inch
Horizontal Vertical Rotary Table 8 inch Diameter Milling Drilling Vise Machine





Horizontal Vertical Rotary Table 8 inch Diameter Milling Drilling Vise Machine. In L x 18 in W x 10-5/8 in H Rough Estimation. 56 Pounds Rough Estimation. Table Diameter: 8 inch. Height OA Horizontal: 3.94 inch. Center Height for vertical mounting: 5.91 inch. Center Hole: 3 Morse Taper. Locating slot width: 0.630. Maximum working load: 330 lbs (horizontally). Maximum working load: 165 lbs (vertically). Designed for milling, drilling, jigboring, and many common shop applications. 10 second vernier reading. Gear drive immersed in oil. Extra deep coolant channel. Dual positive action locks. Maximum individual spacing error 4″table 120″, 6″ table 80″, 8, 10, 12, 16″ tables 60″. 4 table utilizes low profile locks for added work space. Gear ratio: 4″ table is 72:1; 6-16″tables are 90:1. Flatness of clamping service-concave. Concentricity of center bore. Parallelism of clamping surface to angle face. Squareness of angle surface to clamping surface. Squareness of clamping surface tocenter slot. The item “Horizontal Vertical Rotary Table 8 inch Diameter Milling Drilling Vise Machine” is in sale since Monday, October 7, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “mhglobal” and is located in Monrovia, California. This item can be shipped to United States.
- MPN: Does Not Apply
- Brand: Unbranded
- California Prop 65 Warning: WARNING: This products contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. ADVERTENCIA: Este producto coniene productos quimcos reconocidos por el estado de California que provocan cáncer, defectos de nacimiento u otros danos reproductivos

4 Inch Heavy Duty Horizontal Vertical Precision Rotary Table H/V 100mm








4 Inch Heavy Duty Horizontal Vertical Precision Rotary Table H/V 100mm For Milling Machine. 5-1/4 in L x 1-5/8 in W x 6-1/2 in H Rough Estimation. 9 Pounds Rough Estimation. Horizontal / Vertical Using. 4 Inch Diameter Table (Rotates 360 Degrees). 1:36 Ratio Or 10 Degrees Per Hand Wheel Revolution. Scale Reads To 15 Minutes. Low Profile – Only 2-1/8 Inch Tall. Rotary Table Suitable For Bolt Patterns, Arched Slots, Cutting Out Flywheels And Other Medium Precision Jobs. The Small Size Of The Table Is Good For Small Milling Machines. The Table Has A Low Profile Of 2.167 Inch In The Horizontal Position. Table Comes With 02 Clamping Studs, 02 45mm Clamping Bars And 02 T-nuts. The item “4 Inch Heavy Duty Horizontal Vertical Precision Rotary Table H/V 100mm” is in sale since Monday, April 1, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “mhglobal” and is located in Monrovia, California. This item can be shipped to United States.
- MPN: Does Not Apply
- Brand: Unbranded
- California Prop 65 Warning: WARNING: This products contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. ADVERTENCIA: Este producto coniene productos quimcos reconocidos por el estado de California que provocan cáncer, defectos de nacimiento u otros danos reproductivos

Accura/vertex Artb-010 Hv-10 10 Inch Horizontal/vertical Rotary Table




ACCURA/VERTEX ARTB-010 HV-10 10 INCH HORIZONTAL/VERTICAL ROTARY TABLE. This listing features the high quality VERTEX HV-10 horizontal/vertical rotary table. Good for the larger shop, this unit features high density Meehanite construction and it is inspected by the HEIDENHAIN process to ensure flatness and parallelism. 6 3/4 t-slots allow for easy mounting of the work and the unit has an MT3 center hole. Overall height is 4.53 inches and we sell the dividing plates and tail stock for this unit as well. Ships At 85 Lbs. Our feedback record proves that We are trusted. We treat folks right. Just plan on staying a while. We will work it out. If it has been altered or marred or pulled apart return privilege is voided. Check your own specs first. Saves us all a lot of hassle and everyone is happy. And that’s how we like it. RECYCLED BOXES & PACKING. And charge only what UPS charges us. Please check out our other auctions and visit our. THANKS FROM ALL OF US AT THE WORLD’S FIRST TOOL SUPERMARKET. The item “ACCURA/VERTEX ARTB-010 HV-10 10 INCH HORIZONTAL/VERTICAL ROTARY TABLE” is in sale since Thursday, August 15, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “thetoolsupermarket” and is located in Beaver Falls, Pennsylvania. This item can be shipped to United States.
- MPN: Does Not Apply
- Brand: ACCURA-VERTEX
- Model: ARTB-010
- Country//Region of Manufacture: Taiwan

