80_mm_4_Jaw_Independent_Chuck_with_Back_Plate_Rotary_Table_USA_Fulfilled_01_kjw

80 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)

80 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
80 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
80 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
80 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)

80 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
(With 4/ 100 mm Rotary Table). Made of Caste Iron, Precision High Quality 4 /100 mm Regular Rotary Table designed for smaller milling machines. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Can be clamped vertically and horizontally both ways. Height when laid horizontally 2-5/16 Inches (58 mm) without the Chuck on it. When Chuck is mounted, the total height becomes 130 mm. Center Height in vertical position: 2-1/8 (53.5 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. Base Dimensions : 135 mm x 105 mm with 2 x U slots (9.5 mm). Body is painted and Rest all working surfaces are precision ground. The Dial and locking screws are plated and Handle has epoxy black finish for a rust free life. Smooth Jerk free easy rotation with negligible play. The top of the table is ground to eliminate any excess run out. It is mainly used to cut gear teeth accurately and equal spacing of the teeth of the gear. Also used for milling gears, splines, squares, cutting of flutes in reamers, drills and milling cutters, racks, grinders, etc. Supplied with 80 mm 3 jaw self centering chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 4/100 mm Rotary table. The Back plate is drilled with M6 size tapped holes for the chuck’s bolts to be screwed with the back plate and then provided with 2 counter drills to them clamp it with the Rotary table’s T slots. The Chuck body is made of high grain casting and the jaws are made of hardened tool steel for a long life. The chuck recess is 55 mm same as that of the back plate. The back plate has a 13.9 mm small spigot that helps it in centrally locate it in the center of the Rotary Table. (With 3/ 80 mm Tilting Rotary Table). Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3Inches) and is most popular light weight tilting rotary table for small and light duty milling operations. Designed to tilt between 0- 90 Degrees & can be locked at any working angle position. Total Height when laid flat is 2-7/16 (62 mm) without the Chuck on it. When Chuck is mounted, the total height becomes 135 mm. Center Height in vertical position: 2-17/32 (61.5 mm approx). Base Dimensions : 100 x 105 mm with 2 x Drills (8 mm diameter) at a PCD of 82 mm approx. Weight of the Rotary Table : 2.700 Kgs. Supplied with a suitable M6 clamp kit which is hardened and ground before the epoxy black finish for a rust free life. Supplied with 80 mm 3 jaw self centering chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 3 /80 mm Tilting Rotary table. (With 3/80 mm Rotary Table). Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3Inches) and is most popular light weight rotary table for small and light duty milling operations. Total Height when laid flat is 1-3/4 (44 mm) without the Chuck on it. When Chuck is mounted, the total height becomes 115 mm. Center Height in vertical position: 1-3/4 (45 mm approx) without the chuck. Can be clamped both Horizontally and Vertically. Rotary Table’s Base Dimensions : 110 x 85 mm with 2 x U slots (7.5 mm wide) each wall for Horizontal and Vertical clamping purpose. Supplied with 80 mm 3 jaw self centering chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 3 /80 mm Rotary table. (With 4/ 100 mm Tilting Rotary Table). Brand New High Quality 4 /100 mm Precision Tilting Rotary Table Features to tilts between 0- 90 Degrees & can be locked at any working position. Provided with oil nipple for oiling of inside body. Center Height in horizontal position when lay flat : 2-3/4 (70 mm approx) without the Chuck on it. When Chuck is mounted, the total height becomes 140 mm. Center Height in vertical position: 3 Inch approx (77 mm). Body & table are made of caste Iron. Rest of the parts are made of tool steel. Body is painted black. Knobs, dials and locking screws are all plated and Rest of the working surface are precisely ground. Rotary’s handle are knurled for firm gripping while rotating and epoxy black finish for a long rust free life. Base Dimensions : 142 x 128 mm. 2 Opposite counter drills of 9.5 mm diameter are located at a PCD of 102 mm approx for mounting. Supplied with 80 mm 3 jaw self centering chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 4 /100 mm Tilting Rotary table. (Only 80 MM 4 Jaw Chuck with Back Plate). Quality 80 mm Diameter 4 Jaw Independent Chuck. Body is made of Graded Casting. Jaws are of Alloy Tool Steel -Hardened and Ground. Supplied with a Tool Steel Back Plate having same recess as that of the chuck. The plate is threaded drilled in a manner that the chuck can be screwed to the Back Plate. The Back plate has been counter drilled to fit to our 3″/ 80mm & 4″/ 100 mm Rotary tables. The other side of the Back plate has a small spigot to fit /adjust into the center of the Rotary table for better accuracy and Fitting. Vices & Work Holding. Measuring Tools & Equipments. Jewellery & Watch Making&########x9. Do It Yourself (DIY Tools)&########x9. HSS Cutting & Finishing Tools. 80 mm 4 Jaw Self Centering Chuck with Back Plate Rotary Table (USA Fulfilled). You will be glad to know that our tools are being manufactured in our own production facility in New Delhi (India) and are being inspected to ensure that they meet the required International quality benchmark as well as the expectations of our customers. We hold the Inventory of our good sellers in the USA & UK to offer the quickest possible deliveries to our customers. Pls note:- 1/. It is important to note that after the pandemic, although the logistic services have been improved a lot. However, they are still to reach their original positions. We expect our customers to understand and support us in such issues which are unforeseen and not in our control. However, we take complete onus and responsibility of supplying you with a completely brand-new product without any manufacturing or transit damage. Though we packed our goods with utmost care and strong packaging material, since our products are heavy, there could be transit damage in a few cases. However, it has been seen that such issues are not always a problem and our customers could still use them. In the majority of the cases, we have experienced that we manage to resolve the issue amicably without any trouble. So a discussion is the best way of a desired resolution. SEE OUR OTHER ITEMS FOR SALE. 80 mm 4 Jaws Independent Dog chuck with Back Plate & T nuts – (USA FULFILLED). 3 Pieces Spring Caliper Set – Inside, Outside & Divider 6 inch (USA FULFILLED). KNURLING TOOL PIVOT HEAD DIAMOND METRIC PITCHES PATTERN 1/2 SQ. Assorts Ball Turning Attachment (Exclusive Feature of Bearing Base) ROUND BASE. Single wheel knurling tool holder with 5 spare HSS knurls (USA FULFIILED). 4 (100 MM) ROTARY TABLE WITH 65MM 3 JAWS & 70MM 4 JAWS WITH BACK PLATE & TNUTS. Automatic Center Punch with Replaceable Hardened Steel Tip tool (USA FULFILLED). T-HANDLE TAP WRENCH SET OF 3 PCS SOLID COLLET JAWS – (USA FULFILLED). Supreme die holder with chuck. Single Wheel Straight Linear Knurling Hand Tool 3/4″ x 3/4″ x 5 (USA FULFILLED). Clamp Type Lathe Knurling Tools II 3/8″ Sq x Long 5-3/4″ Inch Tail (USA FULFILL). 4 regular Rotary Table +70 mm 4 Jaw Chuck+ Back Plate+ Fixing USA FULFILLED. Floating Tailstock Die holder 2MT Shank-Imperial Dies – USA FULFILLED. Spring Loaded Clamp Type Knurling Tool 2″ Capacity 3/8″ Hand Tools USA FULFILLED. HV6-4 Slots Rotary Table & Steel Dividing Plates Set USA FULFILLED. SLITTING/SLOTTING SAW HOLDER WITH CIRCULAR SAW BLADE – USA Fulfilled. New Mini V-Clamp Adjustable Spring Type Knurling Tool. Lathe Tailstock Die Holder – Tapping Threading Reaming Drilling Tools (MT3). Assorts Lathe Tool Ball Turning Attachment Oval Base- Single Bit (USA FULFILLED). Spindle Live Revolving Center, Morse Taper MT4 with Interchangeable Tips. Listing and template services provided by inkFrog.
80 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
back, chuck, fulfilled, independent, plate, rotary, table
next page
70_mm_4_Jaw_Independent_Chuck_with_Back_Plate_Rotary_Table_USA_Fulfilled_01_uhao

70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)

70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)

70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
(With 4/ 100 mm Rotary Table). Made of Caste Iron, Precision High Quality 4 /100 mm Regular Rotary Table designed for smaller milling machines. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Can be clamped vertically and horizontally both ways. Height when laid horizontally 2-5/16 Inches (58 mm) without the Chuck on it. When Chuck is mounted, the total height becomes 130 mm. Center Height in vertical position: 2-1/8 (53.5 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. Base Dimensions : 135 mm x 105 mm with 2 x U slots (9.5 mm). Body is painted and Rest all working surfaces are precision ground. The Dial and locking screws are plated and Handle has epoxy black finish for a rust free life. Smooth Jerk free easy rotation with negligible play. The top of the table is ground to eliminate any excess run out. It is mainly used to cut gear teeth accurately and equal spacing of the teeth of the gear. Also used for milling gears, splines, squares, cutting of flutes in reamers, drills and milling cutters, racks, grinders, etc. Supplied with 70 MM 4 JAW INDEPENDENT chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 4/100 mm Rotary table. The Back plate is drilled with M6 size tapped holes for the chuck’s bolts to be screwed with the back plate and then provided with 2 counter drills to them clamp it with the Rotary table’s T slots. (With 3/ 80 mm Tilting Rotary Table). Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3Inches) and is most popular light weight tilting rotary table for small and light duty milling operations. Designed to tilt between 0- 90 Degrees & can be locked at any working angle position. Total Height when laid flat is 2-7/16 (62 mm) without the Chuck on it. When Chuck is mounted, the total height becomes 135 mm. Center Height in vertical position: 2-17/32 (61.5 mm approx). Base Dimensions : 100 x 105 mm with 2 x Drills (8 mm diameter) at a PCD of 82 mm approx. Weight of the Rotary Table : 2.700 Kgs. Supplied with a suitable M6 clamp kit which is hardened and ground before the epoxy black finish for a rust free life. Supplied with 80 mm 3 jaw self centering chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 3 /80 mm Tilting Rotary table. (With 3/80 mm Rotary Table). Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3Inches) and is most popular light weight rotary table for small and light duty milling operations. Total Height when laid flat is 1-3/4 (44 mm) without the Chuck on it. When Chuck is mounted, the total height becomes 115 mm. Center Height in vertical position: 1-3/4 (45 mm approx) without the chuck. Can be clamped both Horizontally and Vertically. Rotary Table’s Base Dimensions : 110 x 85 mm with 2 x U slots (7.5 mm wide) each wall for Horizontal and Vertical clamping purpose. Supplied with 80 mm 3 jaw self centering chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 3 /80 mm Rotary table. (With 4/ 100 mm Tilting Rotary Table). Brand New High Quality 4 /100 mm Precision Tilting Rotary Table Features to tilts between 0- 90 Degrees & can be locked at any working position. Provided with oil nipple for oiling of inside body. Center Height in horizontal position when lay flat : 2-3/4 (70 mm approx) without the Chuck on it. When Chuck is mounted, the total height becomes 140 mm. Center Height in vertical position: 3 Inch approx (77 mm). Body & table are made of caste Iron. Rest of the parts are made of tool steel. Body is painted black. Knobs, dials and locking screws are all plated and Rest of the working surface are precisely ground. Rotary’s handle are knurled for firm gripping while rotating and epoxy black finish for a long rust free life. Base Dimensions : 142 x 128 mm. 2 Opposite counter drills of 9.5 mm diameter are located at a PCD of 102 mm approx for mounting. Supplied with 80 mm 3 jaw self centering chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 4 /100 mm Tilting Rotary table. (Only 70 MM 4 Jaw Chuck with Back Plate). Brand New, High Precision- Superb Quality! 