table
Vertex HV10 10 inch 254mm Vertical/Horizontal Rotary Table



Vertex 10 inch Vertical / Horizontal Rotary Table. Hardened and Ground Worm. The ratio is 90:1. The work table is graduated a full 360 degrees so that one turn of the handle moves the table through 4 degrees. Mirco collar is graduated in steps of 1 minute, and the vernier scale makes settings down to 10 seconds possible. These Rotary Tables are popular for their excellent performance, practical design and reasonable cost, they are widely used for circular cutting work, angle setting, boring, spot facing and similar work. 6 Off Tee Slots 14mm Wide. The item “Vertex HV10 10 inch 254mm Vertical/Horizontal Rotary Table” is in sale since Tuesday, March 19, 2019. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “fordeight” and is located in West Midlands. This item can be shipped worldwide.
- Country/Region of Manufacture: Taiwan
- MPN: HV-10
- Brand: Vertex

Hv4 110 MM Diameter Horizontal Vertical Rotary Table For Milling Machine







Diameter of the Table is 110 mm, known as HV4 since it can be clamped both horizontally and vertically. Table Height: 80 mm (3 -1/8) Worm Gear Ratio – 1:90, which means that 1 handle rotation shall turn the table by 4 Degrees. Center Bore of the Table MT2 Table Graduated 360 Degrees. Handwheel graduated in seconds. 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. Vernier scale calibrated to 10 secondsquick release system for manual indexing. The item “HV4 110 MM DIAMETER HORIZONTAL VERTICAL ROTARY TABLE FOR MILLING MACHINE” is in sale since Friday, May 11, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tools4every1″ and is located in Delhi, Delhi. This item can be shipped worldwide.
- Bundle Listing: No
- Brand: Unbranded/Generic
- MPN: Does Not Apply
- Country/Region of Manufacture: India

Rotary Table 4 3 Slot with Tail Stock & Dividing Plates for Milling Machine













VERTICAL & HORIZONTAL- Our rotary table for milling machine is 4/100mm with 3 slots can be used in both horizontal and vertical positions, meeting two functions and also bringing you convenient as well as efficient milling experience. REMARKABLE QUALITY- Cast iron mainly used to cast parts subjected to pressure and vibration on mechanical equipment, offering rotary table for milling durability, shock absorption and heat-resistantance. The dial is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it possible to use it easily and conveniently. The precision rotary table indexing plate can be graduated 360 Degrees. With a set of wrench and set of screws, indexing plate set and a quality tailstock, it will be more convenient for you to operate this rotary table. MULTIPLE APPLICATION- The power milling machines are widely used in milling machine like index boring, milling, circle cutting, spot facing and boring hole and so on. Practical design can meet a variety of workshop work needs. Vertical & Horizontal Design. Both vertical and horizontal with two functions. Circle cutting, indexing drilling, milling and more complicated work are possible when the vertical position of the table is used together with the tail part. Milling table is of good casting performance like mill vise, shock absorption performance as well as high strength heat resistance. Just adjust the handle to the position where you want as the precise scale is marked on the dial. The dial is divided into 360 degrees in total. Clear scale is more convenient for you to operate it. With adjustable height which ranges from. 3.8-5.2inch (42-90mm). The quality tailstock will fit different size of rotary tables. Three dividing plate set(Plate’A’ – 15, 16, 17, 18, 19, 20 Plate’B’ – 21, 23, 27, 29, 31, 33 Plate’C’ – 37, 39, 41, 43, 47, 49). A set of wrench and screws are free for you with your installation. Rotary table milling machines are designed for milling, drilling, fixture boring and many common workshop applications. 4/100mm Rotary Table 3-Slot Rotary Table. The mill rotary table is one of the main accessories of milling machine. As a precision work positioning device, it is widely used for indexing drilling, milling, circumferential cutting, boring, etc. The rotary turn table for milling machine is made from casting with high quality, can work with a set of dividing plate and a tailstock. T-slot Diameter: 1/2inch 14mm. Table Dimension: 4inch (100mm). Tailstock Height Range: 3.8-5.2inch (42-90mm). Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. 37, 39, 41, 43, 47, 49. 1 x Rotary Table. 3 x Dividing Plates. 1 x A Set of Accessory. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “Rotary Table 4 3 Slot with Tail Stock & Dividing Plates for Milling Machine” is in sale since Sunday, January 19, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “love-happyshopping” and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.
- Brand: Vevor 1574659284369211
- MPN: XCXZZ00501574659284
- Operation: Manual
- Setting Position: Horizontal/Vertical
- Centre Bore: MT-2
- T-slot Diameter: 1/2inch (14mm)
- Table Dimension: 4inch (100mm)
- Tailstock Height Range: 3.8-5.2inch (42-90mm)
- Plate ‘A': 15, 16, 17, 18, 19, 20
- Plate ‘B': 21, 23, 27, 29, 31, 33
- Plate ‘C': 37, 39, 41, 43, 47, 49
- Paclage Content 1: 1 x Rotary Table
- Paclage Content 2: 3 x Dividing Plates
- Paclage Content 3: 1 x Tailstock
- Paclage Content 4: 1 x A Set of Accessory

12 Phase II rotary table horizontal and vertical





12 Phase II rotary table horizontal and vertical Condition is Used. The item “12 Phase II rotary table horizontal and vertical” is in sale since Tuesday, March 17, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “paulwil374″ and is located in Zanesville, Ohio. This item can’t be shipped, the buyer must pick up the item.
- Brand: Phase II
- Operation: Manual
- Custom Bundle: No
- Modified Item: No
- Tilting: No
- Setting Position: Horizontal/Vertical
- Cross-Slide: No

CNC ER40 Indexer Rotary Table





And COMPLICATED Operations, Indexing, or. Can be mounted/used in a Vertical or Horizontal position. The HQ Gates PowerGrip GT3 Driving Belt is set for? Has a 1.172 Diameter Thru Hole. That is huge for this size of Indexer Rotary Table! Standard 1 1/4-12 UNF Internal thread on the back end of the ER40 spindle to accommodate a STOP of your choosing for continued repeatable length/position control of your parts, a spider attachment, or whatever you would like to add to this threaded end. This CNC ER40 Indexer/Rotary Table can use any collet from ER8 (smallest) to ER50 (largest) using an ER straight shank Chuck. It can Accurately Index divisions that could not be indexed using a. Can also be programmed to easily index Splines, Gears, etc? Of pretty much any type, including synchronized rotation for helical milling, etc. Wired to plug straight in the famous Gecko G540? 4 axis driver or our listed STAND ALONE Programmable Controller. The ER40 collet system is a superior collet system for its “unrestricted diameter range and full collet clamping ability” standard ER40 diameter range from. 094″ to 1.024″. Oversize ER40 collets from 26mm (1.024″) up to a 32mm (1.260″) diameter. You can also use our Optional 5 Drive Plate System that can be screwed onto the ER40 nose to drive or hold whatever you want.. Adding a larger drive/indexing plate, or modify it to suit your unique application, etc.. The CNC ER40 Indexer Rotary Table was developed to get the most out of the STAND ALONE Programmable Controller that we also sell. It is wired to plug “directly in” the very popular Gecko G540 4 Axis Controller, or mated to any other suitable controller or drive of your choosing. The CNC ER40 Indexer/Rotary Table is powered by a Nema 34 stepper motor that is rated at 665 Oz. In. That’s impressive for this CNC ER40 Indexer/Rotary Table’s Fast Speed and Size and considering that there is nothing like it out there. We chose the ER40 collet spindle for the Indexer/Rotary Table because it is a Superior Collet System over others for many reasons. Here are some of the most important points. The ER collets can clamp “ANY” shaft diameter “EVENLY” over their full contact length and clamp range. The ER collets “Overlap” all shaft diameters in their diameter range, so no shaft diameters are left out. 5C collets and many others… Can only clamp at the collet tip. Issues when not clamping? They were/are designed for. This type of collet design system extremely limits the shaft diameters they can clamp. In our opinion… The ER Collet System is probably the most “Versatile”, “Affordable”, and “Popular” collet system to date. (1) CNC ER40 Indexer Rotary Table. (1) DB9 6′ Drive Cable. (2) ER40 Nose Wrenches. (2) FREE – Clamp Set. Please see our listing for the. STAND ALONE Programmable Controller. And 5 Drive Plate System that we also sell that will work with this Unit. Made and Coming to you from Canada! The item “CNC ER40 Indexer Rotary Table” is in sale since Sunday, February 16, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “allaces1″ and is located in Surrey, British Columbia. This item can be shipped worldwide.
- Country/Region of Manufacture: Canada
- Setting Position: Horizontal/Vertical
- Tilting: No
- Operation: CNC
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: CNC-Aid.com

6 Rotary table 3 SLOTS Horizontal & Vertical Precision Quality


Precision Rotary Table 6/150mm. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Graduated 360 degree around its circumference. The item “6 Rotary table 3 SLOTS Horizontal & Vertical Precision Quality” is in sale since Saturday, June 1, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “zealtools” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- MPN: Does Not Apply
- Brand: Unbranded

Rotary Table Hv5/ 125mm Horizontally And Vertically


ROTARY TABLE HV5 / 125MM. Rotary Table HV5 High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 125mm, Table Height 80mm, Centre Height 80mm. Centre Has a MT-2 Taper, Worm Gear Is 1:90. Vernier Scale Calibrated To 10 Seconds. Quick Release System for Manual Indexing. And Has 3 Tee Slots and also available 4 slot. The item “ROTARY TABLE HV5/ 125MM HORIZONTALLY AND VERTICALLY” is in sale since Wednesday, January 15, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “easystreet_hangout” and is located in DASNA, UTTAR PRADESH. This item can be shipped worldwide.
- Custom Bundle: No
- Cross-Slide: No
- Tilting: No
- Brand: Unbranded
- Setting Position: Horizontal
- MPN: Does Not Apply
- Country/Region of Manufacture: India

6 Rotary table 4 SLOT Horizontal & Vertical Precision Center Bore MT-2


Precision Rotary Table 6/150mm. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Graduated 360 degree around its circumference. ABOUT US We (Lifestyledealsworld) consistent focus on best quality India’s Manufactured Products leading brand in different categories Like: Spiritual, lifestyle & Health, Genuine Auto parts, Customize Vintage Auto Parts, Machinery & tool etc. These products are sourced from direct manufactures, using technologically advanced machines and quality testers for international markets. Quality of service and privacy of our customers is top most priority for us. The commitment of providing the excellent quality products to the clients made us a reputed exporter with many satisfied clients. Lifestyledealsworld The Best Deal. FEEDBACK We (Lifestyledealsworld) consider your feedback is as important as sale. Thank you for being a valued customer. Listing and template services provided by inkFrog. The item “6 Rotary table 4 SLOT Horizontal & Vertical Precision Center Bore MT-2″ is in sale since Wednesday, August 28, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “lifestyledealsworld” and is located in Delhi, Delhi. This item can be shipped worldwide.
- Brand: Unbranded/Generic
- MPN: TL02168
- Country/Region of Manufacture: India
- Model: 6″
- Type: Rotary Table
- UPC: Does not apply

Rotary Table 3 In With Rotary Table 4 In Horizontal And Vertical 4 Slot Table




ROTARY TABLE 3 Inch. 3 Rotary Table Horizontal & Vertical. Table graduated 360 degrees, Nice smooth rotation. Vertical centre height 44 mm, in 4 Slots. Regular 80 mm horizontal/ vertical Rotary Table complete. One turn = 10 degrees. ROTARY TABLE 4 Inch. Horizontal / Vertical Rotary Table. Table Diameter : 100 mm / 4. Vertical Centre Height 53 mm/. Table Graduated 0-360 Degrees. 4 Slot Rotary Table. Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. The item “Rotary Table 3 In With Rotary Table 4 In Horizontal And Vertical 4 Slot Table” is in sale since Saturday, November 2, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolsforworldwide” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Rotary Table Size: 3 And 4 Inch
- Slot: 4
- 3″ Height: 44 mm
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- 4″ Height: 53 mm
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Unbranded
