chuck
Rotary Table 100 mm 4 Inch With 65 mm Mini Lathe Scroll Chuck




Rotary Table 4 & 65 mm Chuck. Horizontal / Vertical Rotary Table. Vertical Centre Height 53 mm. Table Graduated 0-360 Degrees. 4 Slot Rotary Table. Contra rotating rapid jaw adjustment mechanism. Quality 3 jaw self centering chuck 65 mm Diameter. Supplied complete with a key as well as set of tee nuts and studs to secure it into place. Backplate is drilled and counterbored to fit a range of 3 and 4 rotary tables with 3 Slots or a 4 Slots. Backplate Threaded: 14 x 1. Satz Drehtisch 4 & 65 mm Chuck. Höhe / Dicke 53 mm. Vertikale Spitzenhöhe 53 mm. Tabelle absolvierte 0-360 Grad. Qualität 3 Backen selbstzentrierendes Spannfutter 65 mm Durchmesser. Geliefert mit einem Schlüssel sowie einem Satz T-Muttern und Stehbolzen zur Sicherung. Die Backplate ist gebohrt und gegengebohrt, um eine Reihe von 3-Zoll- und 4-Zoll-Drehtischen mit 3 oder 4 Schlitzen aufzunehmen. Rückenplatte mit Gewinde: 14 x 1. The item “Rotary Table 100 mm 4 Inch With 65 mm Mini Lathe Scroll Chuck” is in sale since Tuesday, September 3, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolsforworldwide” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Height/Thickness: 53 mm
- Vertical Centre Height: 53 mm
- Chuck Size: 65 mm
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- Height: 53 mm
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Rutwik

Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK


Rotary Table Horizontal & Vertical 4 / 100 mm with. 65 mm Lathe Chuck & Backplate for Milling Machine. Vertical center Height : 2-1/16 (Approx 51 mm). Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. Calibrated in 5 Min Increment around the rim. Can be used both Vertical & Horizontal. This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is Required. These are adjustable for different hieghts & also having fine feed centre point and the centre tip is hardend and Ground. It is made up of good grade of cast iron. It is Very useful product to use. The item “Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK” is in sale since Friday, May 11, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “zealfortools” and is located in india. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- MPN: Does Not Apply
- Brand: Unbranded/Generic
- Bundle Listing: Yes

Vertex 8 Indexing Super Spacer 3 Jaw Chuck Vertical Horizontal Rotary Table













VERTEX 8 INDEXING SUPER SPACER 3 JAW CHUCK VERTICAL HORIZONTAL ROTARY TABLE. The item “VERTEX 8 INDEXING SUPER SPACER 3 JAW CHUCK VERTICAL HORIZONTAL ROTARY TABLE” is in sale since Saturday, December 21, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tmleader” and is located in Ooltewah, Tennessee. This item can be shipped to United States.
- Brand: Vertex
- Setting Position: Horizontal
- MPN: Does Not Apply

