rotary
New Rotary Table 4 / 100mm Horizontal & Vertical with 80mm 3jaw Self centering
New Rotary Table 4 / 100mm Horizontal & Vertical with 80mm 3jaw Self centering. Rotary Table 4/100mm. Chuck Diameter 4? (100 mm). Vertical Center Height 2-1/16? Approx. Hand Wheel can be set to zero. Hand Wheel graduated in 10 min divisions. Cali berated in 5 min increment around the rim. Can be used both Horizontally & Vertically. 80mm 3 Jaw self centering Chuck. Chuck Size:- 80mm. 2 Kgs / 4.4 Lbs. Suitable For:- 4/100 MM Rotary Table.
New Rotary Table 4 / 100mm Horizontal & Vertical with 80mm 3jaw Self centering
New Rotary Table 4 / 100mm Horizontal & Vertical with 80mm 3jaw Self centering. Rotary Table 4/100mm. Chuck Diameter 4? (100 mm). Vertical Center Height 2-1/16? Approx. Hand Wheel can be set to zero. Hand Wheel graduated in 10 min divisions. Cali berated in 5 min increment around the rim. Can be used both Horizontally & Vertically. 80mm 3 Jaw self centering Chuck. Chuck Size:- 80mm. 2 Kgs / 4.4 Lbs. Suitable For:- 4/100 MM Rotary Table.
4/ 100 mm Rotary Table with Suitable Tailstock Small Chuck Milling Indexing
Quality Tool Set of 4 Regular Rotary Table with a suitable Tailstock & Chuck with Back Plate & fixings T nut Bolts. Chuck Body is High Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table. It can be mounted both in Horizontal & vertical position. Hand wheel is graduated in divisions of 10 min & can be set to zero.
Rotary Table 4/ 100 mm Tilting Horizontal And Vertical
Precision Tilting Rotary Table Features to tilts between 0- 90 Degrees & can be locked at any working position. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Hand wheel is graduated in divisions of 10 min & can be set to zero. Provided with oil nipple for oiling of inside body. Center Height in horizontal position when lay flat : 2-3/4 (70 mm approx). Center Height in vertical position: 3 Inch approx (77 mm). Can be clamped vertically and horizontally both ways. Body & table are made of caste Iron. Rest of the parts are made of tool steel. Body is painted black. Knobs, dials and locking screws are all plated and Rest of the working surface are precisely ground. Rotary’s handle are knurled for firm gripping while rotating and epoxy black finish for a long rust free life. Base Dimensions : 142 x 128 mm. 2 Opposite counter drills of 9.5 mm diameter are located at a PCD of 102 mm approx for mounting. Condition : Wrong product or damaged product delivered.
Rotary Table 3 80mm Precision for Milling Machine Horizontal & Vertical 4 Slots
3 80mm ROTARY TABLE HORIZONTAL / VERTICAL WITH 4 MILLING SLOTS. Table Height : 44mm (1-5/8). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments.
Rotary Table 4/ 100 mm Precision For Milling Machine Horizontal And Vertical
Table Height : 2-1/16 (52 mm). Can be used in both horizontal & vertical position. Table graduated in 360 Degrees. The scale calibrated in 5 degree increment. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Condition : Wrong product or damaged product delivered.
Rotary Table Horizontal Vertical For Milling 3 & 4 Inch Graduated 360 Degrees
Rotary Table Horizontal Vertical. 3” /75 mm & 4 /100 mm 3 Slots Regular Rotary Table graduated 360 degrees & designed for smaller milling machines Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. T slots are suited for M6 thread accessories. Rigid Caste Iron construction. Alloy Steel Worm & Brass Gear assembly. Table graduated in 360 Degrees. Can be used in both horizontal & vertical position.
4 / 100 MM Rotary Table With 65 MM 3 Jaws Self Centering Chuck (usa Fuflilled)
4 Inch / 100 MM ROTARY TABLE WITH CHUCK MILLING INDEXING MACHINE TOOLS 65 MM 3 JAWS SELF CENTERING CHUCK. Made of Caste Iron, Precision High Quality 4 /100 mm Regular Rotary Table designed for smaller milling machines. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Height when laid horizontally 2-5/16 Inches (58 mm). Center Height in vertical position: 2-1/8 (53.5 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be clamped vertically and horizontally both ways. Base Dimensions : 135 mm x 105 mm with 2 x U slots (9.5 mm). Body is painted and Rest all working surfaces are precision ground. The Dial and locking screws are plated and Handle has epoxy black finish for a rust free life. Smooth Jerk free easy rotation with negligible play. The top of the table is ground to eliminate any excess run out. It is mainly used to cut gear teeth accurately and equal spacing of the teeth of the gear. Also used for milling gears, splines, squares, cutting of flutes in reamers, drills and milling cutters, racks, grinders, etc. 65 MM 3 JAW SELF CENTERING CHUCK. Set of 4 Regular Rotary Table with a 65 MM 3 Jaws Self Centering Chuck with Back Plate & fixingsT nut Bolts. Chuck Body is High Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table. It can be mounted both in Horizontal & vertical position.
