chuck
Rotary Table 4 / 100mm HV + 65mm self centering lathe chuck + 80MM ROUND VICE


Xtra Heavy Model ATOZ. Rotary Table 4 / 100 mm. Precision Rotary Table 4 100mm manufactured for effective work. 4 T Slots for fixing work can be used with Clamping kit. Vertical Height 55 mm when table kept horizontal. Table graduated 0-360 degrees in 5 degree divisions. Supplied complete with a key as well as set of tee nuts and studs to secure it into place. Quality 3 jaw self centering chuck 65mm Diameter with 14x1mm Thread. Contra rotating rapid jaw adjustment mechanism. Backplate is drilled and counterbored to fit a range of 3″ and 4″ rotary tables with 4 Slots. Round Vice 80mm Made of high grade close grain caste Iron. The moving jaw has V-grooves to hold Round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Diameter of Base : 80 mm. Jaw Width : 54 mm. Jaw Depth: 20 mm. Jaw Opening : 32 mm. A Precision work positioning device used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Rotary tables are most commonly mounted “flat”, with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it “flat” on a 90° angle plate), so that it rotates about a horizontal axis. In this configuration a tailstock can also be used, thus holding the work piece between centers. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. Milling :Milling curved profiles and angled faces relative to a centre line. Drilling or milling to polar co-ordinates and, when mounted vertically with a tailstock they can be used to machine shafts or spindles. The versatile units can also be used on drilling, boring or slotting machines permitting an even greater range of operations. Machining – To establish the initial work piece position simply loosen the zero Collar locking handle and rotate the zero collar anti-clockwise for about half A turn. The worm is now disconnected from the worm wheel drive, the table is Free to turn independently to the crank handle and the work piece may now be Accurately aligned. To re-engage simply turn the zero collar in the clockwise Direction and re-tighten the locking handle. Rotary table can be used for. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. Product Specifications : Atoz adjustable hand reamers are designed with enough adjustment to ream almost any odd size hole. Blades are made of carbon steel. For long life and can be adjusted by loosening one nut while tightening the other. They are used mostly for repair work in the field. Photo for representation purpose only. May not be as the same as displayed. Please ask for original photos if required. PROUDLY MADE IN INDIA. Neu-Werkzeuge comprises of a dedicated and skilled team of engineers with an aim of providing you tools of highest Indian industrial standards. Situated at the industrial hub of India we specialize in providing complete tooling solutions. /DHL/Aramex/My Pacco or India Post with Tracking facility. We ensure the product reaches you at the earliest. We are looking forward to your positive reviews and to build a long term relationship. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “neu-werkzeuge2018″ and is located in this country: IN.
- Brand: Neu-werkzeuge
- Model: RT-4+65MM
- Operation: Manual
- Setting Position: Horizontal/Vertical
- Tilting: No

CNC 4th A Rotary Axis 3 Jaw Chuck Activity Tailstock Center CNC Router Engraver


CNC 4th A Rotary Axis. CNC 4th A rotary axis 3 jaw chuck 50mm activity tailstock Center height 44MM for CNC Router Engraver Milling Machine. 50mm Chuck 4th axis. Chuck: 50MM 3-jaw chuck. Speed reducing ratio: 4:1. Stepper motor: Two phase 42 stepper motor. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “dembergear1″ and is located in this country: CN. This item can be shipped worldwide.
- Color: 4 axis only
- Ships From: China
- Brand: Unbranded
- Tilting: No
- Custom Bundle: No
- Cross-Slide: No
- Setting Position: Horizontal/Vertical
- Operation: CNC
- Country/Region of Manufacture: China
- Modified Item: No

Rotary Table 3 Inch 80 mm 4 slot with 65 mm Mini Lathe Chuck for Milling Machine







Supplied complete with a key as well as set of tee nuts and studs to secure it into place. Table Height: 1 5/8. Center Height in Vertical Position: 1. Operates in the Horizontal or Vertical position. Hand Wheel calibrated to 10 degrees per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. Quality 3 jaw self centering chuck 65mm Diameter. Contra rotating rapid jaw adjustment mechanism. Backplate is drilled and counterbored to fit a range of 3″ and 4″ rotary tables with 4 Slots. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “workshoptools-2020″ and is located in this country: IN. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- chuck diameter: 65mm
- chuck type: 3 jaw reversable chuck
- Brand: TORRENS

D1 4 Chuck To Rotary Table Mount




Mount your D1 4 chuck to your rotary table, mill table, fixture plate or your vice. You will have to drill your own holes for bolting it down, the mount will definitely accommodate a 3 hole pattern 5.250 diameter and would probably accommodate a 4 hole pattern. It is 6 inches in diameter. IT HAS A COUPLE OF BLEMISHES ON 1 FACE YOU CAN SEE IN THS PICTURE, IT SHOULDN’T AFFECT THE USE. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “critter8793″ and is located in this country: US. This item can be shipped to United States.
- Brand: Unbranded
- Setting Position: Horizontal/Vertical
- Operation: Manual