Rotary Table 4 4-Slot with Tailstock + Dividing Plates + a 4 3 Jaw Lathe Chuck













VERTICAL & HORIZONTAL- Our rotary table for milling machine is 4/100mm with 4 slots can be used in both horizontal and vertical positions, meeting two functions and also bringing you convenient as well as efficient milling experience. REMARKABLE QUALITY- Cast iron mainly used to cast parts subjected to pressure and vibration on mechanical equipment, offering rotary table for milling durability, shock absorption and heat-resistantance. The dial is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it possible to use it easily and conveniently. The precision rotary table indexing plate can be graduated 360 Degrees. With a set of wrench and set of screws, indexing plate set, a quality tailstock and self-centering chuck, it will be more convenient for you to operate this rotary table. MULTIPLE APPLICATION- The power milling machines are widely used in milling machine like index boring, milling, circle cutting, spot facing and boring hole and so on. Practical design can meet a variety of workshop work needs. Vertical & Horizontal Design. Both vertical and horizontal with two functions. Circle cutting, indexing drilling, milling and more complicated work are possible when the vertical position of the table is used together with the tail part. Milling table is of good casting performance like mill vise, shock absorption performance as well as high strength heat resistance. Just adjust the handle to the position where you want as the precise scale is marked on the dial. The dial is divided into 360 degrees in total. Clear scale is more convenient for you to operate it. Quality Tailstock and Chuck. With adjustable height which ranges from. 3.8-5.2inch (42-90mm). And self-centering chuck (100mm), the quality tailstock will fit different size of rotary tables. Three dividing plate set(Plate’A’ – 15, 16, 17, 18, 19, 20 Plate’B’ – 21, 23, 27, 29, 31, 33 Plate’C’ – 37, 39, 41, 43, 47, 49). A set of wrench and screws are free for you with your installation. Rotary table milling machines are designed for milling, drilling, fixture boring and many common workshop applications. 4/100mm Rotary Table 4-Slot Rotary Table. The mill rotary table is one of the main accessories of milling machine. As a precision work positioning device, it is widely used for indexing drilling, milling, circumferential cutting, boring, etc. The rotary turn table for milling machine is made from casting with high quality, can work with a set of dividing plate and a tailstock. Table Dimension: 4inch (100mm). Tailstock Height Range: 3.8-5.2inch (42-90mm). Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. 37, 39, 41, 43, 47, 49. 1 x Rotary Table. 3 x Dividing Plates. 1 x A Set of Accessory. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “Rotary Table 4 4-Slot with Tailstock + Dividing Plates + a 4 3 Jaw Lathe Chuck” is in sale since Thursday, December 12, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “love-happyshopping” and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.
- Brand: Vevor 1574663130894951
- MPN: 7874A00101574663130
- Operation: Manual
- Setting Position: Horizontal/Vertical
- Centre Bore: MT-2
- Thread: M12*4
- Table Dimension: 4inch (100mm)
- Tailstock Height Range: 3.8-5.2inch (42-90mm)
- Plate ‘A': 15, 16, 17, 18, 19, 20
- Plate ‘B': 21, 23, 27, 29, 31, 33
- Plate ‘C': 37, 39, 41, 43, 47, 49
- Package Content 1: 1 x Rotary Table
- Package Content 2: 3 x Dividing Plates
- Package Content 3: 1 x Tailstock
- Package Content 4: 1 x Chuck
- Package Content 5: 1 x A Set of Accessory

6/150mm Horizontal and Vertical ROTARY TABLE with 3 JAW Self centering chuck












6/150mm Horizontal and Vertical ROTARY TABLE with 3 JAW Self centering chuck. Which ensures durability and long service life. The vertical&horizontal rotary table is one of the main accessory of milling machine. It can be used for indexing drilling or milling, circumferential cutting, boring a hole and spot facing on milling machine. When rotary table in vertical with tailstock working together, it can used on complex work for circular indexing drilling and milling. Enjoys strong stability and wonderful performance. Condition: 100% Brand new. Size: As Shows in Pictures. Colors: As Shows in Pictures. Center height: 100mm / 3.94in. Center hole diameter: 18mm / 0.71in. Table surface diameter: 150mm / 5.91in. Spindle connection size: 18mm / 0.71in. T-groove width: 14mm / 0.55in. Location key width: 16mm / 0.63in. Indexing accuracy: 60 (s). Repetition accuracy: 60 (s). Applicable Machine Tool: Milling Machine. 1 HV Dividing Plate. 1 Three Jaw Chuck. 1 High precision flange. Please allow slight error due to manual measurement and make sure you do not mind before ordering. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item “6/150mm Horizontal and Vertical ROTARY TABLE with 3 JAW Self centering chuck” is in sale since Monday, September 2, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “accessories_mall” and is located in Hongkong. This item can be shipped worldwide.
- Brand: Unbranded
- Center height: 100mm / 3.94in
- Center hole diameter: 18mm / 0.71in
- Country/Region of Manufacture: China
- Location key width: 16mm / 0.63in
- Material: Nodular Cast Iron
- Model: HV6
- MPN: Does Not Apply
- Spindle connection size: 18mm / 0.71in
- T-groove width: 14mm / 0.55in
- Table surface diameter: 150mm / 5.91in

4/100 MM Rotary Table+horizontal Vertical+tailstock+round Vice+70mm 4jaw Chuck







Description of 4 (100 mm) Rotary Table Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. ETAILS OF ROUND VICE. Made of high grade close grain caste Iron. The moving jaw has V-grooves to hold Round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Supplied with a Suitable Tailstock , Clamp kit & a Chuck with Back Plate & Fixing T nuts BODY OF THE CHUCK IS GRADED CASTE IRON. JAWS ARE HARDENED STEEL. The item “4/100 MM ROTARY TABLE+HORIZONTAL VERTICAL+TAILSTOCK+ROUND VICE+70MM 4JAW CHUCK” is in sale since Monday, September 2, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “easytools” and is located in INDIA. This item can be shipped worldwide.
- Bundle Listing: No
- Country/Region of Manufacture: India
- MPN: Does Not Apply
- Brand: Unbranded/Generic

