chuck
New! Yuasa Display Model 550-006 Accu-dex Rotary Index With 6.5 3-jaw Chuck
YUASA DISPLAY MODEL 550-006 ACCU-DEX ROTARY INDEX WITH 6.5 3-JAW CHUCK. YUASA DISPLAY MODEL 550-006 6.5″ ACCU-DEX ROTARY INDEX WITH 6.5″ 3-JAW CHUCK CLEANED OF OXIDATION FROM AGING. THIS WAS A NEW DISPLAY OR SHOW ROOM UNIT. May be open box from viewing, inspecting or from taking pictures but never the less, item is NEW. Old inventory may also be repackaged due to old, worn or damaged original packaging. 15 TO 30 YEAR OLD INVENTORY RECOVERED FROM WAREHOUSE STORAGE. COMES AS SHOWN IN PICTURES! Please read description carefully, we describe our items as best as possible. Let us know any questions! We also ask you to review all our pictures, our items come as presented in pictures. We normally answer our messages and emails within the same day. But some times due to the amount of calls, messages and emails we process during the day, we ask our customers to please be patient and allow 24 to 48 hours to process your messages. We want happy and returning customers! Crating and Special Packing Requirements; Crating, bubble wrap or a special setup, may incur extra charges. Please note that exchanges are not always available for every item we sell. Please keep all the elements of the package together as you received it and take clear pictures of the damage. Please allow 24 to 48 hours to document and process any case. The item “NEW! YUASA DISPLAY MODEL 550-006 ACCU-DEX ROTARY INDEX WITH 6.5 3-JAW CHUCK” is in sale since Monday, January 27, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “ipstool” and is located in South El Monte, California. This item can be shipped to United States.
- Brand: Yuasa
- MPN: 550-006
- Country/Region of Manufacture: Japan
Rotary Table 4 + 70 MM Independent Chuck + Tailstock + Clamping Kit
ROTARY TABLE 4 + 70 MM INDEPENDENT CHUCK + BACKPLATE. Our 4 (100 mm) Rotary Table is Designed for smaller milling machines. Table diameter 100 mm. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx). Hand wheel is graduated in divisions of 10min & can be set to zero. Can be mounted both in Horizontal & vertical position. A high Quality 4 Jaw Independent chuck, the body of chuck is made from SG Iron & Jaws are of Tool steel hardened & ground. Supplied with a mounting back plate & fixing tee nuts with screws. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The chuck mounting is Thread M14 x 1. This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is Required. These are adjustable for different hieghts & also having fine feed centre point and the centre tip is hardend and Ground. It is made up of good grade of cast iron. It is Very useful product to use. CLAMPING KIT M 6. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “ROTARY TABLE 4 + 70 MM INDEPENDENT CHUCK + TAILSTOCK + CLAMPING KIT” is in sale since Monday, November 9, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Unbranded
Rotary Table Horizontal And Vertical 4100mm With 65mm 4 Jaw Chuck & Backplate
4 (100mm) Rotary Table + 4 Jaw. (65mm) Self Centering Chuck + Back Plate. Rotary Tables 4 (100mm). Table graduated in 360 Degrees. The scale calibrated in 5 degree increment. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. 4 Jaw Self Centering Chuck 2.55 (65mm) Dia M14X1 Threaded. 65mm Self Centering Chuck 4 Jaw. Jaws are made of tool steel, hardened & ground. Body is made of graded cast iron. KIT INCLUDES : ROTARY TABLE + CHUCK + BACKPLATE + T-NUTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. The item “Rotary Table Horizontal And Vertical 4100mm With 65mm 4 Jaw Chuck & Backplate” is in sale since Saturday, January 9, 2021. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in New Delhi. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Tilting: No
- Chuck’s Back-Thread::: M14x1
- Rotary Table Graduate:: 360 Degree
- FREE SHIPPING:: GERMANY, FRANCE, SPAIN, ITALY, UK
- Threaded:: M14x1
- Packing:: Hard board box
- Rotary Table Slots:: 4
- Rotary Table Dia:: 4″ (100mm)
- MPN: Does Not Apply
- Rotary Table Height: 2-1/16″ (52mm)
- Chuck type:: Reversible 4 Jaw Self Centering Chuck 65mm
- Brand: A V-1
Rotary Table Horizontal and Vertical 4 100mm With 65mm 3 Jaw Chuck & Backplate
4 (100mm) Rotary Table + 3 Jaw. (65mm) Self Centering Chuck + Back Plate. Rotary Tables 4 (100mm). Table graduated in 360 Degrees. The scale calibrated in 5 degree increment. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. 3 Jaw Self Centering Chuck (65mm) Dia. 65mm Self Centering Chuck 3 Jaw. Jaws are made of tool steel, hardened & ground. Body is made of graded cast iron. KIT INCLUDES : ROTARY TABLE + CHUCK + BACKPLATE + T-NUTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. The item “Rotary Table Horizontal and Vertical 4 100mm With 65mm 3 Jaw Chuck & Backplate” is in sale since Saturday, January 9, 2021. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in New Delhi. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Rotary Table Graduated:: 360 Degrees
- Packing:: Hard Board Box
- Rotary Table Height::: 2-1/16″ (52mm)
- Rotary Table Slots:: 4
- Rotary Table Dia:: 4″ (100mm)
- Chuck type:::: Reversible 3 Jaw Self Centering Chuck 65mm
- Chuck’s Back-Thread:: M14x1
- MPN: Does Not Apply
- FREE SHIPPING:: GERMANY,FRANCE,SPAIN, ITALY, UK,
- Brand: A V-1
4 ROTARY TABLE 100MM SELF CENTERING 3JAW CHUCK with TAILSTOCK & CLAMPING KIT
Rotary Table 4 with 100 mm Self-Centering Chuck & Backplate. Our 4 (100 mm) Rotary Table is Designed for smaller milling machines. Table diameter 100 mm. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. 100 mm Self Centering Chuck & Backplate. A high Quality 100 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate & fixing tee nuts with screws. (though the picture is not showing the same). Designed to fit our 3 or 4 Rotary table with either 3 or 4 slots. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play. This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is Required. These are adjustable for different hieghts & also having fine feed centre point and the centre tip is hardend and Ground. It is made up of good grade of cast iron. It is Very useful product to use. CLAMPING KIT M 6. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “4 ROTARY TABLE 100MM SELF CENTERING 3JAW CHUCK with TAILSTOCK & CLAMPING KIT” is in sale since Wednesday, February 24, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
Rotary Table 3 Inch 80 mm 4 Slot With 65 mm Mini Lathe Chuck For Milling Machine
Rotary Table 3 Inch with 65 mm Chuck. 3 Inch Rotary Table Horizontal And Vertical. Table graduated 360 degrees, Nice smooth rotation. Vertical centre height 44 mm, in 4 Slots. Regular 80 mm horizontal/ vertical Rotary Table complete. One turn = 10 degrees. Supplied with 65 mm Self Centering Chuck & 80 mm Backplate. Contra rotating rapid jaw adjustment mechanism. Quality 3 jaw self centering chuck 65 mm Diameter. Supplied complete with a key as well as set of tee nuts and studs to secure it into place. Backplate is drilled and counterbored to fit a range of 3 and 4 Inch rotary tables with 3 Slots or a 4 Slots. Backplate Threaded: 14 x 1. The item “Rotary Table 3 Inch 80 mm 4 Slot With 65 mm Mini Lathe Chuck For Milling Machine” is in sale since Wednesday, January 6, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “machinetoolsindia” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Backplate Threaded: 14 x 1
- Brand: European Machinery
- Chuck Size: 65 mm
- Country/Region of Manufacture: India
- Cross-Slide: No
- Custom Bundle: No
- Jaws: 3
