ROTARY_TABLE_3_4_slots_with_2_1_2_SELF_CENTRING_CHUCK_HORIZONTAL_VERTICAL_01_jgd

ROTARY TABLE 3-4 slots with 2.1/2 SELF CENTRING CHUCK HORIZONTAL VERTICAL

ROTARY TABLE 3-4 slots with 2.1/2 SELF CENTRING CHUCK HORIZONTAL VERTICAL
ROTARY TABLE 3-4 slots with 2.1/2 SELF CENTRING CHUCK HORIZONTAL VERTICAL

ROTARY TABLE 3-4 slots with 2.1/2 SELF CENTRING CHUCK HORIZONTAL VERTICAL
3- 75 MM. HIGH QUALITY ITEM Precision 3 Tilting Rotary Table supplied with Mounting Back Plate and 65 mm 3 Jaw Self centering Lathe chuck. The Rotary Table can be tilting up to 90 degrees. Precision Mini Rotary Table 3 75 mm is manufactured from Seasoned casting. Precisely maintained Chuck Run Out and Bottom Surface for accurate work. Table graduated 0-360 degrees in 5 degree divisions. Winding handle is graduated 0-10 degrees in 5 minute divisions. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. Drilling or milling to polar co-ordinates and, when mounted vertically with a tail stock they can be used to machine shafts or spindles. The versatile units can also be used on drilling, boring or slotting machines permitting an even greater range of operations. Machining – To establish the initial work piece position simply loosen the zero Collar locking handle and rotate the zero collar anti-clockwise for about half A turn. The worm is now disconnected from the worm wheel drive, the table is Free to turn independently to the crank handle and the work piece may now be Accurately aligned. To re-engage simply turn the zero collar in the clockwise Direction and re-tighten the locking handle. A rotary table can be used. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. TERMS & CONDITIONS. All our items are delivered to your doorstep. All items will reach you within 8 to 12 days, in most cases we have seen our customers receiving them within a week. We will try our level best to serve you excellent. We are a upcoming online retailer for Engineering Tools, Machine Tools Accessories, Cutting Tools, Measuring Instruments, Diamond Tools, etc. We have wide range of Engineering Supplies and We also make Tools as per specifications. We are here to serve you 24 x 7. The Items we supply are Quality and at low rates as we are manufacturing most of the items. The item “ROTARY TABLE 3-4 slots with 2.1/2 SELF CENTRING CHUCK HORIZONTAL VERTICAL” is in sale since Tuesday, May 12, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “quickfox_1820″ and is located in DELHI, DELHI. This item can be shipped worldwide.
  • Brand: DUSHKA
  • MPN: RT-3-75
  • Model: RT-3-75TLT
  • Country of Manufacture: India
  • Country/Region of Manufacture: India

ROTARY TABLE 3-4 slots with 2.1/2 SELF CENTRING CHUCK HORIZONTAL VERTICAL
centring, chuck, horizontal, rotary, self, slots, table, vertical
next page
Rotary_Table_4_Tilting_4slot_65_Mm_Self_Centering_Chuck_Back_plate_2_Tnuts_01_dgoa

Rotary Table 4 Tilting 4slot + 65 Mm Self Centering Chuck +Back plate & 2 Tnuts

Rotary Table 4 Tilting 4slot + 65 Mm Self Centering Chuck +Back plate & 2 Tnuts
Rotary Table 4 Tilting 4slot + 65 Mm Self Centering Chuck +Back plate & 2 Tnuts
Rotary Table 4 Tilting 4slot + 65 Mm Self Centering Chuck +Back plate & 2 Tnuts

Rotary Table 4 Tilting 4slot + 65 Mm Self Centering Chuck +Back plate & 2 Tnuts
Rotary Table 4 Tilting. Hor/vert Rotary Table 4. Table height 66 mm in flat position. Table graduated 360 degrees in 5 degree divisions. Base is 145 mm x 126 mm with two 10 mm mounting holes separated by 110 mm. The table tilts upto 90 degrees and can be used. 65 mm Self Centering Chuck with 65mm Backplate. Our Chuck is Hardened and ground working surfaces prolong life while ensuring continuous accuracy and repeatability. Both sides of the jaw teeth and guides are ground and hardened to HRC 58-62. Each set of jaws are serialised in their own set. Supplied with 80mm Backplate suitable for 65 mm self centering chuck. The item “Rotary Table 4 Tilting 4slot + 65 Mm Self Centering Chuck +Back plate & 2 Tnuts” is in sale since Tuesday, July 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial-tools” and is located in Jhilmil Industrial Area Delhi. This item can be shipped worldwide.
  • Country/Region of Manufacture: India
  • Setting Position: Horizontal/Vertical
  • Tilting: Yes
  • MPN: Does Not Apply
  • Brand: Unbranded

