rotary
Lathe Tailstock For Rotary Table With Indexing Plates For HV4 And HV6 Rotary Tab
The Set is Suitable for Rotary Table HV4 & HV6. HOLE PLATE A: 15, 16, 17, 18, 19, 20. HOLE PLATE B :21, 23, 27, 29, 31, 33. HOLE PLATE C: 37, 39, 41, 43, 47, 49. Set of 3 Plates. Made up of good Quality Cast Iron. Adjustable Height from 80 mm to 110 mm. It is used on our HV4 & HV6 ROTARY TABLE. It is used when between center work is required. These are adjustable for different heights and having fine. The item “Lathe Tailstock For Rotary Table With Indexing Plates For HV4 And HV6 Rotary Tab” is in sale since Saturday, February 15, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “machinetoolsindia” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Adjustable for: Different heights and having fine.
- Tailstock for Rotary Table: HV4 and HV6
- Adjustable Height from: 80 mm to 110 mm
- HOLE PLATE A: 15, 16, 17, 18, 19, 20
- HOLE PLATE B: 21, 23, 27, 29, 31, 33
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- HOLE PLATE C: 37, 39, 41, 43, 47, 49
- Set is Suitable for: Rotary Table HV4 & HV6
- No. of Plates: 3
- Made up of: Good Quality Cast Iron
- Operation: Manual
- MPN: TSFRTAWIP-2
- Brand: European Machinery
Rotary Table 4 or 100mm For Milling Machine 3 slot Tilting Premium Quality
Precision Mini Rotary Table 4 Inch or 100 mm is manufactured from Seasoned casting. Vertical center Height : 2-1/16. Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. In 3 Slots so you can put you Chuck on its easily. 3 T Slots for fixing work to easily clamp chucks. Can be used both Vertically & Horizontally. A Precision work positioning device used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Rotary tables are most commonly mounted “flat”, with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it “flat” on a 90° angle plate), so that it rotates about a horizontal axis. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. We ensure the product reaches you at the earliest. The item “Rotary Table 4 or 100mm For Milling Machine 3 slot Tilting Premium Quality” is in sale since Tuesday, July 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial-tools” and is located in Jhilmil Industrial Area Delhi. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: Yes
- MPN: Does Not Apply
- Brand: Unbranded
Indexing 4100 MM Rotary Table Horizontal Vertical+ T Nut Bolts+80 MM Round Vice
4 (100 mm) Rotary Table Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. DETAILS OF ROUND VICE. 80 mm Round Vice – Made of high grade close grain caste Iron. Designed to fit our 3″ (75 mm) & 4″ (100 mm) Rotary Tables. The moving jaw has V-grooves to hold Round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Diameter of Base : 80 mm. Jaw Width : 54 mm. Jaw Depth: 20 mm. Jaw Opening : 32 mm. The item “INDEXING 4100 MM ROTARY TABLE HORIZONTAL VERTICAL+ T NUT BOLTS+80 MM ROUND VICE” is in sale since Tuesday, June 12, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tools4every1″ and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- Bundle Listing: No
- Country/Region of Manufacture: India
- MPN: Does Not Apply
- Brand: Unbranded/Generic
VERTEX HV-12 12 Horizontal / Vertical Rotary Table with Face Plate
VERTEX HV-12 12 Horizontal / Vertical Rotary Table with Face Plate. HV-12 In wooden crate. If You have any questions regarding this item, please let us know we’ll be happy to help. The item “VERTEX HV-12 12 Horizontal / Vertical Rotary Table with Face Plate” is in sale since Tuesday, July 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped to United States.
- Brand: VERTEX
- MPN: HV-12
- Country/Region of Manufacture: Taiwan
- Manufacturer: VERTEX
- Model: HV-12
4 ROTARY TABLE WITH CLAMPING KIT M6 (Can be used both Vertically& Horizontally)
4 ROTARY TABLE WITH CLAMPING KIT M 6. Chuck Diameter : 100 mm / 4. Vertical center Height : 2-1/16. Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. Can be used both Vertically & Horizontally. CLAMPING KIT M 6. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “4 ROTARY TABLE WITH CLAMPING KIT M6 (Can be used both Vertically& Horizontally)” is in sale since Friday, April 27, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “zapactools” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- MPN: Does Not Apply
- Brand: Unbranded/Generic
VERTEX HV-6 (4-Slot) 6 Horizontal/Vertical Rotary Table with 4-Slot Face Plate
VERTEX HV-6 (4-Slot) 6 Horizontal/Vertical Rotary Table with 4-Slot Face Plate. Vertex HV-6 Horizontal/Vertical Rotary Table Special order with 4-slot face plate. Our Tables are made of high density Meehanite and use “HEIDENHAIN” electronic equipment to inspect angle to assure the excellent quality and durableness. Use excellent machining center to process. Spindle end be applied accuracy bearing. Can be assured to keep very steady under load cutting. Worm is hardened and ground. The ratio is 90:1. The work table is graduated a full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1’min. And vernier scale makes settings down to 10 seconds possible. These Rotary Tables are popular for their excellent performance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work. Using the Key guide block, the center can be corrected quickly and accurately. If You have any questions regarding this item, please let us know we’ll be happy to help. The item “VERTEX HV-6 (4-Slot) 6 Horizontal/Vertical Rotary Table with 4-Slot Face Plate” is in sale since Tuesday, July 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped worldwide.