New 4 Inches (100mm) Rotary Table +70 mm 4 Jaw Independent Chuck+ Backplate




Rotary Table 4/100 MM. Can be used both Vertically & Horizontally. Able (chuk) Diameter : 100 mm / 4. Vertical center Height : 2-1/16 (approx 51 mm). Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. Caliberated in 5 min increment around the rim. 4 JAW 70 mm INDEPENDENT LATHE CHUCK. Jaws are made of tool steel, hardened & ground. BODY MATERIAL : GRADE CAST IRON. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “model_tools” and is located in this country: IN. This item can be shipped worldwide.
- Brand: model tools
- Tilting: No
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Country/Region of Manufacture: India
- Modified Item: No

3”/75 mm Rotary Table Horizontal / Vertical 4Slot With 4 jaw 65 mm Lathe Chuck




Rotary Table 3 Inch Or 75 mm. Can be used both Vertically & Horizontally. Precision Mini Rotary Table 3 or 75mm is manufactured from Seasoned casting. Precisely maintained Chuck Run Out and Bottom Surface for accurate work. 4 T Slots for fixing work can be used with Clamping kit. Table graduated 0-360” in 5 divisions. Winding handle is graduated 0-10” in 5 minute divisions. 65 mm 4 Jaw Self Centering Lathe Chuck. Jaws are made of high quality TOOL STEEL. BODY MATERIAL : GRADE CAST IRON. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “model_tools” and is located in this country: IN. This item can be shipped worldwide.
- Brand: model tools
- Tilting: No
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Country/Region of Manufacture: India
- Modified Item: No

Rotary Table Horizontal & Vertical 3/80 mm+ 3Jaw Selfcentering 65mm Lathe Chuck





Table Height: 1 5/8. Center Height in Vertical Position: 1. Operates in the Horizontal or Vertical position. Hand Wheel calibrated to 10 degrees per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. Supplied complete with a key as well as set of tee nuts and studs to secure it into place. Quality 3 jaw self centering chuck 65mm Diameter with 14x1mm Thread. Contra rotating rapid jaw adjustment mechanism. Backplate is drilled and counterbored to fit a range of 3″ and 4″ rotary tables with 4 Slots. The holiday season is the busiest shopping period of the year, don? Our catalog covers every festival including Thanksgiving, Black Friday, Cyber Monday, Christmas. Please do visit our store and get yourself a treat. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “baani_pk” and is located in this country: IN. This item can be shipped worldwide.
- Brand: Unbranded
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical

4 regular Rotary Table +70 mm 4 Jaw Chuck+ Back Plate+ Fixing USA FULFILLED





4 Inches (100mm) 4 slots regular Rotary Table +70 mm 4 Jaw Independent Chuck+ Back Plate+ Fixings. ABOUT THE ITEM. Quality Tool Set of 4 Regular Rotary Table with a 70 MM 4 Jaws independent Chuck with Back Plate & fixingsT nut Bolts. Chuck Body is High Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table. It can be mounted both in Horizontal & vertical position. Hand wheel is graduated in divisions of 10 min & can be set to zero. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tools4every1″ and is located in this country: US. This item can be shipped to United States.
- Brand: TOOLS4EVERY1
- Tilting: No
- Custom Bundle: No
- Cross-Slide: Yes
- Setting Position: Horizontal/Vertical
- Operation: Manual
- Country/Region of Manufacture: India
- Modified Item: No

4 /100 MM Milling Rotary Table With 70 MM 4 Jaw Independent Chuck USA Fulfilled






4” /100 MM MILLING ROTARY TABLE WITH 70 MM 4 JAW INDEPENDENT CHUCK. ROTARY TABLE WITH CHUCK. Quality Tool Set of 4 Regular Rotary Table with a 70 MM 4 Jaws independent Chuck with Back Plate & fixingsT nut Bolts. Chuck Body is High Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table. It can be mounted both in Horizontal & vertical position. Hand wheel is graduated in divisions of 10 min & can be set to zero. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolswholesale” and is located in this country: US. This item can be shipped to United States.
- Brand: Toolswholesale
- Tilting: No
- Custom Bundle: No
- Cross-Slide: Yes
- Setting Position: Horizontal/Vertical
- Operation: Manual

Rotary Table Horizontal & Vertical 3/80 mm+ 3Jaw Selfcentering 65mm Lathe Chuck





Table Height: 1 5/8. Center Height in Vertical Position: 1. Operates in the Horizontal or Vertical position. Hand Wheel calibrated to 10 degrees per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. Supplied complete with a key as well as set of tee nuts and studs to secure it into place. Quality 3 jaw self centering chuck 65mm Diameter with 14x1mm Thread. Contra rotating rapid jaw adjustment mechanism. Backplate is drilled and counterbored to fit a range of 3″ and 4″ rotary tables with 4 Slots. The holiday season is the busiest shopping period of the year, don? Our catalog covers every festival including Thanksgiving, Black Friday, Cyber Monday, Christmas. Please do visit our store and get yourself a treat. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “baani_pk” and is located in this country: IN. This item can be shipped worldwide.
- Brand: Unbranded
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