Rotary Table 4 Tilting 4slot + 65 Mm Self Centering Chuck +Back plate & 2 Tnuts
4slot, back, centering, chuck, plate, rotary, self, table, tilting, tnuts
next page
360_Rotary_5_Line_Laser_Level_Red_Laser_Self_Leveling_Vertical_Horizontal_Level_01_vskb

360 Rotary 5 Line Laser Level Red Laser Self Leveling Vertical Horizontal Level

360 Rotary 5 Line Laser Level Red Laser Self Leveling Vertical Horizontal Level
360 Rotary 5 Line Laser Level Red Laser Self Leveling Vertical Horizontal Level
360 Rotary 5 Line Laser Level Red Laser Self Leveling Vertical Horizontal Level
360 Rotary 5 Line Laser Level Red Laser Self Leveling Vertical Horizontal Level
360 Rotary 5 Line Laser Level Red Laser Self Leveling Vertical Horizontal Level
360 Rotary 5 Line Laser Level Red Laser Self Leveling Vertical Horizontal Level
360 Rotary 5 Line Laser Level Red Laser Self Leveling Vertical Horizontal Level
360 Rotary 5 Line Laser Level Red Laser Self Leveling Vertical Horizontal Level
360 Rotary 5 Line Laser Level Red Laser Self Leveling Vertical Horizontal Level
360 Rotary 5 Line Laser Level Red Laser Self Leveling Vertical Horizontal Level

360 Rotary 5 Line Laser Level Red Laser Self Leveling Vertical Horizontal Level
This product is widely used in construction and building, such as bricklaying, cutting plates, decoration, ect. It casts horizontal or vertical benchmark lines in working. Its high-accuracy and speedy assures the quality of construction and make the process of construction convenient. Self leveling and beyond the scope of automatic alarm function. Can rotate 360 degrees to instrument, make a beam of light to any areas of need. 1x laser level meter 4x 2A battery 1x Carry Box 1x L shape bracket 1x user manual. The item “360 Rotary 5 Line Laser Level Red Laser Self Leveling Vertical Horizontal Level” is in sale since Sunday, December 29, 2019. This item is in the category “Business & Industrial\Test, Measurement & Inspection\Other Test, Measurement & Inspection”. The seller is “igosig” and is located in China. This item can be shipped worldwide.
  • Brand: Unbranded/Generic
  • Country/Region of Manufacture: China
  • MPN: Does Not Apply

360 Rotary 5 Line Laser Level Red Laser Self Leveling Vertical Horizontal Level
horizontal, laser, level, leveling, line, rotary, self, vertical
next page
ROTARY_TABLE_4_100mm_WITH_80mm_3_JAW_SELF_CENTERING_CHUCK_M6_CLAMPING_KIT_01_ghj

ROTARY TABLE 4/100mm WITH 80mm 3 JAW SELF CENTERING CHUCK & M6 CLAMPING KIT

ROTARY TABLE 4/100mm WITH 80mm 3 JAW SELF CENTERING CHUCK & M6 CLAMPING KIT
ROTARY TABLE 4/100mm WITH 80mm 3 JAW SELF CENTERING CHUCK & M6 CLAMPING KIT
ROTARY TABLE 4/100mm WITH 80mm 3 JAW SELF CENTERING CHUCK & M6 CLAMPING KIT
ROTARY TABLE 4/100mm WITH 80mm 3 JAW SELF CENTERING CHUCK & M6 CLAMPING KIT

ROTARY TABLE 4/100mm WITH 80mm 3 JAW SELF CENTERING CHUCK & M6 CLAMPING KIT
Rotary Table Horizontal & Vertical 4 / 100 mm with. 80 mm Lathe Chuck & BackPlate for Milling Machine. Rotary Table has 4 Tee Slots. Chuck Diameter : 100 mm / 4. Vertical center Height : 2-1/16 (Approx 51 mm). Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. Calibrated in 5 Min Increment around the rim. Can be used both Vertical & Horizontal. This set includes 80 mm Self Centering Chuck with Backplate and mounting T-Nuts and Bolts. CLAMPING KIT M 6. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “ROTARY TABLE 4/100mm WITH 80mm 3 JAW SELF CENTERING CHUCK & M6 CLAMPING KIT” is in sale since Wednesday, July 1, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolsforexperts” and is located in Delhi, DELHI. This item can be shipped worldwide.
  • Country/Region of Manufacture: India
  • Setting Position: Horizontal/Vertical
  • Tilting: No
  • Operation: Manual
  • MPN: Does Not Apply
  • Brand: Unbranded

ROTARY TABLE 4/100mm WITH 80mm 3 JAW SELF CENTERING CHUCK & M6 CLAMPING KIT
4100mm, 80mm, centering, chuck, clamping, rotary, self, table
next page
4_100mm_Rotary_Table_65mm_4_Jaw_Self_Centering_Chuck_Back_Plate_free_shipng_01_bg

4 100mm Rotary Table + 65mm 4 Jaw Self Centering Chuck + Back Plate free shipng

4 100mm Rotary Table + 65mm 4 Jaw Self Centering Chuck + Back Plate free shipng
4 100mm Rotary Table + 65mm 4 Jaw Self Centering Chuck + Back Plate free shipng
4 100mm Rotary Table + 65mm 4 Jaw Self Centering Chuck + Back Plate free shipng
4 100mm Rotary Table + 65mm 4 Jaw Self Centering Chuck + Back Plate free shipng
4 100mm Rotary Table + 65mm 4 Jaw Self Centering Chuck + Back Plate free shipng
4 100mm Rotary Table + 65mm 4 Jaw Self Centering Chuck + Back Plate free shipng

4 100mm Rotary Table + 65mm 4 Jaw Self Centering Chuck + Back Plate free shipng
4 ROTARY TABLE WITH MT-2 Bore. High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 105 mm. Vertical center height 75 mm. One turn = 5 degrees table graduated 360 degrees. Center Has a MT-2 Taper. Quick Release System for Manual Indexing. And Has 3 Tee Slots. 4 100mm Rotary Table + 65mm 4 Jaw Self Centering Chuck + Back Plate. Table Height: 52 mm (2- 1/16 inch). Table graduated in 360 Degrees. The scale calibrated in 5 degree increment. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Quality 4 jaw self centering chuck 65mm Diameter. Backplate is drilled and counterboared to fit a range of 3″ and 4″ rotary tables with 3 Slots or a 4 Slots. The item “4 100mm Rotary Table + 65mm 4 Jaw Self Centering Chuck + Back Plate free shipng” is in sale since Tuesday, January 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “easystreet_hangout” and is located in DASNA, UTTAR PRADESH. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Custom Bundle: No
  • Setting Position: Horizontal/Vertical
  • Tilting: No
  • Threaded:: M14x1
  • Table Dia.:: 4″ (100mm)
  • table height:: 52mm
  • Table Graduate: 0-360 Degree
  • Operation: Manual
  • MPN: Does Not Apply
  • Cross-Slide: No
  • Brand: Unbranded

4 100mm Rotary Table + 65mm 4 Jaw Self Centering Chuck + Back Plate free shipng
100mm, 65mm, back, centering, chuck, free, plate, rotary, self, shipng, table
next page
Laser_Level_5_Line_6Point_360_Rotary_Self_Leveling_Green_Red_Horizontal_Vertical_01_rhs

Laser Level 5 Line 6Point 360 Rotary Self Leveling Green Red Horizontal Vertical

Laser Level 5 Line 6Point 360 Rotary Self Leveling Green Red Horizontal Vertical
Laser Level 5 Line 6Point 360 Rotary Self Leveling Green Red Horizontal Vertical
Laser Level 5 Line 6Point 360 Rotary Self Leveling Green Red Horizontal Vertical
Laser Level 5 Line 6Point 360 Rotary Self Leveling Green Red Horizontal Vertical
Laser Level 5 Line 6Point 360 Rotary Self Leveling Green Red Horizontal Vertical
Laser Level 5 Line 6Point 360 Rotary Self Leveling Green Red Horizontal Vertical

