Precision Rotary Table HV6 Horizontal-Vertical (4 SLOT) 6/150MM
Rotary table HV-6 horizontal-vertical for milling machines. A rotary device (rotary table) is designed to secure a workpiece on milling machines when processing surfaces with the necessary rotation of the plane. The rotating device can be installed in both vertical and horizontal positions. The rotation angle of the plane is 360 degrees. The principle of operation of the rotary device is that the workpiece is rotated by manual rotation of the handle. The HV-4 rotary table is used for securing workpieces on milling machines or CNC machines. The HV-4 rotary table allows you to clamp workpieces with rotation in a horizontal plane, which provides a wide range of applications for machine tools. The HV-4 rotary table has a through hole in the center, allowing precise installation of machine tools. Also, the rotary table can be used in conjunction with the tailstock to perform machining of cylindrical surfaces. Additionally, with the rotary attachment for the milling machine, you can use special dividing disks for rotary tables for precise division into a certain number of parts. The scale printed on the dial of the HV-6 turntable is made by mechanical engraving, which ensures excellent readability of the scale and its unlimited service life. The body of the HV-6 turntable is made of HT250 cast iron. The rotary table is made of high quality hardened steel and then ground. Gear ratio – 1:90 The transmission design is a worm gear. The turntable drive is manual. Manufacturing material: cast iron, tool steel. Technical characteristics of horizontal-vertical rotary table HV-6. Working surface diameter, mm. Morse cone in the center. Central hole diameter, mm. Center height for vertical installation, mm. Adjacent angle of table T-slots. Width of installation groove, mm. Scale on the turntable. Maximum workpiece weight in horizontal position. Maximum workpiece weight in vertical position. Scale value on the rotary dial.