horizontal
Iglobalbuy Automatic Self-Leveling Rotating Horizontal & Vertical Rotary Laser








Iglobalbuy Automatic Self-Leveling Rotary Laser Rotating Horizontal & Vertical Laser Level Kit 500M w/Remote Control + Receiver, Leveling Transit Laser Level Red Beam for Construction (Rotary Laser). High Performance Sensor? Equipped with 4 remote control light receiving parts, our Iglobalbuy rotary laser level is 360° rotatable and has the function of 5° automatic alignment. IP54 dustproof and waterproof design, it will not cause any problems even in harsh environments. Automatic Alignment and Adjustable Speed? This self-leveling rotary laser level can align automatically. In self-leveling mode, when the laser exceeds the self-leveling range (±5°), the line laser level beeps and the beam flashes quickly. The scanning speed can be adjusted at 0, 60, 120, 300 and 600rpm. For both vertical and horizontal use. 500m Beam Visibility? Exterior working range can be up to 500m diameter with detector; Red beam has strong stability, low power consumption and high cost performance. Red beam is more suitable for indoor use. Rotary Laser Level for Construction? This rotary laser level set includes the rotary laser, laser receiver, remote control, laser, glasses and carrying case. Equipped with remote controller for one person operation with an operating distance of approx. 30m indoor or 15m outdoor. Come with a pair of laser glasses to protect the operator’s eyes and easily see the laser in the strong sunlight. Strong black carrying case with foam for safe organization and easy carrying. Wide Application? The rotating laser transit level is suitable for construction, grading decoration, decoration, equipment installation, quality inspection and engineering supervision and other industries. Widely used indoor and outdoor applications; leveling, checking cut and fill, setting foundations and footings, concrete pours, etc.

HV6 Rotary Table 6 Inch -150 mm 3 Slot Horizontal & Vertical





Manufactured from High grade seasoned casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1, which mean 1 handle rotation will move the table by 4 Degrees. T Slot 16 mm. Table is graduated 360 degree around its circumference. Can be clamped vertically and horizontally both ways. Horizontal Height : Approx 80mm from Base to Top surface of Chuck. Centre Height in Vertical Position: 105 mm. Table Graduated 360 Degrees, Resettable Dial & Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds. 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. We offer compatible dividing plates, tailstock, chucks and clamp kit sets as well for this Rotary table. If you need one, pls check out our store to check them out. Vices & Work Holding. Measuring Tools & Equipments. Jewellery & Watch Making&########x9. Do It Yourself (DIY Tools)&########x9. HSS Cutting & Finishing Tools. Rotary Table HV6 (6 Inch -150 mm) 3 Slots USA FULFILLED. SEE OUR OTHER ITEMS FOR SALE. 50 mm/ 2 Inches Quick Release Steel Vise for Micro Milling Drill USA FULFILLED. Mini Vertical Slide (90 x 50 mm) for instant Milling Lathe Tool- (USA FULFILLED). Rigit Tailstock Die Holder for threading on Lathe Machine Tool (USA FULFILLED). ER-20 Collet Adapter for Instant Milling-Fits to 3″75 mm/ 4″ 100MM-USA FULFILLED. MT4 Triple Bearing Lathe Revolving Center For Metalworking-Under 5 Micron USA. 70 mm 4 Jaws Independent Chuck with Back Plate Milling Lathe Tool USA FULFILLED. Caste Iron 100 mm/ 4 Stepped Angle Plate Milling Machine Lathe USA FULFILLED. New Tool Post Mini Vertical Slide with 2 50 mm Steel Vice Milling USA FULFILLED. V Block Jig Fixture for Center Drilling on a Round Work-piece 2 (USA FULFILLED). 35mm Engineer Easy Bell Punch Hand DIY Tool Find Center Round Bar-USA FULFILLED. Caste Iron Small 1.5 Inches (38 mm) Jaw width Drill Press Vice Vise Machine. Caste Iron 100mm Round Vice for 4 (100mm) Rotary Table+M6 T-nut (USA FULFILLED). You will be glad to know that our tools are being manufactured in our own production facility in New Delhi (India) and are being inspected to ensure that they meet the required International quality benchmark as well as the expectations of our customers. We hold the Inventory of our good sellers in the USA & UK to offer the quickest possible deliveries to our customers. Pls note:- 1/. It is important to note that after the pandemic, although the logistic services have been improved a lot. However, they are still to reach their original positions. We expect our customers to understand and support us in such issues which are unforeseen and not in our control. However, we take complete onus and responsibility of supplying you with a completely brand-new product without any manufacturing or transit damage. Though we packed our goods with utmost care and strong packaging material, since our products are heavy, there could be transit damage in a few cases. However, it has been seen that such issues are not always a problem and our customers could still use them. In the majority of the cases, we have experienced that we manage to resolve the issue amicably without any trouble. So a discussion is the best way of a desired resolution. Listing and template services provided by inkFrog.