- MPN: RT3
- Modified Item: No
- Operation: Manual
- Rotary Table Size: 3 in
- Setting Position: Horizontal/Vertical
- Slots: 4
- Tilting: No
4/ 100 Rotary Table & Small Chuck & Fixing T Nut Bolts Milling Indexing Table
(65 MM 3 JAW SELF CENTERING CHUCK). Quality Tool Set of 4 Regular Rotary Table with a Chuck with Back Plate & fixingsT nut Bolts. Chuck Body is High Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table. It can be mounted both in Horizontal & vertical position. Hand wheel is graduated in divisions of 10 min & can be set to zero. (WITH 70 MM 4 JAW INDPENDENT CHUCK). Quality Tool Set of 4 Regular Rotary Table with a 70 MM 4 Jaws independent Chuck with Back Plate & fixingsT nut Bolts. TO USA AND WORLDWIDE. The item “4/ 100 ROTARY TABLE & SMALL CHUCK & FIXING T NUT BOLTS MILLING INDEXING TABLE” is in sale since Thursday, February 4, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tools-shop2020″ and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
Yuasa 550-007 Rotary Indexer Super Spacer 3 Jaw Chuck. 8, Vertical/horizontal
YUASA 550-007 ROTARY INDEXER SUPER SPACER 3 JAW CHUCK. Chip by middle in one spot as well as smaller chunk missing by middle in another spot. Attention ALL NEW JERSEY BUYERS NO NJ DELVIERY. New Castle Delaware Location. Our apologies for any inconvenience. Buyers wishing to change their minds post valid sale, Will Not be. Photographic evidence of defect or basis for return must be submitted on same day. Kindly do not return item until your request has been approved. We no longer allow buyers to send their own carriers. We Need to know the following. Fork Lift or Loading Dock. A forklift at a home based business would still be considered a. Based on that information. There may be other options. We are happy to help you keep costs down by. Buyers agree to mark an item received when they/their agent has taken possession. Property not picked up within 10 days of sale will be considered abandoned. Warehouse Zip Code: 19720. Forklift & Loading Dock Available. Pick-Up: Monday -Friday 8:00a-4:00p. The item “YUASA 550-007 ROTARY INDEXER SUPER SPACER 3 JAW CHUCK. 8, VERTICAL/HORIZONTAL” is in sale since Friday, March 19, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “trfsurplus” and is located in Woodstown, New Jersey. This item can be shipped to United States.
- Setting Position: Horizontal/Vertical
- MPN: 550-007
- Brand: Yuasa
Bison 6 Horizontal/vertical Super Spacer Rotary Indexer 6 3 Jaw Chuck Rev Jaws
BISON 6 HORIZONTAL/VERTICAL SUPER SPACER ROTARY INDEXER/Key. 3 JAW CHUCK REVERSIBLE. JAWS VERY GOOD CONDITION. The item “BISON 6 HORIZONTAL/VERTICAL SUPER SPACER ROTARY INDEXER 6 3 JAW CHUCK REV JAWS” is in sale since Sunday, March 28, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “strongarmtooling” and is located in North Chelmsford, Massachusetts. This item can be shipped to United States.
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Brand: Bison
Rotary Table 4/100mm With 50mm Mini Scroll Lathe Chuck & Single Bolt Tailstock
Rotary Table Horizontal & Vertical 4 / 100 mm with. 50 mm Lathe Chuck & Back plate for Milling Machine. Vertical center Height : 2-1/16 (Approx 51 mm). Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. Calibrated in 5 Min Increment around the rim. Can be used both Vertical & Horizontal. SINGLE BOLT TAILSTOCK SUITABLE FOR ROTARY TABLE 3″ / 4″. This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. The item “ROTARY TABLE 4/100MM WITH 50MM MINI SCROLL LATHE CHUCK & SINGLE BOLT TAILSTOCK” is in sale since Saturday, March 6, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolsforexperts” and is located in Delhi. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Tilting: No
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Unbranded