Milling Machine Heavy Duty 4 Inch Tilting Rotary Table Horizontal And Vertical








Milling Machine Heavy Duty 4 Inch Tilting Rotary Table Horizontal And Vertical. 6 in L x 6 in W x 5/8 in H Rough Estimation. 12 Pounds Rough Estimation. Table Measures 2-5/8 Inch High Horizontal Position. Table Rotation: 360 Degrees. Four 5/16 Inch T-slots. 1:36 Hand Wheel Ratio. 5 Minute Scale Resolution And Ball Bearing Rotary Support. The item “Milling Machine Heavy Duty 4 Inch Tilting Rotary Table Horizontal And Vertical” is in sale since Monday, April 1, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “mhglobal” and is located in Monrovia, California. This item can be shipped to United States.
- MPN: Does Not Apply
- Brand: Unbranded
- California Prop 65 Warning: WARNING: This products contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. ADVERTENCIA: Este producto coniene productos quimcos reconocidos por el estado de California que provocan cáncer, defectos de nacimiento u otros danos reproductivos

Vertex HV6 6 inch 150mm Vertical/Horizontal Rotary Table


Vertex 6 inch Vertical / Horizontal Rotary Table. Please note photo is of a larger size and ythis table has 3 tee slots. Hardened and Ground Worm. The ratio is 90:1. The work table is graduated a full 360 degrees so that one turn of the handle moves the table through 4 degrees. Mirco collar is graduated in steps of 1 minute, and the vernier scale makes settings down to 10 seconds possible. These Rotary Tables are popular for their excellent performance, practical design and reasonable cost, they are widely used for circular cutting work, angle setting, boring, spot facing and similar work. 3 Off Tee Slots 11mm Wide. The item “Vertex HV6 6 inch 150mm Vertical/Horizontal Rotary Table” is in sale since Sunday, August 4, 2019. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “fordeight” and is located in West Midlands. This item can be shipped worldwide.
- MPN: HV06
- Brand: Vertex

HV6 6 Inch Horizontal & Vertical Rotary Working Table Mill & Drill Machine HighQ













HV6 6 Inch Horizontal & Vertical Rotary Working Table Mill & Drill Machine HighQ. Which ensures durability and long service life. The vertical&horizontal rotary table is one of the main accessory of milling machine. It can be used for indexing drilling or milling, circumferential cutting, boring a hole and spot facing on milling machine. When rotary table in vertical with tailstock working together, it can used on complex work for circular indexing drilling and milling. Enjoys strong stability and wonderful performance. Condition: 100% Brand new. Material: Nodular Cast Iron. Size: As Shows in Pictures. Colors: As Shows in Pictures. Center height: 100mm / 3.94in. Center hole diameter: 18mm / 0.71in. Table surface diameter: 150mm / 5.91in. Spindle connection size: 18mm / 0.71in. T-groove width: 14mm / 0.55in. Location key width: 16mm / 0.63in. Indexing accuracy: 60 (s). Repetition accuracy: 60 (s). Applicable Machine Tool: Milling Machine. Please allow slight error due to manual measurement and make sure you do not mind before ordering. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item “HV6 6 Inch Horizontal & Vertical Rotary Working Table Mill & Drill Machine HighQ” is in sale since Thursday, February 28, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “goodseverybuy” and is located in Hongkong. This item can be shipped worldwide.
- Brand: Unbranded
- Material: Nodular Cast Iron
- Model: HV6
- MPN: Does Not Apply

