back
2-3/4 Watchmaking Rotary Table, 50 MM 3 Jaws Self Centering Chuck +back Plate
Set includes 2.75 Inches Rotary Table-4 Slots with a 50 mm 3 jaws self centering chuck & back plate + T nuts. Supplied with a Quality 50 mm Small 3 jaws self centering chuck & a Back Plate with fixings. Worm- Gear Ratio is 1: 48, which means that 1 handle rotation shall turn the table 7.5 degrees. Most preferred choice of Watch makers, Jewelry Tools, Model Makers & Hobbyists. The item “2-3/4 WATCHMAKING ROTARY TABLE, 50 MM 3 JAWS SELF CENTERING CHUCK +BACK PLATE” is in sale since Monday, November 30, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “globaltools2016″ and is located in Delhi, Delhi. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
New Rotary Table 3/75mm, 4jaw Chuck Self Centring with Back Plate Set, Clamping
Integrates of Rotary Kit. Rotary Table 3/75 mm. 2 4 Jaw Chuck Self Centering with Back Plate 70mm. Weight of Kit :- 3.8 Kgs / 8.36 Lbs. Chuck Size:- 70mm. Precision ground horizontally and vertically. Graded cast iron and precision ground. The work table is graduated to full 360 degrees. Gear Ratio 36:1. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws. There is a fixture plate on which the chuck is mounted. The colour of item can be vary depend upon availability. The item “New Rotary Table 3/75mm, 4jaw Chuck Self Centring with Back Plate Set, Clamping” is in sale since Monday, March 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Chuck size: 4 Jaw Chuck Self Centering 70 mm plate
- Country/Region of Manufacture: India
- Weight of Kit: 3.8 Kgs / 8.36 Lbs
- Operation: Manual
- Brand: Unbranded
New Rotary Table 4/100mm Tilting 80mm 3Jaw Chuck Back Plate, Tail Stock &Clamps
Integrates of Rotary Kit. Rotary Table with Tilting 4/100 mm. 2 3Jaw Chuck with Back Plate 80mm. Weight :- 10 Kgs / 22 Lbs. Table Dia:- 4/100 MM. Tee Slot:- M 6. Gear Ratio :- 36:1. Rotary Table Tilting Type 4/100 mm has a gear ratio of 36:1 suitable for working horizontally and vertically. Can be set on an angle for holding precision jobs. Angular marking is very precise making working easy. Rotary Table Uses. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. Height can be varied while working with different index centers while the angle of inclination can be changed for various machining applications. The tip of center is finely rotatable. The dead center of the tail stock should be in line with the center of the rotary table. Tail stock suitable f or 3″ & 4″ Rotary Table. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a rotary. On a milling machine. Usually used to apply support to the longitudinal rotary. Axis of a work-piece being machined. Center is mounted in the tail stock, and inserted against the sides of a hole in the center of the work-piece. A tail stock has a Dead center, while. A Tail stock is particularly useful when the work-piece is relatively long and slender. 3.3/8 / 85mm. 1.1/2 / 38mm. The 3 jaw chuck has a big range clamping. The chuck has 3 reversible jaws. There is a fixture plate on which the chuck is mounted. These chucks ideal for gripping non-circular cross sections and gripping circular cross sections with extreme precision. The color of item can be vary depend upon availability. The item “New Rotary Table 4/100mm Tilting 80mm 3Jaw Chuck Back Plate, Tail Stock &Clamps” is in sale since Wednesday, March 20, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Tilting: Yes
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Tee Slot: M 6
- Modified Item: No
- Country/Region of Manufacture: India
- Weight of Kit: 10 Kgs / 22 Lbs
- Centre Height Min:: 3.3/8″ / 85mm
- Operation: Manual
- Rotary Table: 4”/100mm
- Gear Ratio: 36:1
- Chuck Size: 80mm
- Brand: Unbranded
- Cross-Slide: Yes
- Centre Height Max:: 1.1/2″ / 38mm
New Rotary Table 4.5/16/100 mm, 4 Jaw Independent Chuck with Back & Divide Plate
Integrates of Rotary Kit. Rotary Table 4.5/16/110 mm. 2 4 Jaw Chuck independent chuck with Back Plate 80mm. Weight of Kit :- 17 Kgs / 37.4 Lbs. Gear Ratio:- 90:1. Made of ductile cast iron and precision ground The worktable is graduated to a full 360° MT 2 centre for holding work pieces worm gear ration is 90:1 making one turn of the handle move the table 4° vernier scale makes setting down to 10 secs possible quick release system for manual indexing. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws and. Jaw can be moved independently. There is a fixture plate on which the chuck is mounted. These chucks ideal for gripping non-circular cross sections and gripping circular cross sections with extreme precision. Height can be varied while working with different index centres while the angle of inclination can be changed for various machining applications. The tip of centre is finely rotatable. The dead centre of the tail stock should be in line with the centre of the rotary table. Tail stock suitable for 6″ & 4.5/16″ Rotary Table. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a. On a milling machine. Usually used to apply support to the longitudinal. Axis of a work-piece being machined. Is mounted in the tail stock, and inserted against the sides of a hole in the centre of the work-piece. A tail stock has a Dead centre , while. A Tail stock is particularly useful when the work-piece is relatively long and slender. 6.1/4 / 108mm. 3.3/16 / 80mm. He divisions of preset holes are provided for the most common angles such as 30, 45 and 90. The remaining divisions of the circle are provided for manually rotating the dividing arm using the plates. The colour of item can be vary depend upon availability. The item “New Rotary Table 4.5/16/100 mm, 4 Jaw Independent Chuck with Back & Divide Plate” is in sale since Monday, March 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Country/Region of Manufacture: India
- Weight of Kit: 17 Kgs / 37.4 Lbs
- Operation: Manual
- Rotary Table: 4.5/16” /110mm
- Gear Ratio: 90:1
- Chuck Size: 80mm
- Brand: Unbranded
New Rotary Table 6/150mm, 4jaw Indep. Chuck with Back & Dividing Plate Tailstock
Integrates of Rotary Kit. Rotary Table 6/150 mm. 2 4 Jaw Chuck Independent chuck with Back Plate 100mm. Weight of Kit :- 21 Kgs / 46.2 Lbs. Gear Ratio:- 90:1. Made of ductile cast iron and precision ground The worktable is graduated to a full 360° MT 2 centre for holding work pieces worm gear ration is 90:1 making one turn of the handle move the table 4° vernier scale makes setting down to 10 secs possible quick release system for manual indexing. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws and. Jaw can be moved independently. There is a fixture plate on which the chuck is mounted. These chucks ideal for gripping non-circular cross sections and gripping circular cross sections with extreme precision. Height can be varied while working with different index centres while the angle of inclination can be changed for various machining applications. The tip of centre is finely rotatable. The dead centre of the tail stock should be in line with the centre of the rotary table. Tail stock suitable for 6″ & 4.5/16″ Rotary Table. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a. On a milling machine. Usually used to apply support to the longitudinal. Axis of a work-piece being machined. Centre is mounted in the tail stock, and inserted against the sides of a hole in the centre of the work piece. A tail stock has a Dead. A Tail stock is particularly useful when the work-piece is relatively long and slender. 6.1/4 / 108mm. 3.3/16 / 80mm. The divisions of preset holes are provided for the most common angles such as 30, 45 and 90. The remaining divisions of the circle are provided for manually rotating the dividing arm using the plates. Term & Conditions. The colour of item can be vary depend upon availability. The item “New Rotary Table 6/150mm, 4jaw Indep. Chuck with Back & Dividing Plate Tailstock” is in sale since Monday, March 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Country/Region of Manufacture: India
- Operation: Manual
- Rotary Table: 6”/150mm
- Weight Of Kit: 21 Kgs / 46.2 Lbs
- Gear Ratio: 90:1
- Chuck Size: 100mm
- Brand: Unbranded
New Rotary Table 4/100 mm kit 4Jaw Chuck with Back Plate Tail Stock &Clamps Set
Integrates of Rotary Kit. Rotary Table 4/100 mm. 2 4 Jaw Chuck with Back Plate 80 mm. Weight of Kit :- 9 Kgs / 19.8 Lbs. Chuck Size :- 80 mm. 3.3/8 / 85 mm. 1.1/2 / 38 mm. Precision ground horizontally and vertically. Graded cast iron and precision ground. The work table is graduated to full 360 degrees. Gear Ratio 36:1. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws. There is a fixture plate on which the chuck is mounted. Height can be varied while working with different index centers while the angle of inclination can be changed for various machining applications. The tip of center is finely rotatable. The dead center of the tail stock should be in line with the center of the rotary table. Tail stock suitable for 4″ /100 mm” Rotary Table. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a rotary table. On a milling machine. Usually used to apply support to the longitudinal Ro. Axis of a work piece being machined. Is mounted in the tail stock, and inserted against the sides of a hole in the center of the work piece. A tail stock has a Dead Center, while. A Tail stock is particularly useful when the work piece is relatively long and slender. Term & Conditions. The colour of item can be vary depend upon availability. The item “New Rotary Table 4/100 mm kit 4Jaw Chuck with Back Plate Tail Stock &Clamps Set” is in sale since Friday, March 29, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Country/Region of Manufacture: India