70 mm 4 Jaws Self Centering Chuck with Back Plate & Fixing- Suitable to Mount on 3″ (75 mm) & 4″ (100 mm) Rotary Table -4 Slots Tables. Designed to fit our 3 or 4 Rotary table 4 slots. The chuck mounting is standard Uni-mat Thread M14 x 1. Vices & Work Holding. Measuring Tools & Equipments. Jewellery & Watch Making&########x9. Do It Yourself (DIY Tools)&########x9. HSS Cutting & Finishing Tools. 70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled). You will be glad to know that our tools are being manufactured in our own production facility in New Delhi (India) and are being inspected to ensure that they meet the required International quality benchmark as well as the expectations of our customers. We hold the Inventory of our good sellers in the USA & UK to offer the quickest possible deliveries to our customers. Pls note:- 1/. It is important to note that after the pandemic, although the logistic services have been improved a lot. However, they are still to reach their original positions. We expect our customers to understand and support us in such issues which are unforeseen and not in our control. However, we take complete onus and responsibility of supplying you with a completely brand-new product without any manufacturing or transit damage. Though we packed our goods with utmost care and strong packaging material, since our products are heavy, there could be transit damage in a few cases. However, it has been seen that such issues are not always a problem and our customers could still use them. In the majority of the cases, we have experienced that we manage to resolve the issue amicably without any trouble. So a discussion is the best way of a desired resolution. SEE OUR OTHER ITEMS FOR SALE. 80 mm 4 Jaws Independent Dog chuck with Back Plate & T nuts – (USA FULFILLED). 3 Pieces Spring Caliper Set – Inside, Outside & Divider 6 inch (USA FULFILLED). KNURLING TOOL PIVOT HEAD DIAMOND METRIC PITCHES PATTERN 1/2 SQ. Assorts Ball Turning Attachment (Exclusive Feature of Bearing Base) ROUND BASE. Single wheel knurling tool holder with 5 spare HSS knurls (USA FULFIILED). 4 (100 MM) ROTARY TABLE WITH 65MM 3 JAWS & 70MM 4 JAWS WITH BACK PLATE & TNUTS. Automatic Center Punch with Replaceable Hardened Steel Tip tool (USA FULFILLED). T-HANDLE TAP WRENCH SET OF 3 PCS SOLID COLLET JAWS – (USA FULFILLED). Supreme die holder with chuck. Single Wheel Straight Linear Knurling Hand Tool 3/4″ x 3/4″ x 5 (USA FULFILLED). Clamp Type Lathe Knurling Tools II 3/8″ Sq x Long 5-3/4″ Inch Tail (USA FULFILL). 4 regular Rotary Table +70 mm 4 Jaw Chuck+ Back Plate+ Fixing USA FULFILLED. Floating Tailstock Die holder 2MT Shank-Imperial Dies – USA FULFILLED. Spring Loaded Clamp Type Knurling Tool 2″ Capacity 3/8″ Hand Tools USA FULFILLED. HV6-4 Slots Rotary Table & Steel Dividing Plates Set USA FULFILLED. SLITTING/SLOTTING SAW HOLDER WITH CIRCULAR SAW BLADE – USA Fulfilled. New Mini V-Clamp Adjustable Spring Type Knurling Tool. Lathe Tailstock Die Holder – Tapping Threading Reaming Drilling Tools (MT3). Assorts Lathe Tool Ball Turning Attachment Oval Base- Single Bit (USA FULFILLED). Spindle Live Revolving Center, Morse Taper MT4 with Interchangeable Tips. Listing and template services provided by inkFrog.
70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
back, chuck, fulfilled, independent, plate, rotary, table
next page
3_4_slots_Rotary_Table_70mm_4_jaws_Independent_chuck_Back_Plate_Ship_From_USA_01_vzje

3 4 slots Rotary Table + 70mm 4 jaws Independent chuck+Back Plate-Ship From USA

3 4 slots Rotary Table + 70mm 4 jaws Independent chuck+Back Plate-Ship From USA
3 4 slots Rotary Table + 70mm 4 jaws Independent chuck+Back Plate-Ship From USA
3 4 slots Rotary Table + 70mm 4 jaws Independent chuck+Back Plate-Ship From USA
3 4 slots Rotary Table + 70mm 4 jaws Independent chuck+Back Plate-Ship From USA
3 4 slots Rotary Table + 70mm 4 jaws Independent chuck+Back Plate-Ship From USA

3 4 slots Rotary Table + 70mm 4 jaws Independent chuck+Back Plate-Ship From USA
3 Inches (75 mm) (4 slots) Rotary Table + 70 mm 4 jaws Independent chuck+ Back Plate. Mini Low Profile 3 Inches / 80 Mm Rotary Table Diameter. 70 Mm Independent Chuck, Back Plate & T Nuts. Perfect For Small Light Duty Milling Jobs When You Have To Cut Through The Vertical Axis On Regular Intervals. Worm: Gear Ratio Is 36: 1, Which Means That 1 Handle Rotation Shall Turn The Handle By 10 Degrees. Table Calibrated 360 Degrees. Can Be Mounted Horizontally And Vertically Both.
3 4 slots Rotary Table + 70mm 4 jaws Independent chuck+Back Plate-Ship From USA
70mm, chuckback, independent, jaws, plate-ship, rotary, slots, table
next page
3_80_mm_Milling_Rotary_Table_With_70_mm_4_Jaw_Independent_Chuck_USA_Fulfilled_01_kuwh

3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled

3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled
3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled
3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled
3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled
3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled
3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled
3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled
3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled

3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled
A PERFECT MILLING COMBO FOR YOUR SMALL MILLING MACHINE NEEDS. 3/ 80 MM MILLING ROTARY TABLE WITH 70 MM 4 JAW INDEPENDENT CHUCK. THE ROTARY TABLE AND CHUCK ASSEMBLY CAN BE MOUNTED BOTH HORIZONTALLY & VERTICALLY.
3/ 80 mm Milling Rotary Table With 70 mm 4 Jaw Independent Chuck- USA Fulfilled
chuck, fulfilled, independent, milling, rotary, table
next page
3_80_MM_Milling_Rotary_Table_With_70_MM_4_Jaw_Independent_Chuck_usa_Fulfilled_01_ycu

3/ 80 MM Milling Rotary Table With 70 MM 4 Jaw Independent Chuck-usa Fulfilled

3/ 80 MM Milling Rotary Table With 70 MM 4 Jaw Independent Chuck-usa Fulfilled
3/ 80 MM Milling Rotary Table With 70 MM 4 Jaw Independent Chuck-usa Fulfilled
3/ 80 MM Milling Rotary Table With 70 MM 4 Jaw Independent Chuck-usa Fulfilled
3/ 80 MM Milling Rotary Table With 70 MM 4 Jaw Independent Chuck-usa Fulfilled
3/ 80 MM Milling Rotary Table With 70 MM 4 Jaw Independent Chuck-usa Fulfilled
3/ 80 MM Milling Rotary Table With 70 MM 4 Jaw Independent Chuck-usa Fulfilled

3/ 80 MM Milling Rotary Table With 70 MM 4 Jaw Independent Chuck-usa Fulfilled
A PERFECT MILLING COMBO FOR YOUR SMALL MILLING MACHINE NEEDS. 3/ 80 MM MILLING ROTARY TABLE WITH 70 MM 4 JAW INDEPENDENT CHUCK. MILLING ROTARY TABLE WITH CHUCK. THE ROTARY TABLE AND CHUCK ASSEMBLY CAN BE MOUNTED BOTH HORIZONTALLY & VERTICALLY.
3/ 80 MM Milling Rotary Table With 70 MM 4 Jaw Independent Chuck-usa Fulfilled
chuck-usa, fulfilled, independent, milling, rotary, table
next page
HV_4_Rotary_Table_With_70mm_4_Jaw_Independent_Chuck_Lathe_Backplate_T_nuts_01_cou

HV 4 Rotary Table With 70mm 4 Jaw Independent Chuck Lathe + Backplate T-nuts

HV 4 Rotary Table With 70mm 4 Jaw Independent Chuck Lathe + Backplate T-nuts
HV 4 Rotary Table With 70mm 4 Jaw Independent Chuck Lathe + Backplate T-nuts
HV 4 Rotary Table With 70mm 4 Jaw Independent Chuck Lathe + Backplate T-nuts
HV 4 Rotary Table With 70mm 4 Jaw Independent Chuck Lathe + Backplate T-nuts
HV 4 Rotary Table With 70mm 4 Jaw Independent Chuck Lathe + Backplate T-nuts
HV 4 Rotary Table With 70mm 4 Jaw Independent Chuck Lathe + Backplate T-nuts
HV 4 Rotary Table With 70mm 4 Jaw Independent Chuck Lathe + Backplate T-nuts
HV 4 Rotary Table With 70mm 4 Jaw Independent Chuck Lathe + Backplate T-nuts
HV 4 Rotary Table With 70mm 4 Jaw Independent Chuck Lathe + Backplate T-nuts
HV 4 Rotary Table With 70mm 4 Jaw Independent Chuck Lathe + Backplate T-nuts

HV 4 Rotary Table With 70mm 4 Jaw Independent Chuck Lathe + Backplate T-nuts
70mm 4 Jaw Independent Chuck. Backplate is drilled and counterbored to fit a range of 3″ and 4″ rotary tables with 4 Slots. 70mm 4 Jaw Independent Chuck. 4? (100 mm) Rotary Table. Supplied complete with a key as well as set of tee nuts and studs to secure it into place.
HV 4 Rotary Table With 70mm 4 Jaw Independent Chuck Lathe + Backplate T-nuts
70mm, backplate, chuck, independent, lathe, rotary, t-nuts, table
next page
Rotary_Table_4_Slot_4_Horizontal_Vertical_65mm_Independent_01_fso

Rotary Table 4 Slot 4 Horizontal Vertical +65mm Independent

Rotary Table 4 Slot 4 Horizontal Vertical +65mm Independent

Rotary Table 4 Slot 4 Horizontal Vertical +65mm Independent
Rotary Table 4 Slot 4 Horizontal – Vertical +65mm Independent. Suitable for horizontal and vertical machining applications. Features a +65mm independent movement for added versatility and precision. 4 slots for securing workpieces or fixtures. Dual horizontal and vertical mounting options for enhanced flexibility. Independent +65mm movement for precise adjustments and fine-tuning. Crafted for precision machining tasks. Durable construction for long-lasting performance. Unlock a new level of precision and versatility in your machining projects with our Rotary Table. This exceptional tool is meticulously engineered to meet the demands of both horizontal and vertical applications while featuring a unique +65mm independent movement for fine-tuning and precise adjustments. Dual Mounting Options: Whether you need horizontal or vertical orientation, this rotary table has you covered. With the ability to seamlessly switch between these two configurations, you can handle a wide range of machining tasks with ease. Secure 4-Slot Design: The table comes equipped with four strategically placed slots, ensuring a firm and stable grip on your workpieces or fixtures. This means you can work confidently, knowing your materials will remain securely in place throughout your project. Independent +65mm Movement: What sets this rotary table apart is its independent +65mm movement feature. This allows you to make precise adjustments and fine-tune your machining operations with unparalleled accuracy. Built for Precision: Crafted with precision machining in mind, this rotary table is engineered to deliver consistent and exact results every time you use it. It’s a valuable addition to any professional or hobbyist workshop. Durability Guaranteed: Built to withstand the rigors of machining, this rotary table boasts a durable construction that ensures longevity and dependable performance, even under heavy workloads.
Rotary Table 4 Slot 4 Horizontal Vertical +65mm Independent
65mm, horizontal, independent, rotary, slot, table, vertical
next page
Tilting_Rotary_Table_4_100mm_With_70mm_Independent_Chuck_Backplate_01_sxc

