plate
Hv6 Rotary Table(4 Slot) With Indexing Plate Set & 150mm 4jaw Independent Chuck
Precision Rotary Table 6/150mm. With Dividing Plate Set &. 150mm 4 Jaw Independent Chuck. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. T Slot 16 mm. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. 150 mm Independent Chuck & Backplate. A high Quality 4 Jaw Independent chuck, the body of chuck is made from SG Iron & Jaws are of Tool steel hardened & ground. Same Jaws are reversible as well. We reply within 24 hours. Thanks for Visiting our Store. The item “HV6 ROTARY TABLE(4 SLOT) WITH INDEXING PLATE SET & 150MM 4JAW INDEPENDENT CHUCK” is in sale since Wednesday, October 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
New Rotary Table 8/ 200mm kit, Dividing Plate Set, Tail Stock & Clamps
Integrates of Rotary Kit. Rotary Table 8 / 200 mm. Tail stock which is suitable for Rotary Table. Weight :- 42 Kgs / 92.4 Lbs. Gear Ratio:- 90:1. Made of ductile cast iron and precision ground The worktable is graduated to a full 360° MT 3 centre for holding work pieces worm gear ration is 90:1 making one turn of the handle move the table 4 degrees vernier scale makes setting down to 10 secs possible quick release system for manual indexing. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular tool path, on small milling machines. To cut straight lines &. Height can be varied while working with different index centres while the angle of inclination can be changed for various machining applications. The tip of centre is finely rotatable. The dead centre of the tail stock should be in line with the centre of the rotary table. Tail stock suitable for 8/200 mm Rotary Table. 8 / 200mm. 4.3/4 / 120mm. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a rotary table. On a milling machine. Usually used to apply support to the longitudinal rotary. Axis of a work piece being machined. Centre is mounted in the tail stock, and inserted against the sides of a hole in the centre of the work piece. A tail stock has a Dead Centre, while. A Tail stock is particularly useful when the work piece is relatively long and slender. The divisions of preset holes are provided for the most common angles such as 30, 45 and 90. The remaining divisions of the circle are provided for manually rotating the dividing arm using the plates. The colour of item can be vary depend upon availability. The item “New Rotary Table 8/ 200mm kit, Dividing Plate Set, Tail Stock & Clamps” is in sale since Friday, March 15, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped worldwide.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Country/Region of Manufacture: India
- Operation: Manual
- Weight of Kit: 42 Kgs / 92.4 Lbs
- Brand: Unbranded
Hv4 Rotary Table (4 Slot) With Tailstock & Indexing/dividing Plate Set
Rotary Table HV4 4 Slot. With Tailstock & Dividing Plate. High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 110 mm, Table Height 80 mm, Center Height 80 mm. Center Has a MT-2 Taper, Worm Gear Is 90-1. Vernier Scale Calibrated To 10 Seconds. Quick Release System for Manual Indexing. And Has 4 Tee Slots. Supplied with Dividing Plate Set for Indexing & a Tailstock for a total Indexing solution. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. This Combination completes with TAILSTOCK, it is USED BETWEEN CENTER to Center WORK IS REQUIRED. It is ADJUSTABLE FOR DIFFERENT HEIGHTS 80 mm TO 110 mm. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “HV4 ROTARY TABLE (4 SLOT) WITH TAILSTOCK & INDEXING/DIVIDING PLATE SET” is in sale since Thursday, October 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
Rotary Table Hv4 (4 Slot) With Dividing Plate Set
ROTARY TABLE HV4 WITH INDEXING PLATE SET FEATURES. High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 110 mm, Table Height 80 mm, Center Height 80 mm. Center Has a MT-2 Taper, Worm Gear Is 90-1. Vernier Scale Calibrated To 10 Seconds. Quick Release System for Manual Indexing. And Has 4 Tee Slots. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. The item “ROTARY TABLE HV4 (4 SLOT) WITH DIVIDING PLATE SET” is in sale since Wednesday, February 24, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
6 Rotary table Horizontal & Vertical (3 Slots) WithDividing/Indexing Plate set
Precision Rotary Table 6/150mm. With Dividing Plate Set. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. T Slot 16 mm. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. The item “6 Rotary table Horizontal & Vertical (3 Slots) WithDividing/Indexing Plate set” is in sale since Friday, November 6, 2020. This item is in the category “Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “easystreet_hangout” and is located in DASNA, UTTAR PRADESH. This item can be shipped worldwide.
- Operation: Manual
- Modified Item: No
- MPN: Does Not Apply
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Cross-Slide: No
- Tilting: No
- Brand: Unbranded
- Country/Region of Manufacture: India
VERTEX HV-6 (4-Slot) 6 Horizontal/Vertical Rotary Table with 4-Slot Face Plate
VERTEX HV-6 (4-Slot) 6 Horizontal/Vertical Rotary Table with 4-Slot Face Plate. Vertex HV-6 Horizontal/Vertical Rotary Table Special order with 4-slot face plate. Our Tables are made of high density Meehanite and use “HEIDENHAIN” electronic equipment to inspect angle to assure the excellent quality and durableness. Use excellent machining center to process. Spindle end be applied accuracy bearing. Can be assured to keep very steady under load cutting. Worm is hardened and ground. The ratio is 90:1. The work table is graduated a full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1’min. And vernier scale makes settings down to 10 seconds possible. These Rotary Tables are popular for their excellent performance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work. Using the Key guide block, the center can be corrected quickly and accurately. If You have any questions regarding this item, please let us know we’ll be happy to help. The item “VERTEX HV-6 (4-Slot) 6 Horizontal/Vertical Rotary Table with 4-Slot Face Plate” is in sale since Friday, February 5, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped worldwide.
- Brand: VERTEX
- MPN: HV-6-4-SLOT
- Country/Region of Manufacture: Taiwan
- Model: HV-6-4-SLOT
3/ 80 mm Regular Rotary Table & 80 mm Independent 4 Jaw Chuck+Back Plate
SET OF HIGH PRECISION QUALITY 3/ 80 mm ROTARY TABLE & 80 MM 4 JAW CHUCK. TABLE DIAMETER 3/80 MM HORIZONTAL / VERTICAL CLAMPING. TABLE CALIBRATED 0-360 DEGREES TABLE 36-1 RATIO, WHICH MEANS ONE TURN OF THE HANDLE ROTATE 10 DEGREE OF THE TABLE. SUPPLIED WITH A 80 MM 4 JAWS INDEPENDENT CHUCK WITH BACK PLATE & FIXING T NUTS. The item “3/ 80 mm Regular Rotary Table & 80 mm Independent 4 Jaw Chuck+Back Plate” is in sale since Thursday, November 26, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “globaltools2016″ and is located in Delhi, Delhi. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
Rotary Table HV4 with 80 mm Chuck, Backplate, Tailstock & Indexing Plate Set
With 80 mm Self Centering Chuck, Backplate. Tailstock for HV4 and HV6 & Indexing Plate Set. Rotary Table HV4 with 80 mm Self Centering Chuck & Backplate. Our Rotary Table HV4 is having a Table Diameter : 110 mm (4-3/8). Table Height: 80 mm (3 -1/8). Worm Gear Ratio – 1:90, which means that 1 handle rotation shall turn the table by 4 Degrees. Centre Bore of the Table MT2. Table Graduated 360 Degrees. Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds. 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. It is combined with a high Quality 80 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate, fixing tee nuts with screws, 80 mm Self Centering Chuck, Tailstock for HV4 and HV6, & Indexing Plate Set. Designed to fit our 3 or 4 Rotary table with either 3 or 4 slots. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play. Fit to our HV4 and HV6, Tilting Rotary Tables 100 mm. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. Tailstock for HV4 & HV6. Its made of good Quality of Cast Iron. Height is adjustable from 80 mm to 110 mm. It is used on our HV4 & HV6 ROTARY TABLE. It is USED WHEN BETWEEN CENTRE WORK IS REQUIRED. THESE ARE ADJUSTABLE FOR DIFFERENT HEIGHTS & Having fine feed centre point and the centre tip is hardened and Ground. The item “Rotary Table HV4 with 80 mm Chuck, Backplate, Tailstock & Indexing Plate Set” is in sale since Monday, August 3, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “proffesional_tools” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Tilting: No
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Country/Region of Manufacture: India
- Operation: Manual
- Brand: Unbranded
- Cross-Slide: No
3rotary Table With Suitable(50mm-4jaw Self Chuck)+back Plate +t-nuts+ Tailstock
A PERFECT MILLING COMBO FOR YOUR SMALL MILLING MACHINE NEEDS. SET INCLUDES A LOW PROFILE 80 MM DIAMETER ROTARY TABLE, 1 SET OF 50 MM CHUCK 4 JAWS SELF CENTERING W/ BACK PLATES & T NUTS BOLTS WITH A SUITABLE TAILSTOCK. THE ROTARY TABLE AND CHUCK ASSEMBLY CAN BE MOUNTED BOTH HORIZONTALLY & VERTICALLY. WORM : GEAR RATION IS 1: 10, THAT MEANS ONE HANDLE ROTATION TURNS THE 360 DEGREES GRADUATION TABLE BY 10 DEGREES. 5OMM SELF CENTERING CHUCK THREAD(M14 X 1). Rotary Table 3 (80 MM). Chuck Diameter 3 (80 mm). Vertical center height 44 mm, in 4 Slots. Hand Wheel can be set to zero. Hand Wheel graduated in 10 min divisions. Cali berated in 5 min increment around the rim. Can be used both Horizontally & Vertically. SINGLE BOLT UNIVERSAL TAILSTOCK FOR 3″ & 4″ ROTARY TABLE. This Universal Tailstock for 3″ & 4″ vertical rotary tables features adjustable center height and center travel. This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. The item “3ROTARY TABLE WITH SUITABLE(50MM-4JAW SELF CHUCK)+BACK PLATE +T-NUTS+ TAILSTOCK” is in sale since Sunday, August 9, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “bluefox_tools” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Brand: BLUEFOX
- Tilting: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
TROYKE 9 HORIZONTAL / VERTICAL ROTARY TABLE #U-9 with Aluminum Tooling Plate
TROYKE 9 HORIZONTAL / VERTICAL ROTARY TABLE – #U-9. Includes Aluminum Tooling Plate. Condition is “Used in good condition”. The item “TROYKE 9 HORIZONTAL / VERTICAL ROTARY TABLE #U-9 with Aluminum Tooling Plate” is in sale since Wednesday, January 20, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “artgeak” and is located in Lompoc, California. This item can’t be shipped, the buyer must pick up the item.
- Brand: Troyke
- Setting Position: Horizontal/Vertical
- MPN: 4215-9