- Weight of Kit: 9 Kgs / 19.8 Lbs
- Operation: Manual
- Chuck Size: 80 MM
- Brand: Unbranded
New Tilting Rotary Table 4/100 mm kit 3 jaw Chuck with Back Plate Clamping set
Integrates of Rotary Kit. Rotary Table 4/100 mm. 2 3 Jaw Chuck with Back Plate 80 mm. Weight of Kit :- 8 Kgs / 17.6 Lbs. Chuck Size :- 80 mm. Precision ground horizontally and vertically. Graded cast iron and precision ground. The work table is graduated to full 360°. Gear Ratio 36:1. Tilting type Rotary table can be used angular setting. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 3 jaw chuck has a big range clamping. The chuck has 3 reversible jaws. There is a fixture plate on which the chuck is mounted. The colour of item can be vary depend upon availability. The item “New Tilting Rotary Table 4/100 mm kit 3 jaw Chuck with Back Plate Clamping set” is in sale since Friday, March 29, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
- Tilting: Yes
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Country/Region of Manufacture: India
- Weight of Kit: 8 Kgs/ 17.6 Lbs
- Operation: Manual
- Brand: Unbranded
- Cross-Slide: Yes
New Tilting Rotary Table 4/100 mm kit 4jaw Chuck with Back Plate & Clamping Set
Integrates of Rotary Kit. Rotary Table Tilting Type 4/100 mm. 2 4 Jaw Chuck with Back Plate 80 mm. Weight of Kit :- 8.2 Kgs / 18.04 Lbs. Chuck Size :- 80 mm. Gear Ratio:- 36:1. Precision ground horizontally and vertically. Graded cast iron and precision ground. The work table is graduated to full 360°. Gear Ratio 36:1. Tilting type Rotary Table can be use angular setting. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws. There is a fixture plate on which the chuck is mounted. The colour of item can be vary depend upon availability. The item “New Tilting Rotary Table 4/100 mm kit 4jaw Chuck with Back Plate & Clamping Set” is in sale since Friday, March 29, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
- Tilting: Yes
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Weight of kit: 8.2 Kgs / 18.04 Lbs
- Modified Item: No
- Gear Ratio:: 36:1
- Country/Region of Manufacture: India
- Operation: Manual
- Rotary Table: 4”/100mm
- Chuck Size: 80 MM
- Brand: Unbranded
Rotary Table Horizontal & Vertical 3/75mm with65mm Lathe Chuck with Back Plate
Rotary Table Horizontal & Vertical 3/75mm. Along With a 65mm Lathe Chuck. 3 Inch Rotary Table Horizontal And Vertical. Table graduated 360 degrees, Nice smooth rotation. Vertical center height 44 mm, in 4 Slots. Regular 80 mm horizontal/ vertical Rotary Table complete. One turn = 10 degrees. Supplied with 65 mm Self Centering Chuck & 80 mm Back-plate. Contra rotating rapid jaw adjustment mechanism. Quality 3 jaw self centering chuck 65 mm Diameter. Supplied complete with a key as well as set of tee nuts and Allen Screws to secure it into place. Back-plate is drilled and counter-bored to fit a range of 3 and 4 Inch rotary tables with 3 Slots or a 4 Slots. Back-plate Threaded: 14 x 1. 65 MM Chuck Threaded 14 x1. The item “Rotary Table Horizontal & Vertical 3/75mm with65mm Lathe Chuck with Back Plate” is in sale since Monday, July 20, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “bluefox_tools” and is located in New delhi. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Brand: BLUEFOX
Rotary Table 4 Tilting 4slot + 65 Mm Self Centering Chuck +Back plate & 2 Tnuts
Rotary Table 4 Tilting. Hor/vert Rotary Table 4. Table height 66 mm in flat position. Table graduated 360 degrees in 5 degree divisions. Base is 145 mm x 126 mm with two 10 mm mounting holes separated by 110 mm. The table tilts upto 90 degrees and can be used. 65 mm Self Centering Chuck with 65mm Backplate. Our Chuck is Hardened and ground working surfaces prolong life while ensuring continuous accuracy and repeatability. Both sides of the jaw teeth and guides are ground and hardened to HRC 58-62. Each set of jaws are serialised in their own set. Supplied with 80mm Backplate suitable for 65 mm self centering chuck. The item “Rotary Table 4 Tilting 4slot + 65 Mm Self Centering Chuck +Back plate & 2 Tnuts” is in sale since Tuesday, July 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial-tools” and is located in Jhilmil Industrial Area Delhi. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: Yes
- MPN: Does Not Apply
- Brand: Unbranded