horizontal
Rotary Table 4 Inch 100mm HV4 3 Slot Precision Horizontal Vertical Milling
Rotary Table 4 100mm HV4 3 Slot. Deluxe Rotary Table For Small Milling Machine. Reduction Gives Precise Adjustment : 90:1. Centre Height When Mounted Vertically : 3-5/16 (85mm). This Is A Compact, High Specification Rotary Table And Suitable For Use On The Smaller Milling Machines. It Is Equipped With Twin Table Locking Clamps, Three Tee Slots And Worm Gear Backlash Adjustment. The 90:1 Worm Reduction Gives A Table Rotation Of 4 Degrees Per Turn Of The Wheel And There Are 120 Subdivisions On The Calibration Ring To Give A Resolution 2 Minutes Of Arc, Sufficient For Even The Most Accurate Of Work. Two Slots Machined In The Base Allow For Fitting Tee-slot Locating Keys For Quick And Accurate Location On The Milling Machine Table. Optional Indexing Plates And Tailstock Are Available For More Advanced Operations. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in this country: IN. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Tilting: No
- Centre Height When Mounted Vertically: 3-5/16\
- Packing: Hard Board Box
- Free Shipping: USA & UK
- Slots: 3
- Size: 4\
- Arbor Location: MT2
- Reduction Gives Precise Adjustment: 90:1
- Diameter: 4-5/16\
- Operation: Manual
- Central Location: NO. 2 MORSE TAPER
- Height: 3\
- Cross-Slide: No
- Brand: AUZAAR
Rotary Table 4 100mm Horizontal And Vertical With 65mm 3 Jaw Chuck & Backplate
4 (100mm) Rotary Table + 3 Jaw. (65mm) Self Centering Chuck + Back Plate. Table graduated in 360 Degrees. The scale calibrated in 5 degree increment. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. 3 Jaw Self Centering Chuck (65mm) Dia. 65mm Self Centering Chuck 3 Jaw. Jaws are made of tool steel, hardened & ground. Body is made of graded cast iron. KIT INCLUDES : ROTARY TABLE + CHUCK + BACKPLATE + T-NUTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “gurunanak_international” and is located in this country: IN. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Vertical
- Tilting: No
- Brand: GURUNANAK
6 Precision Horizontal Vertical Rotary Table And Index plate set dividing plate
6 Precision Horizontal Vertical Rotary Table And Index plate set dividing plate. Graduated 360 degree around its circumference and driven by precision gear with 1:90 reduction ratio. One turn by handle moves table 4 degrees. GEAR DRIVE IMMERSED IN IOL. 10 SECONDS VERNIER READING. DUAL POSITIVE ACTION LOCKS. Manufactured from High grade. Casting and powder coated wrinkled finish for smooth looks. Gear Ratio 90:1. T Slot 16 mm. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. PROUDLY MADE IN INDIA. ACTOOLS comprises of a dedicated and skilled team of engineers with an aim of providing you tools of highest indian industrial standards. Situated at the industrial hub of. We specialize in providing complete tooling solutions. Our Motto : Right Quality. We ensure the product reaches you at the earliest. We are looking forward to your positive reviews and to build a long term relationship. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “gurunanak_international” and is located in this country: IN. This item can be shipped worldwide.
- Dividing Plate ‘B\: 21, 23, 27, 29, 31, 33
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- Brand: GURUNANAK
- Dividing Plate ‘C\: 37, 39, 41, 43, 47, 49
- Dividing Plate ‘A:: 15, 16, 17, 18, 19, 20
Precision Rotary Table 6 150mm 3 slots Heavy duty Milling Horizontal Vertical
Precision Rotary Table 6 150mm 3 slots Heavy duty Milling Horizontal Vertical. M anufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Graduated 360 degree around its circumference. PROUDLY MADE IN INDIA. Neu-Werkzeuge comprises of a dedicated and skilled team of engineers with an aim of providing you tools of highest indian industrial standards. Situated at the industrial hub of india we specialize in providing complete tooling solutions. Our Motto : Right Quality. We ensure the product reaches you at the earliest. We are looking forward to your positive reviews and to build a long term relationship. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “neu-werkzeuge2018″ and is located in this country: IN. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- Country/Region of Manufacture: India
- Shipping: EXPRESS
- Brand: Neu-Werkzeuge
- Model: Rotary Table 6\
- Gear Ratio: 90:1
- Center Bore: MT2
- T Slot: 16mm
HV8 vertical horizontal dual purpose milling machine rotary table Indexing plate
HV8 diameter 200mm vertical and horizontal dual purpose milling machine horizontal vertical rotary table high precision. HV series horizontal-vertical indexing plate (vertical-horizontal rotary table) is one of the main accessories of the milling machine, which can be used for indexing drilling or milling, circumferential cutting, boring, countersinking and other work on the milling machine. The worktable has a 360° scale line, a scale ring with a scale value of 1′ and a vernier ring with a minimum differentiation value of 10. The rotary table has a braking and indexing worm shedding mechanism. When the HV series vertical and horizontal turntable is in the vertical position, it can be used in conjunction with the tailstock (special order) to perform circular indexing drilling and milling of more complex workpieces. Made of high-strength FC30 cast iron. Suitable for milling machines or other special machines for cutting and cutting. The new spindle locking system, compared with the traditional bilateral platen type, has stronger locking and more stable cutting. It can be rotated 360 degrees, the handle is rotated 4 degrees, and the minimum scale is drawn for 10 seconds. Can be used in horizontal and vertical directions. Additional special accessories can be made: honeycomb plate and tailstock. Deceleration ratio 1:90. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “business-factory” and is located in this country: CN. This item can be shipped worldwide.
- Brand: Unbranded
- Origin: CN(Origin)
- Certification: NONE
- CNC or Not: Normal
- Type: Universal
- Model Number: HV8
Rotary Table 3 80mm Horizontal Vertical Low Profile With Single Bolt Tailstock
3 ROTARY TABLE WITH SUITABLE SINGLE BOLT TAILSTOCK. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max) : 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″, Rotary Table 3″ Tilting, Rotary Table 4″, Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “protools-2018″ and is located in this country: IN. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal / Vertical
- Tilting: No
- Rotary Table Slots: 4
- Rotary Table Hand Wheel Calibrated To: 10 degree per revolution
- Rotary Table Height: 1-5/8\
- Packing: Hard Board Box
- Free shipping To: USA, UK, Italy, Spain, France, Mexico
- Table Scale Graduated: 5 Degree
- Single Bolt Tailstock Suitable For: Rotary Table 3\
- Tailstock Dead Center Height (Min – Max): 1-7/16\
- Operation: Manual
- Rotary Table Dia.: 3-1/8\
- Brand: AUZAAR
Rotary Table Horizontal Vertical 4 slots 4 / 100mm High Quality premium. H, Q
4 / 100mm Rotary Table Horizontal Vertical 4 Slots. Table: 4 Diameter or 100mm. Table Height: 1 5/8. Center Height in Vertical Position: 1. Operates in the Horizontal or Vertical position. Hand Wheel calibrated to 10 degrees per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. The holiday season is the busiest shopping period of the year, don? Our catalog covers every festival including Thanksgiving, Black Friday, Cyber Monday, Christmas. Please do visit our store and get yourself a treat. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “baani_pk” and is located in this country: IN. This item can be shipped worldwide.
- Brand: Unbranded
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
Rotary Table Horizontal Vertical 4 slots 4 / 100mm High Quality premium. H, Q. /
4 / 100mm Rotary Table Horizontal Vertical 4 Slots. Table: 4 Diameter or 100mm. Table Height: 1 5/8. Center Height in Vertical Position: 1. Operates in the Horizontal or Vertical position. Hand Wheel calibrated to 10 degrees per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. The holiday season is the busiest shopping period of the year, don? Our catalog covers every festival including Thanksgiving, Black Friday, Cyber Monday, Christmas. Please do visit our store and get yourself a treat. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “baani_pk” and is located in this country: IN. This item can be shipped worldwide.
- Brand: Unbranded
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
3 Inch Round Vice Mounted on 3 Inch Horizontal and Vertical Rotary Table 4 Slots
ROTARY TABLE 3″ / 75 MM WITH 3″ / 75 MM ROUND VICE. 3 Inch (75 mm) Rotary Table’s is a Precision Small Rotary Table for Milling operation. Its Table Diameter is 3 or (75 mm) with 4 slots. Worm- Gear Ratio – 36:1. 1 handle rotation shall turn the table by 10 Degrees. Table graduated in 360 Degrees & the scale calibrated in 5 degree increment. Can be used in both horizontal & vertical position. Fits our 3 (75 mm) Rotary Tables perfectly. Vice is Made from High Grade Casting. For Rotary Table & Vertical Slide. Vice Diameter 3 (75mm). Grooved Vee On Movable Jaws. With 2 Clamping Nuts. Vice is drilled in a manner that these can fit to a 3 as well 4 slot table. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Our product is manufactured by us, we do not compromise on quality, the quality is the best you can ever get, kindly refer to the photos. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial-tools” and is located in this country: IN. This item can be shipped worldwide.
- Tilting: No
- Brand: Unbranded
- Setting Position: Horizontal/Vertical
- FREE SHIPPING: USA,UK,FRANCE,GERMANY,SPAIN,ITALY
- Country/Region of Manufacture: India
New Rotary Table 3/75 mm Horizontal Vertical Low profile Ratio 361 Pack of 2Pc
Table Dia:- 3/75mm. T-Slot :- M 5. Gear Ratio:- 36:1. Weight :- 4.4Kgs / 9.68Lbs. Can be used in both Precision ground Horizontal & Vertical Position. Graded cast iron and precision ground. The work table is graduated to full 360 degree. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed usually horizontal or vertical. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. Term & Conditions. The colour of item can be vary depend upon availability. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in this country: IN. This item can be shipped worldwide.
- Tilting: No
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Tee Slot: M 5
- Table Dia: 3\
- Modified Item: No
- Country/Region of Manufacture: India
- Operation: Manual
- Weight of Pack: 4.4 Kgs / 9.68 Lbs
- Gear Ratio: 36:1
- Brand: Unbranded
- Cross-Slide: No