chuck
3” & 4 IN Tilting Rotary Table with 4-Jaws SelfCentering lathe Chuck 50 & 65MM







3″ & 4″ inch Tilting Rotary Table with 4-Jaws Self Centering Lathe Chuck 50 & 65mm, Back plate & Fixing T-nuts bolts. A great combo of Tilting Rotary table (3″in 75mm & 4″in 100mm) with 4 jaws self centering chuck (50 & 65mm) with back plates & T-nuts.

3/ 80mm Rotary Table with Chuck and Tailstock Milling Indexing Machine Tools



3/ 80mm Rotary Table with Chuck and Tailstock Milling Indexing Machine Tools. ABOUT THE ITEM. A PERFECT MILLING COMBO FOR YOUR S SMALL MILLING MACHINE NEEDS. SET INCLUDES A LOW PROFILE 80 MM DIAMETER ROTARY TABLE, 1 SET OF CHUCK With BACK PLATES & T NUTS BOLTS WITH A SUITABLE TAILSTOCK. THE ROTARY TABLE AND CHUCK ASSEMBLY CAN BE MOUNTED BOTH HORIZONTALLY & VERTICALLY. WORM : GEAR RATION IS 1: 10, THAT MEANS ONE HANDLE ROTATION TURNS THE 360 DEGREES GRADUATION TABLE BY 10 DEGREES. TO USA & WORLDWIDE. Please be aware that some countries may have local import regulations which restrict certain products from being imported.

Rotary Table 4 100mm Horizontal And Vertical With 65mm 3 Jaw Chuck & Backplate






4 (100mm) Rotary Table + 3 Jaw. (65mm) Self Centering Chuck + Back Plate. Table graduated in 360 Degrees. The scale calibrated in 5 degree increment. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. 3 Jaw Self Centering Chuck (65mm) Dia. 65mm Self Centering Chuck 3 Jaw. Jaws are made of tool steel, hardened & ground. Body is made of graded cast iron. KIT INCLUDES : ROTARY TABLE + CHUCK + BACKPLATE + T-NUTS.

Rotary Table Horizontal & Vertical 3 75mm With 50mm Lathe Chuck With Back Plate





Rotary Table HV 3 / 75 mm with 50 mm Lathe Chuck. ROTARY TABLE 3/75mm. Table Height With Chuck : 95mm. Worm Gear has 36:1 ratio. The hand wheel is in 10 min division and can be set at 0. Can be used both Vertically & Horizontally. LATHE CHUCK SELF CENTERING 50 MM – 3 JAW. Comes with Suitable T Nuts & Bolts. This Whole Unit can be Assembled & Disassembled Easily to use Either Rotary Table or Chuck Separately.

HV Rotary Table 4/ 100 mm With 70 mm 4 Jaw Chuck & Backplate (USA FULFILLED)

















Table graduated in 360 Degrees. The scale calibrated in 5 degree increment. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. 4 Jaw Self Centering Chuck (65mm) Dia. 70 mm Self-Centering Chuck 4 Jaw. Jaws are made of tool steel, hardened & ground. Body is made of graded cast iron. KIT INCLUDES : ROTARY TABLE + CHUCK + BACKPLATE + T-NUTS.

HV Rotary Table 4/ 100 mm With 65 mm 3 Jaw Chuck & Backplate (USA FULFILLED)















Table graduated in 360 Degrees. The scale calibrated in 5 degree increment. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. 3 Jaw Self Centering Chuck (65mm) Dia. 65mm Self Centering Chuck 3 Jaw. Jaws are made of tool steel, hardened & ground. Body is made of graded cast iron. KIT INCLUDES : ROTARY TABLE + CHUCK + BACKPLATE + T-NUTS.

Hv Milling 4/ 100 Rotary Table & Small Chuck & Back Plate- (usa Fulfilled)











Quality Tool Set Of 4 Regular Rotary Table With A Chuck With Back Plate & Fixingst Nut Bolts. Chuck’s Body Is High Grain SG Caste Iron & Jaws Are Of Tool Steel. Jaws Are Hardened & Ground. A Tool Steel Back Plate Is Supplied With Fixing T Nuts To Mount The Chuck On It. Back Plate Is Drill In A Manner That Will Fit Both 3 As Well As 4 Slots Table. The Back Side Of The Plate Has A Locating Spigot To Center The Mounting On To The Table. It Can Be Mounted Both In Horizontal & Vertical Positions. The hand Wheel Is Graduated In Divisions Of 10 Min & Can Be Set To Zero. Brand New Very High Quality 4 /100 mm Regular Rotary Table designed for smaller milling machines. Table is graduated 360 Degrees. Worm Gear Ratio -1:36 means that the 1-handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical positions. 50 MM 4 JAW INDEPENDENT CHUCK. Brand New, High Precision- Superb Quality! 50 mm 4 Jaws Independent Chuck M12 x 1 mounting Thread. Back Plate also has M12 x 1 thread Spigot to mount the Chuck on it. Back Plate is drilled in a manner that it can be fitted both for 3 as well as 4 Slot Rotary Table. Suitable T -nuts are also supplied. 65 MM 3 JAW SELF-CENTERING CHUCK. 65 mm 3 Jaws Self Centering Chuck M14 x 1 mounting Thread. Back Plate also has M14 x 1 thread Spigot to mount the Chuck on it. Back Plate is drilled in a manner that it can be fitted ONLY to 4 Slot Rotary Table. 70 MM 4 JAW INDEPENDENT CHUCK. 70 mm 4 Jaws Self Centering Chuck with Back Plate & Fixing- Suitable to Mount on 3″ (75 mm) & 4″ (100 mm) Rotary Table -4 Slots Tables. Designed to fit our 3 or 4 Rotary table 4 slots. The chuck mounting is standard Uni-mat Thread M14 x 1.

3 Rotary Table 3 slot and 80mm lathe chuck with reversible jaws




3 Small Mini Rotary Table -3 Slots with 80 mm 3 Jaws Chuck Self Centering Mounting. SIZE: 3″INCH ROTARY TABLE DIAMETER 3″-80 MM. ENABLE THE USER TO DRILL OR CUT ANY WORK AT AN EXACT INTERVAL AROUND A FIXED AXIS (GENERALLY VERTICAL OR HORIZONTAL). PROUDLY MADE IN INDIA. Tools comprises of a dedicated and skilled team of engineers with an aim of providing you tools of highest indian industrial standards. Situated at the industrial hub of india we specialize in providing complete tooling solutions. Our Motto : Right Quality. Our Advice : Check with Atoz. We are looking foward to your positive reviews and to build a long term relationship.