Tilting Rotary Table 4/100mm With 70mm Independent Chuck Backplate

Tilting Rotary Table 4/100mm With 70mm Independent Chuck Backplate
Tilting Rotary Table 4/100mm With 70mm Independent Chuck Backplate
Tilting Rotary Table 4/100mm With 70mm Independent Chuck Backplate
Tilting Rotary Table 4/100mm With 70mm Independent Chuck Backplate
Tilting Rotary Table 4/100mm With 70mm Independent Chuck Backplate

Tilting Rotary Table 4/100mm With 70mm Independent Chuck Backplate
Tilting Rotary Table 4/100MM with 70MM Independent Chuck Backplate. Rotary Table Horizontal Vertical 4 / 100 mm Tilting with 70 mm Independent Chuck BackPlate for Milling Machine. Hor/vert Rotary Table 4Tilting. Table height 66 mm in flat position Table graduated 360 degrees in 5 degree divisions. Base is 145 mm x 126 mm with two 10 mm mounting holes separated by 110mm The table tilts upto 90 degrees and can be used anywere Chuck Diameter :70mm. Vertical center Height : 21/16 (Approx 51 mm) Hand Wheel can be set to Zero Hand Wheel Graduated in 10 Min Divisions. Calibrated in 5 Min Increment around the rim 36:1 ratio Can be used both Vertical Horizontal.
Tilting Rotary Table 4/100mm With 70mm Independent Chuck Backplate
4100mm, 70mm, backplate, chuck, independent, rotary, table, tilting
next page
4_100_MM_Rotary_Table_With_70_MM_4_Jaw_Independent_Chuck_Milling_USA_Fulfilled_01_pck

4/100 MM Rotary Table With 70 MM 4 Jaw Independent Chuck Milling USA Fulfilled

4/100 MM Rotary Table With 70 MM 4 Jaw Independent Chuck Milling USA Fulfilled
4/100 MM Rotary Table With 70 MM 4 Jaw Independent Chuck Milling USA Fulfilled
4/100 MM Rotary Table With 70 MM 4 Jaw Independent Chuck Milling USA Fulfilled
4/100 MM Rotary Table With 70 MM 4 Jaw Independent Chuck Milling USA Fulfilled
4/100 MM Rotary Table With 70 MM 4 Jaw Independent Chuck Milling USA Fulfilled
4/100 MM Rotary Table With 70 MM 4 Jaw Independent Chuck Milling USA Fulfilled
4/100 MM Rotary Table With 70 MM 4 Jaw Independent Chuck Milling USA Fulfilled
4/100 MM Rotary Table With 70 MM 4 Jaw Independent Chuck Milling USA Fulfilled

