively. Measuring Range: Diameter: 500 m (using the laser detector). Spinning Speed: 0/60/120/300/600 rpm. Slope-Adjusting Range: ±5° (Bi-Directional). Light Source: Laser Diode, Wavelength: 635 nm. Down Point Diode: Accuracy: ±1 mm/1.5 m. Remote Controlling Distance: Approximately 20 m. Rechargeable Battery: DC 4.8-6V. Continuous Work: 20 hours.

3 Inches (75Mm) 4 Slots Horizontal and Vertical (H/V) Rotary Table with M6 Clam













3 Inches (75Mm) 4 Slots Horizontal and Vertical (H/V) Rotary Table with M6 Clamp Kit for Milling Engineering Tools. A great combo of 3/80 mm Rotary table with M6 clamp Kit. Quality Low Profile Rotary Table diameter 80 mm (3Inches). Table is graduated 360 Degrees. M6 Clamp kit -Suits to 3 inches Rotary Table. This Set includes Following: 2 x step blocks 2 x tee bolts with flanged nut 2 x clamps Bolt length: 55 mm overall & Bolt Thread M6. “A great combo of 3″/80 mm Rotary table with M6 clamp Kit. 3inches rotary Table: 1. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position without chuck: 2-5/8 (66 mm approx) 4. Hand wheel is graduated in divisions of 10 min & can be set to zero. M6 Clamp Kit: 1. M6 Clamp kit -Suits to 3 inches Rotary Table 2. TOOL STEEL & CASTING. 8 x 6 x 3 inches. We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. Your feedback very important to us, after you get your package and you are. Satisfied with our service. If you have any problem with your order / any questions please before leave any type of feedback. Thank you for shopping at our store.

4 100MM Rotary Table Horizontal Vertical 4 Slots With Single Bolt Tailstock













4 100MM Rotary Table Horizontal Vertical 4 Slots With Single Bolt Tailstock. Chuck Diameter 4? (100 mm). Vertical Center Height 2-1/16? Approx. Hand Wheel can be set to zero. Hand Wheel graduated in 10 min divisions. Cali berated in 5 min increment around the rim. Can be used both Horizontally & Vertically. Small Lathe Tailstock suitable for 3″ (75 mm) & 4″ (100 mm) Rotary Tables. Very Robust quality tailstock in Caste Iron, the moving dead centre in EN31- hardened & ground. Elegantly designed in a way that same tailstock suits to 3″ & 4″ Regular and tilting models of our Rotary Tables.

4 100MM Rotary Table Horizontal Vertical 4 Slots With Single Bolt Tailstock













4 100MM Rotary Table Horizontal Vertical 4 Slots With Single Bolt Tailstock. Chuck Diameter 4? (100 mm). Vertical Center Height 2-1/16? Approx. Hand Wheel can be set to zero. Hand Wheel graduated in 10 min divisions. Cali berated in 5 min increment around the rim. Can be used both Horizontally & Vertically. Small Lathe Tailstock suitable for 3″ (75 mm) & 4″ (100 mm) Rotary Tables. Very Robust quality tailstock in Caste Iron, the moving dead centre in EN31- hardened & ground. Elegantly designed in a way that same tailstock suits to 3″ & 4″ Regular and tilting models of our Rotary Tables.

Rotary Table 3 inch (75 mm) Horizontal & Vertical Model- Milling Machine Tool


New Rotary Table 3 inch /75 mm Horizontal & Vertical Model- Milling Machine. Precision Small low profile Rotary Table for Milling operation with Table Diameter – 3 Inches (75 mm). Vertical Height – 1-5/8 Inch. Gear Ratio – 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees. Table scale is calibrated in 5 degree. Can be used both in horizontal & vertical position.

Prolinemax 10” Horizontal & Vertical Rotary Table Vernier Reading Milling Drill













Prolinemax 10” Horizontal & Vertical Rotary Table Vernier Reading Milling Drilling Boring. Table Diameter: 9.84″; Horizontal O/A Height: 4.53″; Center Height Vertical Position: 6.49; The diameter of the center hole is 15mm and taper is MT3. Overall Height in Vertical Position: 12.79”; Overall Width (Not Including Handle) In Vertical Position: 11.02”; Mounting Table Bolt Width :0.63”; T-slot Width: 0.55′. Extra Deep Coolant Channel; Dual Positive Action Locks; Satin Chrome Dials; Maximum Individual Spacing Error 4″ Table 120″, 6″ Table 80″, 8, 10, 12, 16″ Tables 60″; 4″ Table Utilizes Low Profile Locks For Added Work Space; Gear Ratio: 4″ table is72:1; 6-16 tables are 90:1; Parallelism Of Clamping Surface To Angle Face. 0008; Squareness of angle Surface To Clamping Surface. 0004; Flatness Of Clamping Service-concave. 0006; Concentricity Of Center Bore. 10” Horizontal & Vertical Rotary Table. Table Diameter: 9.84. Horizontal O/A Height: 4.53. Center Height Vertical Position: 6.49. Overall Height in Vertical Position: 12.79′. Overall Width (Not Including Handle) In Vertical Position: 11.02′. Mounting Table Bolt Width :0.63′. T-slot Width: 0.55′. The diameter of the center hole is 15mm and taper is MT3. Extra Deep Coolant Channel. Dual Positive Action Locks. Maximum Individual Spacing Error 4″ Table 120″, 6″ Table 80″, 8, 10, 12, 16″ Tables 60″. 4 Table Utilizes Low Profile Locks For Added Work Space. Gear Ratio: 4″ table is72:1; 6-16″ tables are 90:1. Flatness Of Clamping Service-concave. Concentricity Of Center Bore. Parallelism Of Clamping Surface To Angle Face. Squareness of angle Surface To Clamping Surface. Squareness of clamping surface to center slot. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help.

Rotary Table 4 100mm Horizontal And Vertical With 65mm 3 Jaw Chuck Backplate











Rotary Table 4 100mm Horizontal And Vertical With 65mm 3 Jaw Chuck Backplate. Rotary Tables 4? (100mm). Table graduated in 360 Degrees. The scale calibrated in 5 degree increment. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. 3 Jaw Self Centering Chuck (65mm) Dia. 65mm Self Centering Chuck 3 Jaw. Jaws are made of tool steel, hardened & ground. Body is made of graded cast iron. KIT INCLUDES : ROTARY TABLE + CHUCK + BACKPLATE + T-NUTS.

Horizontal Vertical 4 Inch II 100 mm Rotary Milling Tables


A rotary table is a precision tool used predominantly in metalworking, particularly in machining operations like milling and drilling. Its primary function lies in enabling machining at precise angular intervals around a fixed point, commonly referred to as indexing. This capability facilitates the creation of intricate geometries, circular features, and multi-sided machining without the need for manual repositioning of the workpiece. 360-Degree Graduation: The table is graduated a full 360 degrees, allowing for precise control and positioning of the workpiece. The clear markings ensure easy and accurate angle setting for all your milling tasks. Worm Gear Ratio: 1:36 The gear ratio means that one full rotation of the handle turns the table by 10 degrees, providing fine control over the movement and ensuring precision in every operation. Vertical Position Center Height: 2-1/16 (50 mm approx) The center height in the vertical position is 2-1/16 inches, which aligns perfectly with the smaller milling machine setups, offering versatility in workpiece positioning. Handwheel Graduations: The handwheel is graduated in divisions of 10 minutes, allowing for highly detailed adjustments. The scale can also be set to zero, making it easy to track and repeat your adjustments for consistent results. Mounting Flexibility: The Regular model can be mounted in both horizontal and vertical positions, enhancing its versatility for a wide range of applications. Whether you need flat or angled cuts, this rotary table can handle it with ease.

CNC horizontal vertical 4th axis rotary table with 6 Dia manual scroll chuck









CNC horizontal vertical 4th axis rotary table with 6 Diameter manual scroll chuck. Its working condition is unknown and we have no way to test it out. Please see all photos as part of item’ s description. Please double check that You can use it and ask question… We take pictures/ videos every package of each item showing our tamper proof return authorization sticker/ seal. We make video/ videos the unpacking of return item/ items. Our goal is to solve all as quickly as possible. Location: next to manual book cabinet.
