tailstock
ROTARY TABLE 3 / 75mm WITH TAILSTOCK & M6 CLAMPING KIT
ROTARY TABLE 3/75MM WITH. & M6 CLAMPING KIT. Precision Mini Rotary Table 3 75 mm is manufactured from Seasoned casting. Precisely maintained Chuck Run Out and Bottom Surface for accurate work. 4 T Slots for fixing work can be used with Clamping kit. Table graduated 0-360 degrees in 5 degree divisions. Winding handle is graduated 0-10 degrees in 5 minute divisions. This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. We reply within 24 hours. Thanks for Visiting our Store. The item “ROTARY TABLE 3 / 75mm WITH TAILSTOCK & M6 CLAMPING KIT” is in sale since Friday, October 9, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
3 80mm Rotary Table 70mm Chuck Tailstock M6 Clamp Kit Milling Machine Tools
A PERFECT MILLING COMBO FOR YOUR SMALL MILLING MACHINE NEEDS. SET INCLUDES A LOW PROFILE 80 MM DIAMETER ROTARY TABLE, 1 SET OF 70 MM CHUCK 4 JAWS INDEPENDENT DOG CHUCK W/ BACK PLATES & T NUTS BOLTS WITH A SUITABLE TAILSTOCK & M6 CLAMP KIT. THE ROTARY TABLE AND CHUCK ASSEMBLY CAN BE MOUNTED BOTH HORIZONTALLY & VERTICALLY. WORM : GEAR RATION IS 1: 10, THAT MEANS ONE HANDLE ROTATION TURNS THE 360 DEGREES GRADUATION TABLE BY 10 DEGREES. TO USA & WORLDWIDE. The item “3 80mm Rotary Table 70mm Chuck Tailstock M6 Clamp Kit Milling Machine Tools” is in sale since Saturday, January 2, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “globaltools2016″ and is located in Delhi, Delhi. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
Rotary Table 4 with 80mm Self Centering Chuck With Tailstock & Clamping Kit
Rotary Table Horizontal & Vertical 4 / 100 mm with. 80 mm Lathe Chuck & BackPlate for Milling Machine. Rotary Table has 4 Tee Slots. Vertical center Height : 2-1/16 (Approx 51 mm). Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. Calibrated in 5 Min Increment around the rim. Can be used both Vertical & Horizontal. This set includes 80 mm Self Centering Chuck with Backplate and mounting T-Nuts and Bolts. This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is Required. These are adjustable for different hieghts & also having fine feed centre point and the centre tip is hardend and Ground. It is made up of good grade of cast iron. It is Very useful product to use. CLAMPING KIT M 6. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “Rotary Table 4 with 80mm Self Centering Chuck With Tailstock & Clamping Kit” is in sale since Monday, November 9, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK
Rotary Table Horizontal & Vertical 4 / 100 mm with. 65 mm Lathe Chuck & Back plate for Milling Machine. Vertical center Height : 2-1/16 (Approx 51 mm). Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. Calibrated in 5 Min Increment around the rim. Can be used both Vertical & Horizontal. This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is Required. These are adjustable for different hieghts & also having fine feed centre point and the centre tip is hardend and Ground. It is made up of good grade of cast iron. It is Very useful product to use. The item “Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK” is in sale since Monday, November 9, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Other CNC, Metalworking & Manufacturing”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- MPN: Does Not Apply
- Country/Region of Manufacture: India
- Custom Bundle: No
- Brand: Unbranded
Hv4 Rotary Table (4 Slot) With Tailstock & Indexing/dividing Plate Set
Rotary Table HV4 4 Slot. With Tailstock & Dividing Plate. High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 110 mm, Table Height 80 mm, Center Height 80 mm. Center Has a MT-2 Taper, Worm Gear Is 90-1. Vernier Scale Calibrated To 10 Seconds. Quick Release System for Manual Indexing. And Has 4 Tee Slots. Supplied with Dividing Plate Set for Indexing & a Tailstock for a total Indexing solution. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. This Combination completes with TAILSTOCK, it is USED BETWEEN CENTER to Center WORK IS REQUIRED. It is ADJUSTABLE FOR DIFFERENT HEIGHTS 80 mm TO 110 mm. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “HV4 ROTARY TABLE (4 SLOT) WITH TAILSTOCK & INDEXING/DIVIDING PLATE SET” is in sale since Thursday, October 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
HV6 ROTARY TABLE 3Slot+ TAILSTOCK + INDEXING PLATES SET