Laser Level 5 Line 6Point 360 Rotary Self Leveling Green Red Horizontal Vertical
Tilt / Slash Function: Arbitrary Angle Of a Straight Line (Press the ON/OFF button for about 3 seconds, then the laser can be locked). Pulse Transmission: Up to 50M(164 feet) outdoor with optional detector or receiver. Automatic Alert: Automatically Make Beep Sound If It Is Not Horizontally Placed Within 3 Degrees. Laser Enhance: Press The “OUTDOOR” Key, The Power Of The Eight Lines Will Be Doubled. AC And DC Double Use: The New Circuit Design, Communication Power Supply And Support DC Power Supply. 1 x Laser Level 5 Lines 6 Points (No including the battery). 1 x Carrying Box. The item “Laser Level 5 Line 6Point 360 Rotary Self Leveling Green Red Horizontal Vertical” is in sale since Saturday, March 7, 2020. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Measuring & Layout Tools\Laser Measuring Tools”. The seller is “viktoras.v” and is located in Hongkong. This item can be shipped worldwide.
  • Size: As specification
  • Model: Does Not Apply
  • Colour: Green
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Item Height: Does Not Apply
  • Item Width: Does Not Apply
  • Material: Aluminum Alloy Chassis + Engineering Plastics
  • Unit Quantity: 1
  • Type: Rotary Lasers
  • Features: Self-leveling
  • Manufacturer Colour: green
  • MPN: LaserLevel001
  • Measuring Technology: Laser
  • Measurement Model: 5 lines
  • Precision: 5+/-1mm
  • Wavelength: 635nm
  • Unit Type: Unit
  • Item Weight: Does Not Apply
  • Brand: Unbranded
  • Manufacturer Warranty: None
  • Item Diameter: Does Not Apply

Laser Level 5 Line 6Point 360 Rotary Self Leveling Green Red Horizontal Vertical
6point, green, horizontal, laser, level, leveling, line, rotary, self, vertical
next page
4_100_MM_Rotary_Table_horizontal_Vertical_tailstock_round_Vice_50_MM_4_Jaw_Self_01_asee

4/100 MM Rotary Table+horizontal Vertical+tailstock+round Vice+50 MM 4 Jaw Self

4/100 MM Rotary Table+horizontal Vertical+tailstock+round Vice+50 MM 4 Jaw Self
4/100 MM Rotary Table+horizontal Vertical+tailstock+round Vice+50 MM 4 Jaw Self
4/100 MM Rotary Table+horizontal Vertical+tailstock+round Vice+50 MM 4 Jaw Self
4/100 MM Rotary Table+horizontal Vertical+tailstock+round Vice+50 MM 4 Jaw Self
4/100 MM Rotary Table+horizontal Vertical+tailstock+round Vice+50 MM 4 Jaw Self
4/100 MM Rotary Table+horizontal Vertical+tailstock+round Vice+50 MM 4 Jaw Self

4/100 MM Rotary Table+horizontal Vertical+tailstock+round Vice+50 MM 4 Jaw Self
Description of 4 (100 mm) Rotary Table Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. DETAILS OF ROUND VICE: Made of high grade close grain caste Iron. The moving jaw has V-grooves to hold Round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Supplied with a Suitable Tailstock , Clamp kit & a Chuck with Back Plate & Fixing T nuts CHUCK BODY IS CASTE IRON AND JAWS ARE HARDENED STEEL. The item “4/100 MM ROTARY TABLE+HORIZONTAL VERTICAL+TAILSTOCK+ROUND VICE+50 MM 4 JAW SELF” is in sale since Thursday, May 9, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolswholesale” and is located in Delhi, Delhi. This item can be shipped worldwide.
  • MPN: Does Not Apply
  • Brand: Unbranded

4/100 MM Rotary Table+horizontal Vertical+tailstock+round Vice+50 MM 4 Jaw Self
rotary, self, tablehorizontal, verticaltailstockround, vice50
next page
Rotary_360_Laser_Lines_Level_Self_Leveling_Beam_Cross_Line_Horizontal_Vertical_01_juv