Rotary Laser Level 360 8 Lines 3D Cross Line Self-Leveling Horizontal Vertical
This product is a semiconductor laser device, the light is clear and bright, and the visible laser horizontal line and vertical line of the automatic leveling can be simultaneously issued separately. Provide accurate level and plumb bod reference for interior decoration, woodworking installation, brickwork construction, etc. This product is easy to operate and widely used. The laser level has three laser windows, each window can launch 4 laser lines, totally 8 laser lines(4 laser lines combine to a plane). Attention: There are at least 4 laser lines, it can not keep 1 or 2 laser lines. The 3D laser is a cross line laser level. This unit is self-leveling with accuracy range of within ± 3°. The working range of this laser is up to 15m(indoor) and 60m by working with laser receiver, depending on the work area’s illumination. Design: The 3D laser level is a compact, practical option for basic cross line leveling work. Measuring at 1/4 , the laser can fit comfortably in the palm of your hand. Mounting Options: It has a hard plastic housing to protect the laser beams and pendulum leveling system within. The housing has a ribbed rubber casing that protects it from scratches while giving extra friction to make it slip resistant. Leveling function: Once the pendulum is in unlocked condition, the instrument will be self-leveling within 3.5 degrees, when the unit is using out of the leveling range, laser lines and main indicator will keep flashing. Pendulum Lock: The 3D laser level is a precision instrument and should be treated with care. When not in use, the pendulum should always be in the Off position (OFF mode). Locking the pendulum allows the Cross Line Laser to better withstand vibration and Trauma incurred during transportation or if the units is dropped. Do not stare directly into the beam or voew directly with optical instruments or set up the laser at eye level. Do not try to dismantle the instrument. Repaire it from professional. The label/print samples are placed on the product to inform the laser class for your convenience and safety. Do not operate the laser around children or allow children to operate the laser. Do not use the laser beam to point to. Ehicle drivers or pedestrians as well as. Highly reflective material such as mirror. Do not modify the laser in any way. Modifying the tool may result in hamzardous Laser Radiation Exposure.
Rotary Table 4 Inch/100 mm Horizontal Vertical For Milling Premium
Rotary Table 4 100mm Horizontal Vertical Model Milling Machine 4 Slots. The Metal : High quality 18 Gauge Mild Iron steel with Brass Accents. THIS NEAT LITTLE ROTARY TABLE, WITH A DIAMETER OF 100MM, CAN BE USED FOR A VARIETY OF MILLING, DRILLING AND MARKING OUT OPERATIONS IN THE HOME ENGINEER’S WORKSHOP. THERE ARE FOUR TEE SLOTS FOR SECURING THE WORK, FACES MACHINED AT RIGHT ANGLES FOR HORIZONTAL AND VERTICAL MOUNTING AND 7MM SLOTS FOR SECURING TO THE MACHINE TABLE. THE INDEXING HANDLE, WHICH ROTATES ONCE FOR EVERY TEN DEGREES OF TABLE ROTATION, IS SUBDIVIDED IN DEGREES AND QUARTER DEGREES. THE CENTRE HEIGHT WHEN MOUNTED VERTICALLY IS 40MM. SUPPLIED WITH WORK CLAMPING KIT. VERTICAL AND HORIZONTAL MOUNTING TEE SLOTS FOR SECURING WORK WHEEL MARKED IN DEGREES AND QUARTER DEGREES. A Precision work positioning device used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Rotary tables are most commonly mounted “flat”, with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it “flat” on a 90° angle plate), so that it rotates about a horizontal axis. In this configuration a tailstock can also be used, thus holding the work piece between centers. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. Milling curved profiles and angled faces relative to a centre line. Drilling or milling to polar co-ordinates and, when mounted vertically with a tailstock they can be used to machine shafts or spindles. The versatile units can also be used on drilling, boring or slotting machines permitting an even greater range of operations. Machining – To establish the initial work piece position simply loosen the zero Collar locking handle and rotate the zero collar anti-clockwise for about half A turn. The worm is now disconnected from the worm wheel drive, the table is Free to turn independently to the crank handle and the work piece may now be Accurately aligned. To re-engage simply turn the zero collar in the clockwise Direction and re-tighten the locking handle. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle.