Month: November 2020
8 Table Diam, Horizontal & Vertical Rotary Machining Table
8 Table Diam, Horizontal & Vertical Rotary Machining Table. The item “8 Table Diam, Horizontal & Vertical Rotary Machining Table” is in sale since Monday, November 9, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “streetrodengines” and is located in Rowlett, Texas. This item can be shipped to United States.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: 8inch phase 2
- Brand: Phase 2
ROTARY TABLE 100MM/4 WITH 100MM ROTARY VICEused in both horizontal & vertical
ROTARY TABLE 100 MM. 100 MM ROTARY VICE. 4 Inch (100 mm) Rotary Table’s is a Precision Small Rotary Table for Milling operation. Its Table Diameter is 4 or (100 mm) with 3 slots. Height – 47 mm. Worm- Gear Ratio – 36:1, which basically means that 1 handle rotation shall turn the table by 10 Degrees. Table graduated in 360 Degrees & the scale calibrated in 5 degree increment. Centre Height in Vertical position is 52 mm. Can be used in both horizontal & vertical position. This combination completes with our high grade close grain caste Iron. Fits our 4 (100 mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. The item “ROTARY TABLE 100MM/4 WITH 100MM ROTARY VICEused in both horizontal & vertical” is in sale since Saturday, July 11, 2020. This item is in the category “Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “toolsforexperts” and is located in Delhi. This item can be shipped worldwide.
- MPN: Does Not Apply
- Function: Milling
New Toolman Rotary Table 4.5/16/110mm Kit Dividing Plate Tail Stock & Clamp Set
Integrates of Rotary Kit. Rotary Table 4.5/16 / 110 mm. Tail stock which is suitable for Rotary Table. Weight of Kit :- 14.5 Kgs / 31.9 Lbs. Gear Ratio:- 90:1. Made of ductile cast iron and precision ground The worktable is graduated to a full 360° MT 2 center for holding work pieces worm gear ration is 90:1 making one turn of the handle move the table 4° vernier scale makes setting down to 10 secs possible quick release system for manual indexing. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular tool path, on small milling machines. To cut straight lines &. Height can be varied while working with different index centers while the angle of inclination can be changed for various machining applications. The tip of center is finely rotatable. The dead center of the tail stock should be in line with the center of the rotary table. Tail stock suitable for 6″ & 4.5/16″ Rotary Table. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a rotary table. On a milling machine. Usually used to apply support to the longitudinal rotary. Axis of a work-piece being machined. Center is mounted in the tail stock, and inserted against the sides of a hole in the center of the work-piece. A tail stock has a Dead center, while. A Tail stock is particularly useful when the work-piece is relatively long and slender. 6.1/4 / 108mm. 3.3/16 / 80mm. The divisions of preset holes are provided for the most common angles such as 30, 45 and 90. The remaining divisions of the circle are provided for manually rotating the dividing arm using the plates. Term & Conditions. The color of item can be vary depend upon availability. The item “New Toolman Rotary Table 4.5/16/110mm Kit Dividing Plate Tail Stock & Clamp Set” is in sale since Thursday, March 14, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped worldwide.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
- Tilting: No
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Rotary Table Dia: 4.5/16″ / 110 mm
- Modified Item: No
- Country/Region of Manufacture: India
- Weight of Kit: 14.5 Kgs / 31.9 Lbs
- Operation: Manual
- Gear Ratio: 90:1
- Brand: Unbranded
Rotary Axis Rotary Chuck Rotating Shaft with Driver for Laser Marking Machine
Rotary Axis Rotary Chuck Rotating Shaft with Driver for Laser Marking Machine. This rotary device is used with our fiber laser marking machine. It fits our machine well. Any questions, please feel free to leave me a message. I will reply you within 24 hours. Track Page Views With. Auctiva’s FREE Counter. The item “Rotary Axis Rotary Chuck Rotating Shaft with Driver for Laser Marking Machine” is in sale since Tuesday, January 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “sfx-portable-edm” and is located in Luoyang, Henan. This item can be shipped worldwide.
- Brand: SFX
- MPN: Does Not Apply
- Operation: Manual
- Setting Position: Horizontal/Vertical
New Rotary Table 4/100 mm kit 4Jaw Chuck with Back Plate Tail Stock &Clamps Set
Integrates of Rotary Kit. Rotary Table 4/100 mm. 2 4 Jaw Chuck with Back Plate 80 mm. Weight of Kit :- 9 Kgs / 19.8 Lbs. Chuck Size :- 80 mm. 3.3/8 / 85 mm. 1.1/2 / 38 mm. Precision ground horizontally and vertically. Graded cast iron and precision ground. The work table is graduated to full 360 degrees. Gear Ratio 36:1. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws. There is a fixture plate on which the chuck is mounted. Height can be varied while working with different index centers while the angle of inclination can be changed for various machining applications. The tip of center is finely rotatable. The dead center of the tail stock should be in line with the center of the rotary table. Tail stock suitable for 4″ /100 mm” Rotary Table. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a rotary table. On a milling machine. Usually used to apply support to the longitudinal Ro. Axis of a work piece being machined. Is mounted in the tail stock, and inserted against the sides of a hole in the center of the work piece. A tail stock has a Dead Center, while. A Tail stock is particularly useful when the work piece is relatively long and slender. Term & Conditions. The colour of item can be vary depend upon availability. The item “New Rotary Table 4/100 mm kit 4Jaw Chuck with Back Plate Tail Stock &Clamps Set” is in sale since Friday, March 29, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Country/Region of Manufacture: India
- Weight of Kit: 9 Kgs / 19.8 Lbs
- Operation: Manual
- Chuck Size: 80 MM
- Brand: Unbranded
VERTEX HV-6 (4-Slot) 6 Horizontal/Vertical Rotary Table with 4-Slot Face Plate
VERTEX HV-6 (4-Slot) 6 Horizontal/Vertical Rotary Table with 4-Slot Face Plate. Vertex HV-6 Horizontal/Vertical Rotary Table Special order with 4-slot face plate. Our Tables are made of high density Meehanite and use “HEIDENHAIN” electronic equipment to inspect angle to assure the excellent quality and durableness. Use excellent machining center to process. Spindle end be applied accuracy bearing. Can be assured to keep very steady under load cutting. Worm is hardened and ground. The ratio is 90:1. The work table is graduated a full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1’min. And vernier scale makes settings down to 10 seconds possible. These Rotary Tables are popular for their excellent performance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work. Using the Key guide block, the center can be corrected quickly and accurately. If You have any questions regarding this item, please let us know we’ll be happy to help. The item “VERTEX HV-6 (4-Slot) 6 Horizontal/Vertical Rotary Table with 4-Slot Face Plate” is in sale since Thursday, November 5, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped worldwide.
- Brand: VERTEX
- MPN: HV-6-4-SLOT
- Country/Region of Manufacture: Taiwan
- Model: HV-6-4-SLOT
6 Rotary Table 3 Slot Horizontal & Vertical With M8 Clamping Kit
Precision Rotary Table 6/150 mm. With M8 Clamping Kit. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. T Slot 16 mm. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “6 Rotary Table 3 Slot Horizontal & Vertical With M8 Clamping Kit” is in sale since Wednesday, September 23, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “perfetto_pan” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- MPN: Does Not Apply
- Brand: Unbranded/Generic
Tilting Rotary Table 3/80mm With 50mm Mini Lathe Chuck & Backplate
ROTARY TABLE 3 TILTING + BACK PLATE + 50 MM CHUCK. 3 / 75 mm Tilting Rotary table. Of a back plate which has holes in a manner that it can be fitted on to a 3 slot as well 4 slot Rotary table. Of a 50 mm 3 Jaw self centering Chuck and 3 set of T nut to clamp the Back Plate with the Tee slots of the Rotary Table. High Precision Mini Rotary Table tilting type 75 mm (3 Inches). Overall Height is a non tilting position is around 55 mm. Table is graduated 0- 360 degrees in 5 degree divisions. Rotating handle is graduated 0- 10 degrees in 5 minutes divisions. Table can tilt upto any position 0 to 90 degrees and locked at any position as per the requirement. It is having gunmetal gear and EN8 (form of steel) worm combination to have a minimum wear and tear to give a long life with negligible play to the product. Minimum possible friction means long life and best performance! The item “TILTING ROTARY TABLE 3/80MM WITH 50MM MINI LATHE CHUCK & BACKPLATE” is in sale since Tuesday, June 16, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “expert.tools” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: Yes
- Rotary Table Size: 3 Inch
- Chuck Size: 50 mm
- Slots: 4
- Jaws: 3
- Backplate Threaded: 12 x 1
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: RUTWIK ENGINEERS