- Brand: VERTEX
- MPN: HV-6-4-SLOT
- Country/Region of Manufacture: Taiwan
- Model: HV-6-4-SLOT
11 Moore Rotary Table Special LRT 391 With Wooden Cabinet & Accesories
11 Moore Rotary Table Special LRT 391 With Wooden Cabinet & Accesories. The wooden case has some wear, top of the case has a crack that was repaired and alot of cosmetic imperfections, the rotary table itself is in good working condition. With some paint chips and writing on the side. THANK YOU FOR SUPPORTING SMALL BUSINESS! The item “11 Moore Rotary Table Special LRT 391 With Wooden Cabinet & Accesories” is in sale since Wednesday, July 8, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “the*treasure*trove*” and is located in Framingham, Massachusetts. This item can be shipped to United States.
- Brand: Moore
- Operation: Manual
- Tilting: No
- Country/Region of Manufacture: United States
- Setting Position: Horizontal/Vertical
- Cross-Slide: No
- MPN: Does Not Apply
ROTARY TABLE 3-4 slots with 2.1/2 SELF CENTRING CHUCK HORIZONTAL VERTICAL
3- 75 MM. HIGH QUALITY ITEM Precision 3 Tilting Rotary Table supplied with Mounting Back Plate and 65 mm 3 Jaw Self centering Lathe chuck. The Rotary Table can be tilting up to 90 degrees. Precision Mini Rotary Table 3 75 mm is manufactured from Seasoned casting. Precisely maintained Chuck Run Out and Bottom Surface for accurate work. Table graduated 0-360 degrees in 5 degree divisions. Winding handle is graduated 0-10 degrees in 5 minute divisions. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. Drilling or milling to polar co-ordinates and, when mounted vertically with a tail stock they can be used to machine shafts or spindles. The versatile units can also be used on drilling, boring or slotting machines permitting an even greater range of operations. Machining – To establish the initial work piece position simply loosen the zero Collar locking handle and rotate the zero collar anti-clockwise for about half A turn. The worm is now disconnected from the worm wheel drive, the table is Free to turn independently to the crank handle and the work piece may now be Accurately aligned. To re-engage simply turn the zero collar in the clockwise Direction and re-tighten the locking handle. A rotary table can be used. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. TERMS & CONDITIONS. All our items are delivered to your doorstep. All items will reach you within 8 to 12 days, in most cases we have seen our customers receiving them within a week. We will try our level best to serve you excellent. We are a upcoming online retailer for Engineering Tools, Machine Tools Accessories, Cutting Tools, Measuring Instruments, Diamond Tools, etc. We have wide range of Engineering Supplies and We also make Tools as per specifications. We are here to serve you 24 x 7. The Items we supply are Quality and at low rates as we are manufacturing most of the items. The item “ROTARY TABLE 3-4 slots with 2.1/2 SELF CENTRING CHUCK HORIZONTAL VERTICAL” is in sale since Tuesday, May 12, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “quickfox_1820″ and is located in DELHI, DELHI. This item can be shipped worldwide.
- Brand: DUSHKA
- MPN: RT-3-75
- Model: RT-3-75TLT
- Country of Manufacture: India
- Country/Region of Manufacture: India
Horizontal Vertical Milling Indexing 4/100 Rotary Table & Small Chuck 65mm 3jaw
Description of 4 (100 mm) Rotary Table Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx) excluding chuck. Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. Description of the 65 mm 3 jaws self centering Chuck made from High Quality chuck, the body of which is made from SG Iron & Jaws are of Tool steel hardened & ground. Supplied with a mounting back plate & fixing tee nuts with screws. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table. The item “HORIZONTAL VERTICAL MILLING INDEXING 4/100 ROTARY TABLE & SMALL CHUCK 65MM 3JAW” is in sale since Thursday, May 9, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Chucks\Drill Chucks”. The seller is “toolswholesale” and is located in Delhi, Delhi. This item can be shipped worldwide.
- MPN: Does Not Apply
- Brand: Unbranded