Rotary Table 80 mm 3 in With 4 Jaws Independent Chuck 65 mm Small With Backplate





Rotary Table 3 with 65 mm Independent Chuck. Precision Rotary Table 3/ 75 mm is manufactured from Seasoned casting. Precisely maintained Chuck Run Out and Bottom Surface for accurate work. 4 T Slots for fixing work can be used with Clamping kit. Table graduated 0-360 degrees in 5 degree divisions. Winding handle is graduated 0-10 degrees in 5 minute divisions. Chuck Diameter: 65 mm. Quality 4 Jaw Independent chuck, body of chuck is made up of SG Iron & Jaws are of Tool steel hardened & ground. Jaws are reversible as well. Supplied with mounting, back plate and fixing tee nuts with screws. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The chuck mounting is Thread M14 x 1. The item “Rotary Table 80 mm 3 in With 4 Jaws Independent Chuck 65 mm Small With Backplate” is in sale since Saturday, July 13, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “onlineexpertools” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Tilting: No
- No. of Slots: 4
- Chuck Diameter: 65 mm
- Thread Size: M14 x 1
- Rotary Table Size: 3 in
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Unbranded

4 Inch Rotary Table 4 Slots with 65mm Lathe Chuck & M6 Clamping Kit


4 Inch Rotary Table 4 Slots with 65mm Lathe Chuck & M6 Clamping Kit. Vertical center Height : 2-1/16 (Approx 51 mm). Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. Calibrated in 5 Min Increment around the rim. Can be used both Vertical & Horizontal. The Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “4 Inch Rotary Table 4 Slots with 65mm Lathe Chuck & M6 Clamping Kit” is in sale since Friday, August 30, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “loyaltoolsinc” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded

Rotary Table 3/ 80 mm 4 Slots With 50 mm Mini Lathe Scroll Chuck and Backplate




Rotary Table 3 & 50 mm Chuck. 3 Rotary Table Horizontal & Vertical. Table graduated 360 degrees, Nice smooth rotation. Vertical centre height 44 mm, in 4 Slots. Regular 80 mm horizontal/ vertical Rotary Table complete. One turn = 10 degrees. Supplied with 50 mm Self Centering Chuck & 80 mm Backplate. Contra rotating rapid jaw adjustment mechanism. Quality 3 jaw self centering chuck 50 mm Diameter. Supplied complete with a key as well as set of tee nuts and studs to secure it into place. Backplate is drilled and counterbored to fit a range of 3 and 4 rotary tables with 3 Slots or a 4 Slots. Backplate Threaded: 12 x 1. The item “Rotary Table 3/ 80 mm 4 Slots With 50 mm Mini Lathe Scroll Chuck and Backplate” is in sale since Thursday, May 2, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “onlineexpertools” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Tilting: Yes
- Jaws: 3
- Slot: 4
- Vertical centre height: 44 mm
- Backplate Size: 80 mm
- Backplate Threaded: 12 x 1
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Rutwik

Rotary Table 3/ 80 mm 4 Slot With 65 mm Mini Lathe Chuck For Milling Machine





Rotary Table 3 & 65 mm Chuck. 3 Rotary Table Horizontal & Vertical. Table graduated 360 degrees, Nice smooth rotation. Vertical centre height 44 mm, in 4 Slots. Regular 80 mm horizontal/ vertical Rotary Table complete. One turn = 10 degrees. Supplied with 65 mm Self Centering Chuck & 80 mm Backplate. Contra rotating rapid jaw adjustment mechanism. Quality 3 jaw self centering chuck 65 mm Diameter. Supplied complete with a key as well as set of tee nuts and studs to secure it into place. Backplate is drilled and counterbored to fit a range of 3 and 4 rotary tables with 3 Slots or a 4 Slots. Backplate Threaded: 14 x 1. The item “Rotary Table 3/ 80 mm 4 Slot With 65 mm Mini Lathe Chuck For Milling Machine” is in sale since Saturday, November 2, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolsforworldwide” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Unbranded
- Rotary Table Size: 3″
- Chuck Size: 65 mm
- Slots: 4
- Jaws: 3
- Backplate Threaded: 14 x 1