HV6 ROTARY TABLE+ TAILSTOCK + INDEXING PLATES SET. Vertical centre height 105mm. One turn = 4 degrees. Table graduated 360 degrees. Vernier scale is calibrated to 10 sec. Supplied with Dividing Plate Set for Indexing & a Tailstock for a total Indexing solution. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. This Combination completes with TAILSTOCK, it is USED BETWEEN CENTRE to Center WORK IS REQUIRED. It is ADJUSTABLE FOR DIFFERENT HEIGHTS 80MM TO 110MM. The item “HV6 ROTARY TABLE 3Slot+ TAILSTOCK + INDEXING PLATES SET” is in sale since Tuesday, November 24, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK
Rotary Table Horizontal & Vertical 4 / 100 mm with. 65 mm Lathe Chuck & Back plate for Milling Machine. Vertical center Height : 2-1/16 (Approx 51 mm). Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. Calibrated in 5 Min Increment around the rim. Can be used both Vertical & Horizontal. This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is Required. These are adjustable for different hieghts & also having fine feed centre point and the centre tip is hardend and Ground. It is made up of good grade of cast iron. It is Very useful product to use. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK” is in sale since Thursday, October 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Tilting: No
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Unbranded
Rotary table 6 Horizontal & Vertical 3 Slot with Adjustable Tailstock
PRECISION ROTARY TABLE 6 3 Slot with Adjustable Tailstock. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80mm from Base to Top surface of Chuck. Graduated 360 degree around its circumference. Tailstock for Rotary Table 6. It is an adjustable height tailstock used when you need to support a long part held in the rotary table- such as cutting a spline on a shaft. Precision made of heavy cast iron, it has a base for mounting to the mill table with T- bolts. Manufactured from Seasoned Grade Casting. Adjustable to Center Heights from 85 – 110 mm. The item “Rotary table 6 Horizontal & Vertical 3 Slot with Adjustable Tailstock” is in sale since Monday, November 9, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Other CNC, Metalworking & Manufacturing”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- MPN: Does Not Apply
- Country/Region of Manufacture: India
- Custom Bundle: No
- Brand: Unbranded
Hv4 Rotary Table (4 Slot)+ Tailstock + Indexing Plates Set, M8 Clamping Kit Set
HV4 ROTARY TABLE+ TAILSTOCK + INDEXING PLATES SET. High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 110mm, Table Height 80mm, Centre Height 80mm. Centre Has a MT-2 Taper, Worm Gear Is 90-1. Vernier Scale Calibrated To 10 Seconds. Quick Release System for Manual Indexing. And Has 4 Tee Slots. Supplied with Dividing Plate Set for Indexing & a Tailstock for a total Indexing solution. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. This Combination completes with TAILSTOCK, it is USED BETWEEN CENTRE to Center WORK IS REQUIRED. It is ADJUSTABLE FOR DIFFERENT HEIGHTS 80MM TO 110MM. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “HV4 ROTARY TABLE (4 SLOT)+ TAILSTOCK + INDEXING PLATES SET, M8 CLAMPING KIT SET” is in sale since Thursday, October 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
Hv4 Rotary Table With 80mm Chcuk, Tailstock, Backplate & Indexing Plates Set
With 80 mm Self Centering Chuck, Backplate. Tailstock for HV4 and HV6 & Indexing Plate Set. Rotary Table HV4 with 80 mm Self Centering Chuck & Backplate. Our Rotary Table HV4 is having a Table Diameter : 110 mm (4-3/8). Table Height: 80 mm (3 -1/8). Worm Gear Ratio – 1:90, which means that 1 handle rotation shall turn the table by 4 Degrees. Centre Bore of the Table MT2. Table Graduated 360 Degrees. Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds. 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. It is combined with a high Quality 80 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate, fixing tee nuts with screws, 80 mm Self Centering Chuck, Tailstock for HV4 and HV6, & Indexing Plate Set. Designed to fit our 3 or 4 Rotary table with either 3 or 4 slots. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play. Fit to our HV4 and HV6, Tilting Rotary Tables 100 mm. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. Tailstock for HV4 & HV6. Its made of good Quality of Cast Iron. Height is adjustable from 80 mm to 110 mm. It is used on our HV4 & HV6 ROTARY TABLE. It is USED WHEN BETWEEN CENTRE WORK IS REQUIRED. THESE ARE ADJUSTABLE FOR DIFFERENT HEIGHTS & Having fine feed centre point and the centre tip is hardened and Ground. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “HV4 ROTARY TABLE WITH 80MM CHCUK, TAILSTOCK, BACKPLATE & INDEXING PLATES SET” is in sale since Thursday, October 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded