50mm
Tilting Rotary Table 3/80mm With 50mm Mini Lathe Chuck & Backplate
ROTARY TABLE 3 TILTING + BACK PLATE + 50 MM CHUCK. 3 / 75 mm Tilting Rotary table. Of a back plate which has holes in a manner that it can be fitted on to a 3 slot as well 4 slot Rotary table. Of a 50 mm 3 Jaw self centering Chuck and 3 set of T nut to clamp the Back Plate with the Tee slots of the Rotary Table. High Precision Mini Rotary Table tilting type 75 mm (3 Inches). Overall Height is a non tilting position is around 55 mm. Table is graduated 0- 360 degrees in 5 degree divisions. Rotating handle is graduated 0- 10 degrees in 5 minutes divisions. Table can tilt upto any position 0 to 90 degrees and locked at any position as per the requirement. It is having gunmetal gear and EN8 (form of steel) worm combination to have a minimum wear and tear to give a long life with negligible play to the product. Minimum possible friction means long life and best performance! The item “TILTING ROTARY TABLE 3/80MM WITH 50MM MINI LATHE CHUCK & BACKPLATE” is in sale since Tuesday, June 16, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “expert.tools” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: Yes
- Rotary Table Size: 3 Inch
- Chuck Size: 50 mm
- Slots: 4
- Jaws: 3
- Backplate Threaded: 12 x 1
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: RUTWIK ENGINEERS
ROTARY TABLE 3 / 80mm WITH 50mm MINI SCROLL CHUCK & SINGLE BOLT TAILSTOCK
Rotary Table Horizontal & Vertical 3 / 75mm with. 50mm Lathe Chuck for Milling Machine & Tailstock. Height – 38 mm. Ratio – 38:1. Gear mesh adjustment, the zero dial is marked in 10 min. Table scale is calibrated in 5 degree increments. Supplied with 3 rotary table, 50 mm chuck. SINGLE BOLT TAILSTOCK SUITABLE FOR ROTARY TABLE 3″ / 4″. This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. The item “ROTARY TABLE 3 / 80mm WITH 50mm MINI SCROLL CHUCK & SINGLE BOLT TAILSTOCK” is in sale since Thursday, July 2, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolsforexperts” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- MPN: Does Not Apply
- Brand: Unbranded
Horizontal Vertical Milling Indexing 4/100 Rotary Table & Small Chuck 50mm 4jaw
Description of 4 (100 mm) Rotary Table Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx) excluding chuck. Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. Description of the 50 mm 4 jaws Independent Chuck made from High Quality chuck, the body of which is made from SG Iron & Jaws are of Tool steel hardened & ground. Supplied with a mounting back plate & fixing tee nuts with screws. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table. The item “HORIZONTAL VERTICAL MILLING INDEXING 4/100 ROTARY TABLE & SMALL CHUCK 50MM 4JAW” is in sale since Thursday, May 9, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Chucks\Drill Chucks”. The seller is “toolswholesale” and is located in India. This item can be shipped worldwide.
- MPN: Does Not Apply
- Brand: Unbranded
Horizontal Vertical Milling Indexing 4/100 Rotary Table+tailstock 50mm 4jaw
4 (100 mm) Rotary Table Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx) excluding chuck. Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. Supplied with 50 mm 4 Jaws Self Centering Chuck, made from High Quality chuck, the body of which is made from SG Iron & Jaws are of Tool steel hardened & ground. Supplied with a mounting back plate & fixing tee nuts with screws. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table. The item “HORIZONTAL VERTICAL MILLING INDEXING 4/100 ROTARY TABLE+TAILSTOCK 50MM 4JAW” is in sale since Thursday, May 9, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolswholesale” and is located in India. This item can be shipped worldwide.
- MPN: Does Not Apply
- Brand: Unbranded
Horizontal Vertical Milling Indexing 4/100 Rotary Table & Small Chuck 50mm 4jaw
Description of 4 (100 mm) Rotary Table Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx) excluding chuck. Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. Description of the 50 mm 4 jaws Independent Chuck made from High Quality chuck, the body of which is made from SG Iron & Jaws are of Tool steel hardened & ground. Supplied with a mounting back plate & fixing tee nuts with screws. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table. The item “HORIZONTAL VERTICAL MILLING INDEXING 4/100 ROTARY TABLE & SMALL CHUCK 50MM 4JAW” is in sale since Monday, September 2, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “easytools” and is located in INDIA. This item can be shipped worldwide.
- Bundle Listing: No
- Country/Region of Manufacture: India
- MPN: Does Not Apply
- Brand: Unbranded/Generic
Rotary Table 4 inch 100 mm With 50mm Mini Lathe Scroll Chuck And 80 mm Backplate
Rotary Table 4 & 50 mm Chuck. Horizontal / Vertical Rotary Table. Vertical Centre Height 53 mm. Table Graduated 0-360 Degrees. 4 Slot Rotary Table. Contra rotating rapid jaw adjustment mechanism. Quality 3 jaw self centering chuck 50 mm Diameter. Supplied complete with a key as well as set of tee nuts and studs to secure it into place. Backplate is drilled and counterbored to fit a range of 3 and 4 rotary tables with 3 Slots or a 4 Slots. Backplate Threaded: 12 x 1. The item “Rotary Table 4 inch 100 mm With 50mm Mini Lathe Scroll Chuck And 80 mm Backplate” is in sale since Tuesday, September 25, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “onlineexpertools” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Tilting: No
- Height: 53 mm
- Slots: 4
- Chuck Size: 50 mm
- Jaws: 3
- Table Graduated: 0-360 Degrees
- Rotary Table Size: 100 mm
- Chuck Dia: 50 mm
- Backplate Threaded: 12 x 1
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Unbranded