machine
Hv4 (110 MM Diameter) Horizontal Vertical Rotary Table For Milling Machine







Diameter of the Table is 110 mm, known as HV4 since it can be clamped both horizontally and vertically. Table Height: 80 mm (3 -1/8) Worm Gear Ratio – 1:90, which means that 1 handle rotation shall turn the table by 4 Degrees. Center Bore of the Table MT2 Table Graduated 360 Degrees. Handwheel graduated in seconds. 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. Vernier scale calibrated to 10 secondsquick release system for manual indexing. The item “HV4 (110 MM DIAMETER) HORIZONTAL VERTICAL ROTARY TABLE FOR MILLING MACHINE” is in sale since Monday, August 13, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “globaltools2016″ and is located in Delhi, Delhi. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- MPN: Does Not Apply
- Brand: globaltools2016
- Non-Domestic Product: No

Milling Machine Heavy Duty 4 Inch Tilting Rotary Table Horizontal And Vertical








Milling Machine Heavy Duty 4 Inch Tilting Rotary Table Horizontal And Vertical. 6 in L x 6 in W x 5/8 in H Rough Estimation. 12 Pounds Rough Estimation. Table Measures 2-5/8 Inch High Horizontal Position. Table Rotation: 360 Degrees. Four 5/16 Inch T-slots. 1:36 Hand Wheel Ratio. 5 Minute Scale Resolution And Ball Bearing Rotary Support. The item “Milling Machine Heavy Duty 4 Inch Tilting Rotary Table Horizontal And Vertical” is in sale since Monday, April 1, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “mhglobal” and is located in Monrovia, California. This item can be shipped to United States.
- MPN: Does Not Apply
- Brand: Unbranded
- California Prop 65 Warning: WARNING: This products contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. ADVERTENCIA: Este producto coniene productos quimcos reconocidos por el estado de California que provocan cáncer, defectos de nacimiento u otros danos reproductivos

HD 4” Rotary Table with Tilting Base Horizontal & Vertical Milling Machine








Heavy Duty 4” Rotary Table with Tilting Base Horizontal. Heavy duty high quality 4” Tilting rotary table. Features 360 degree table rotation, four 5/16 T-slots, 1:36 hand wheel ratio, 5 minute scale resolution and ball bearing rotary support. Table measures 2-5/8 high in the horizontal position. This 4 Rotary Table offers the added benefit and flexibility of a 90 degree tilting base. 6”L x 6”W x 5/8”H estimate only. 12 lbs estimate only. THANK YOU FOR VISITING. The item “HD 4” Rotary Table with Tilting Base Horizontal & Vertical Milling Machine” is in sale since Tuesday, April 9, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “prolinemax” and is located in Los Angeles, California. This item can be shipped to United States, Canada.
- MPN: N/A
- Brand: Unbranded/Generic
- California Prop 65 Warning: WARNING: This products contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. ADVERTENCIA: Este producto coniene productos quimcos reconocidos por el estado de California que provocan cáncer, defectos de nacimiento u otros danos reproductivos

Bodee 8 Horizontal and Vertical Rotary Machine Table






Table Diameter: 7-7/8 (200mm), Center Taper MT3. Diameter of Center Hole: 55/64 (22mm). Height of center for Vert. Width of T-Slot: 35/64 (14mm). Adjacent angle of T-Slot: 90 degree. Width of locating key: 5/8 (16mm). Indexing Accuracy: 45 sec. Vernier scale reading: 10 sec. One rotation of the handle moves the table 4 degree. Gear Ratio: 90:1. Use on milling machines for circular cutting, angle settings, boring and spot facing, table surface and rotating parts are ground for smooth operation. Table Diameter : 7-7/8 (200mm), Gear Ratio: 90:1. Diameter of Center Hole: 55/64 (22mm), Center Taper MT3. Mounting: 5 – 5/16 (135mm). Number of T-Slot: 4, Width of T-Slot: 35/64 (14mm). 15.7 × 14.6 × 7.5 in. The item “Bodee 8 Horizontal and Vertical Rotary Machine Table” is in sale since Monday, July 8, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolots” and is located in Cerritos, California. This item can be shipped to United States.
- Brand: Bodee
- MPN: Does Not Apply
- Model: BD0301003

Horizontal Vertical HV6- 4 slots Rotary Table 6 (150 mm) for Milling Machine




Manufactured from High grade seasoned casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. The item “Horizontal Vertical HV6- 4 slots Rotary Table 6 (150 mm) for Milling Machine” is in sale since Saturday, August 4, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “globaltools2016″ and is located in Delhi, Delhi. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- MPN: Does Not Apply
- Brand: globaltools2016
- Non-Domestic Product: No