New Rotary Table 4 / 100mm Horizontal & Vertical with 80mm 3jaw Self centering






New Rotary Table 4 / 100mm Horizontal & Vertical with 80mm 3jaw Self centering. Rotary Table 4/100mm. Chuck Diameter 4? (100 mm). Vertical Center Height 2-1/16? Approx. Hand Wheel can be set to zero. Hand Wheel graduated in 10 min divisions. Cali berated in 5 min increment around the rim. Can be used both Horizontally & Vertically. 80mm 3 Jaw self centering Chuck. Chuck Size:- 80mm. 2 Kgs / 4.4 Lbs. Suitable For:- 4/100 MM Rotary Table.

New Rotary Table 4 / 100mm Horizontal & Vertical with 80mm 3jaw Self centering






New Rotary Table 4 / 100mm Horizontal & Vertical with 80mm 3jaw Self centering. Rotary Table 4/100mm. Chuck Diameter 4? (100 mm). Vertical Center Height 2-1/16? Approx. Hand Wheel can be set to zero. Hand Wheel graduated in 10 min divisions. Cali berated in 5 min increment around the rim. Can be used both Horizontally & Vertically. 80mm 3 Jaw self centering Chuck. Chuck Size:- 80mm. 2 Kgs / 4.4 Lbs. Suitable For:- 4/100 MM Rotary Table.

HV6- 6 (150mm) 4 slots Rotary Table Horizontal Vertical for Milling Machine





HV6- 6 (150mm) 4 slots Rotary Table Horizontal Vertical for Milling Machine. Manufactured from High grade seasoned casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1 Center Bore MT-2 T Slot 16mm. Horizontal Height : Approx 80mm from Base to Top surface of Chuck Satin Chrome Dials. This will fit both the Horizontal & Tilting model of HV4 & HV6 Rotary Tables This Set includes Following: 2 x step blocks 2 x tee bolts with flanged nut 2 x clamps Bolt Thread M8.

Rotary Table 4/ 100 mm Tilting Horizontal And Vertical



Precision Tilting Rotary Table Features to tilts between 0- 90 Degrees & can be locked at any working position. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Hand wheel is graduated in divisions of 10 min & can be set to zero. Provided with oil nipple for oiling of inside body. Center Height in horizontal position when lay flat : 2-3/4 (70 mm approx). Center Height in vertical position: 3 Inch approx (77 mm). Can be clamped vertically and horizontally both ways. Body & table are made of caste Iron. Rest of the parts are made of tool steel. Body is painted black. Knobs, dials and locking screws are all plated and Rest of the working surface are precisely ground. Rotary’s handle are knurled for firm gripping while rotating and epoxy black finish for a long rust free life. Base Dimensions : 142 x 128 mm. 2 Opposite counter drills of 9.5 mm diameter are located at a PCD of 102 mm approx for mounting. Condition : Wrong product or damaged product delivered.

Rotary Table 3 80mm Precision for Milling Machine Horizontal & Vertical 4 Slots






3 80mm ROTARY TABLE HORIZONTAL / VERTICAL WITH 4 MILLING SLOTS. Table Height : 44mm (1-5/8). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments.

Shars 14 High Quality Horizontal Vertical Rotary Table 4 MT+ Cert. New











Shars 14 High Quality Horizontal Vertical Rotary Table 4 MT+ Certification New. Without coolant pathway on rotary table base to catch the coolant. Maximum load weight in Horizontal position: 660 Lbs. Maximum load weight in Vertical position: 330 Lbs. 10 second vernier reading. Gear drive immersed in oil. Extra deep coolant channel. Dual positive action locks. Maximum individual spacing error 4″ table 120″, 6″ table 80″, 8, 10, 12, 16″ tables 60″. 4 table utilizes low profile locks for added workspace. Gear ratio: 4″ table is 72:1; 6-16″ tables are 90:1. Flatness of clamping service-concave. Concentricity of center bore. Parallelism of clamping surface to angle face. Squareness of angle surface to clamping surface. Squareness of clamping surface to center slot. If you need to speak to a sales person feel free to call. We are open Monday through Friday 8:30 to 5:00 cst.

HV6- 6 (50 mm) Rotary Table 3 Slots Horizontal Vertical for Milling Machine









HV6- 6 (50 mm) Rotary Table 3 Slots Horizontal Vertical for Milling Machine. HV6 Rotary Table, Dividing Plate, Rotary Table Diameter :150 mm (6″) Overall Height : 80 mm (3-1/4″) Centre Height in Vertical Position: 105 mm Worm- Gear Ratio- 1:90, which means that the 1 handle rotation shall turn the table by 4 Degrees. Table Graduated 360 Degrees, Resettable Dial & Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds. Centre Bore of the Table: 2MT 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. Supplied with Dividing Plate Set for Indexing for a total Indexing solution. Safety & Operation manual is also supplied.

Rotary Table 4/ 100 mm Precision For Milling Machine Horizontal And Vertical




Table Height : 2-1/16 (52 mm). Can be used in both horizontal & vertical position. Table graduated in 360 Degrees. The scale calibrated in 5 degree increment. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Condition : Wrong product or damaged product delivered.