4/100 MM Rotary Table With 70 MM 4 Jaw Independent Chuck Milling USA Fulfilled
3 (80 mm) Rotary Table- 4 Slots Table This Set includes Following. 2 x step blocks 2 x tee bolts with flanged nut M6 thread 2 x clamps. Table scale is calibrated in 5 degree increement. Can be used both in horizontal & vertical position. 1/4″ 4 T-Slots: 5/16″. SUITABLE M6 CLAMP KIT FOR THIS ROTARY TABLE This will fit both the Horizontal & Tilting model of our 3″ (80 mm) & 4″ (100 mm) Rotary – 4 Slots Table This Set includes Following: 2 x step blocks 2 x tee bolts with flanged nut M6 thread 2 x clamps Bolt length: 55 mm overall & Bolt Thread M6. Vices & Work Holding. Measuring Tools & Equipments. Jewellery & Watch Making&########x9. Do It Yourself (DIY Tools)&########x9. HSS Cutting & Finishing Tools. HV 3 inch -80 mm Rotary Table Indexing with M6 Clamp Kit Milling- USA FULFILLED. SEE OUR OTHER ITEMS FOR SALE. 50 mm/ 2 Inches Quick Release Steel Vise for Micro Milling Drill USA FULFILLED. Mini Vertical Slide (90 x 50 mm) for instant Milling Lathe Tool- (USA FULFILLED). Rigit Tailstock Die Holder for threading on Lathe Machine Tool (USA FULFILLED). ER-20 Collet Adapter for Instant Milling-Fits to 3″75 mm/ 4″ 100MM-USA FULFILLED. MT4 Triple Bearing Lathe Revolving Center For Metalworking-Under 5 Micron USA. 70 mm 4 Jaws Independent Chuck with Back Plate Milling Lathe Tool USA FULFILLED. Caste Iron 100 mm/ 4 Stepped Angle Plate Milling Machine Lathe USA FULFILLED. New Tool Post Mini Vertical Slide with 2 50 mm Steel Vice Milling USA FULFILLED. V Block Jig Fixture for Center Drilling on a Round Work-piece 2 (USA FULFILLED). 35mm Engineer Easy Bell Punch Hand DIY Tool Find Center Round Bar-USA FULFILLED. Caste Iron Small 1.5 Inches (38 mm) Jaw width Drill Press Vice Vise Machine. Caste Iron 100mm Round Vice for 4 (100mm) Rotary Table+M6 T-nut (USA FULFILLED). You will be glad to know that our tools are being manufactured in our own production facility in New Delhi (India) and are being inspected to ensure that they meet the required International quality benchmark as well as the expectations of our customers. We hold the Inventory of our good sellers in the USA & UK to offer the quickest possible deliveries to our customers. Pls note:- 1/. It is important to note that after the pandemic, although the logistic services have been improved a lot. However, they are still to reach their original positions. We expect our customers to understand and support us in such issues which are unforeseen and not in our control. However, we take complete onus and responsibility of supplying you with a completely brand-new product without any manufacturing or transit damage. Though we packed our goods with utmost care and strong packaging material, since our products are heavy, there could be transit damage in a few cases. However, it has been seen that such issues are not always a problem and our customers could still use them. In the majority of the cases, we have experienced that we manage to resolve the issue amicably without any trouble. So a discussion is the best way of a desired resolution. Listing and template services provided by inkFrog.
4/100 MM Rotary Table With 70 MM 4 Jaw Independent Chuck Milling USA Fulfilled
chuck, fulfilled, independent, milling, rotary, table
next page
Rotary_Table_4_100mm_With_70mm_Independent_Chuck_Backplate_01_fr

Rotary Table 4/100mm With 70mm Independent Chuck & Backplate

Rotary Table 4/100mm With 70mm Independent Chuck & Backplate
Rotary Table 4/100mm With 70mm Independent Chuck & Backplate

Rotary Table 4/100mm With 70mm Independent Chuck & Backplate
Rotary Table Horizontal & Vertical 4 / 100 mm with. 70 mm Independent Chuck & Back plate for Milling Machine. Vertical center Height : 2-1/16 (Approx 51 mm). Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. Calibrated in 5 Min Increment around the rim. Can be used both Vertical & Horizontal. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “expert.tools” and is located in this country: IN. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Custom Bundle: No
  • Setting Position: Horizontal/Vertical
  • Tilting: No
  • Rotary Table Size: 4 in
  • Table Height: 66 mm
  • No. of Slot: 4
  • Jaws: 4
  • Chuck Size: 70 mm
  • Operation: Manual
  • Cross-Slide: No
  • Brand: RUTWIK ENGINEERS

Rotary Table 4/100mm With 70mm Independent Chuck & Backplate
4100mm, 70mm, backplate, chuck, independent, rotary, table
next page