HV6 6 Inch Horizontal & Vertical Rotary Working Table Mill & Drill Machine HighQ













HV6 6 Inch Horizontal & Vertical Rotary Working Table Mill & Drill Machine HighQ. Which ensures durability and long service life. The vertical&horizontal rotary table is one of the main accessory of milling machine. It can be used for indexing drilling or milling, circumferential cutting, boring a hole and spot facing on milling machine. When rotary table in vertical with tailstock working together, it can used on complex work for circular indexing drilling and milling. Enjoys strong stability and wonderful performance. Condition: 100% Brand new. Material: Nodular Cast Iron. Size: As Shows in Pictures. Colors: As Shows in Pictures. Center height: 100mm / 3.94in. Center hole diameter: 18mm / 0.71in. Table surface diameter: 150mm / 5.91in. Spindle connection size: 18mm / 0.71in. T-groove width: 14mm / 0.55in. Location key width: 16mm / 0.63in. Indexing accuracy: 60 (s). Repetition accuracy: 60 (s). Applicable Machine Tool: Milling Machine. Please allow slight error due to manual measurement and make sure you do not mind before ordering. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item “HV6 6 Inch Horizontal & Vertical Rotary Working Table Mill & Drill Machine HighQ” is in sale since Thursday, February 28, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “goodseverybuy” and is located in Hongkong. This item can be shipped worldwide.
- Brand: Unbranded
- Material: Nodular Cast Iron
- Model: HV6
- MPN: Does Not Apply

HV-4 TSL100 Vertical & Horizontal Rotary Table for Milling Machine






HV-4 TSL100 Vertical & Horizontal Rotary Table for Milling Machine. Mini H/V rotary table is one of the main accessories of DIY and home use milling machines, it is use for index boring, milling, circle cutting, spot and boring hole etc on milling machine. Rotary table in vertical with tailstock working together, it can used on complex work for circle index boring and milling. Specification of HV-4: Table diameter. 110mm Morse taper of the center hole: MT2 Height of center for vertical mounting: 81.5mm Width of the T-slot: 12mm Adjacent angle of table T-slot: 120. Width of the locating key: 12mm Module of the worm gear: 1 Transmission ratio of the worm gear: 1:72 Graduation of the table: 360. Rotating angle of table with one revolution of the worm: 5. Bearing(with table Hor): 150kg Max. Bearing(with table Vert): 75kg. Morse taper of the center hole. Height of center for vertical mounting. Width of the T-slot. Adjacent angle of table T-slot. Width of the locating key. Module of the worm gear. Transmission ratio of the worm gear. Graduation of the table. Rotaring angle of table with one revolution of the worm. 4°(1′ per graduation). Minimum value of vernier. Bearing(with table Hori). Bearing(with table Verti). 1 x HV-4 TSL100 Vertical & Horizontal Rotary Table. Unused/unopened merchandise will be fully credited. All emails will be answered within 24 hours. The item “HV-4 TSL100 Vertical & Horizontal Rotary Table for Milling Machine” is in sale since Friday, May 17, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “sandatong” and is located in Shenzhen. This item can be shipped worldwide.
- Model: HV-4 TSL100
- Country/Region of Manufacture: China
- MPN: SA2017070321
- Brand: MIERSI
- Featured Refinements: Milling Machine

Horizontal Vertical HV6 Rotary Table (150 mm -6 Inches) for Milling Machine


Manufactured from High grade seasoned casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1 Center Bore MT-2 T Slot 16mm Horizontal Height. Approx 80mm from Base to Top surface of Chuck Satin Chrome Dials Graduated 360 degree around its circumference. The item “Horizontal Vertical HV6 Rotary Table (150 mm -6 Inches) for Milling Machine” is in sale since Wednesday, August 8, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “globaltools2016″ and is located in Delhi, Delhi. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- MPN: Does Not Apply
- Brand: globaltools2016
- Non-Domestic Product: No

HV6 150mm Vertical and Horizontal Rotary Working Table Dia Mill&Drill Machine













HV6 150mm Vertical and Horizontal Rotary Working Table Dia Mill&Drill Machine. Which ensures durability and long service life. The vertical&horizontal rotary table is one of the main accessory of milling machine. It can be used for indexing drilling or milling, circumferential cutting, boring a hole and spot facing on milling machine. When rotary table in vertical with tailstock working together, it can used on complex work for circular indexing drilling and milling. Enjoys strong stability and wonderful performance. Condition: 100% Brand new. Material: Nodular Cast Iron. Size: As Shows in Pictures. Colors: As Shows in Pictures. Center height: 100mm / 3.94in. Center hole diameter: 18mm / 0.71in. Table surface diameter: 150mm / 5.91in. Spindle connection size: 18mm / 0.71in. T-groove width: 14mm / 0.55in. Location key width: 16mm / 0.63in. Indexing accuracy: 60 (s). Repetition accuracy: 60 (s). Applicable Machine Tool: Milling Machine. Please allow slight error due to manual measurement and make sure you do not mind before ordering. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item “HV6 150mm Vertical and Horizontal Rotary Working Table Dia Mill&Drill Machine” is in sale since Thursday, February 28, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industry_mall” and is located in Hongkong. This item can be shipped worldwide.
- Brand: Unbranded
- Material: Nodular Cast Iron
- Model: HV6
- MPN: Does Not Apply