6 INCH HORIZONTAL VERTICAL PRECISION QUALITY ROTARY TABLE Milling Drilling




6 Horizontal & Vertical Rotary Table. Dual positive action locks. Center height vertical position. Overall height in vertical position. Overall width (not including handle) in vertical position. Mounting table bolt width. The item “6 INCH HORIZONTAL VERTICAL PRECISION QUALITY ROTARY TABLE Milling Drilling” is in sale since Saturday, April 13, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “dbmimports” and is located in Rosemead, California. This item can be shipped to United States.
- MPN: Does Not Apply
- Brand: Unbranded
- California Prop 65 Warning: WARNING: This products contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. ADVERTENCIA: Este producto coniene productos quimcos reconocidos por el estado de California que provocan cáncer, defectos de nacimiento u otros danos reproductivos

Vertex HV4 4 inch 110mm Vertical/Horizontal Rotary Table


Vertex 4 inch Vertical / Horizontal Rotary Table. Please note photo is of a larger size and ythis table has 3 tee slots. Hardened and Ground Worm. The ratio is 90:1. The work table is graduated a full 360 degrees so that one turn of the handle moves the table through 4 degrees. Mirco collar is graduated in steps of 1 minute, and the vernier scale makes settings down to 10 seconds possible. These Rotary Tables are popular for their excellent performance, practical design and reasonable cost, they are widely used for circular cutting work, angle setting, boring, spot facing and similar work. 3 Off Tee Slots 11mm Wide. The item “Vertex HV4 4 inch 110mm Vertical/Horizontal Rotary Table” is in sale since Sunday, January 21, 2018. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “fordeight” and is located in West Midlands. This item can be shipped worldwide.
- Brand: Vertex
- MPN: HV04

HV6 6 Inch Horizontal & Vertical Rotary Working Table Mill & Drill Machine New








HV6 6 Inch Horizontal & Vertical Rotary Working Table Mill & Drill Machine New. Which ensures durability and long service life. The vertical&horizontal rotary table is one of the main accessory of milling machine. It can be used for indexing drilling or milling, circumferential cutting, boring a hole and spot facing on milling machine. When rotary table in vertical with tailstock working together, it can used on complex work for circular indexing drilling and milling. Enjoys strong stability and wonderful performance. Condition: 100% Brand new. Material: Nodular Cast Iron. Size: As Shows in Pictures. Colors: As Shows in Pictures. Center height: 100mm / 3.94in. Center hole diameter: 18mm / 0.71in. Table surface diameter: 150mm / 5.91in. Spindle connection size: 18mm / 0.71in. T-groove width: 14mm / 0.55in. Location key width: 16mm / 0.63in. Indexing accuracy: 60 (s). Repetition accuracy: 60 (s). Applicable Machine Tool: Milling Machine. Please allow slight error due to manual measurement and make sure you do not mind before ordering. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item “HV6 6 Inch Horizontal & Vertical Rotary Working Table Mill & Drill Machine New” is in sale since Wednesday, February 27, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “gooddealfrance” and is located in Hongkong. This item can be shipped worldwide.
- Brand: Unbranded
- Center height: 100mm
- Indexing accuracy: 60(s)
- Location key width: 16mm
- Material: Nodular Cast Iron
- Model: HV6
- MPN: Does Not Apply
- Repetition accuracy: 60(s)
- T-groove width: 14mm

4 Horizontal & Vertical Rotary Table Prime Quality 4 Inch Hv Rotary Table




Designed to allow machining at a higher dimension than typical horizontal rotary table. The table base could be used in vertical position to carry out center work. Center Hole MT2 (Morse taper 2). Of Center Hole: 0.7874″ x 0.3150″. Height of center for Vert. Width of T-Slot: 0.2362. Adjacent angle of T-Slot: 90 degree. Width of locating key: 0.3937. Vernier scale reading: 10 seconds. One turn of the handle moves the table by 4 degree. All of our products are in brand new condition. If you have any questions regarding our products or services, please give us a chance for correction. Please do not leave a negative or neutral feedback. We will do our best to fix it. The item “4 HORIZONTAL & VERTICAL ROTARY TABLE PRIME QUALITY 4 INCH HV ROTARY TABLE” is in sale since Tuesday, October 13, 2015. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “zlivecenter” and is located in Diamond Bar, California. This item can be shipped worldwide.
- Model: ZLC TSL4-100
- MPN: 4INRT
- Brand: Z LIVE CENTER
- Manufacturer: Z LIVE CENTER