Rotary 360° Laser Lines Level Self Leveling Beam Cross Line Horizontal Vertical

Rotary 360° Laser Lines Level Self Leveling Beam Cross Line Horizontal Vertical
Rotary 360° Laser Lines Level Self Leveling Beam Cross Line Horizontal Vertical
Rotary 360° Laser Lines Level Self Leveling Beam Cross Line Horizontal Vertical
Rotary 360° Laser Lines Level Self Leveling Beam Cross Line Horizontal Vertical
Rotary 360° Laser Lines Level Self Leveling Beam Cross Line Horizontal Vertical
Rotary 360° Laser Lines Level Self Leveling Beam Cross Line Horizontal Vertical
Rotary 360° Laser Lines Level Self Leveling Beam Cross Line Horizontal Vertical
Rotary 360° Laser Lines Level Self Leveling Beam Cross Line Horizontal Vertical
Rotary 360° Laser Lines Level Self Leveling Beam Cross Line Horizontal Vertical
Rotary 360° Laser Lines Level Self Leveling Beam Cross Line Horizontal Vertical
Rotary 360° Laser Lines Level Self Leveling Beam Cross Line Horizontal Vertical
Rotary 360° Laser Lines Level Self Leveling Beam Cross Line Horizontal Vertical

Rotary 360° Laser Lines Level Self Leveling Beam Cross Line Horizontal Vertical
Seesii Laser Level, 3x 360 Degree Self-Leveling Vertical Horizontal Line, Green Beam Cross Line Laser, 100FT Measuring Range, with Magnetic Bracket, Base and Remote Control for Picture Hanging, Flooring, Outdoor Construction. 3X 360° LASER LINE. One 360° horizontal and two 360° vertical lines provide all-around leveling coverage in floor, wall, ceiling all around the room. Equipped with 2pcs laser windows, which can project lasers closing to the floor at a distance of 6mm (to the wall: 7mm), more accurate and stable. Smart pendulum system allows the multi-functional laser tool to self level and indicate out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle. The laser level projects green light beam which is brighter than standard red beams with a working range up to 100Ft with ±1mm at 23Ft accuracy. The service time can be extended to nearly 32 hours with 4pcs large capacity 18650 rechargeable batteries. Besides, the batteries can also be directly charged via the USB charger (included). DURABLE & COMPACT DESIGN. IP54 waterproof and dustproof level ensure you work well under harsh working conditions. Strong magnetic wall bracket and 1/4 mounting thread is provided to meet different fixing methods. Equipped with lifting platform base, the height is adjustable from 0.98 to 3.42 inch. Horizontal / vertical lines can be selected individually or simultaneously depends on job site applications. You can switch it via remote controller or touch button. Ideal for picture hanging, outdoor construction, flooring, paving tiles, installing photo, door, window and furniture carpentry, etc. Leveling Angle: 3x 360°. Leveling Accuracy: ±1mm at 23Ft. Distance to Wall: 7mm. Distance to Floor: 6mm. Working Temperature: 14122 / -1050. Operating Time: 8 hours per battery. Power Supply: Built-in 4pcs 18650 batteries. Laser Class: Class I (IEC/EN60825-1/2014). 1x Seesii Laser Level. The item “Rotary 360° Laser Lines Level Self Leveling Beam Cross Line Horizontal Vertical” is in sale since Tuesday, December 3, 2019. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Measuring & Layout Tools\Laser Measuring Tools”. The seller is “itsconstucting” and is located in Leicester. This item can be shipped to all countries in Europe, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Indonesia, Malaysia, Mexico, Singapore, South Korea, Taiwan, Thailand, Bangladesh, Belize, Bolivia, Brunei darussalam, Dominica, Ecuador, Egypt, Guadeloupe, Grenada, French guiana, Cambodia, Saint kitts and nevis, Macao, Martinique, Nicaragua, Pakistan, Peru, Paraguay, Turks and caicos islands, Aruba, Saudi arabia, United arab emirates, Chile, Bahamas, Costa rica, Dominican republic, Guatemala, Honduras, Kuwait, Panama, Philippines, Qatar, El salvador, Trinidad and tobago, Uruguay, Viet nam.
  • MPN: Does Not Apply
  • Brand: Seesii
  • Type: Cross-Line Laser Level,Laser Level,Line Laser Level
  • Leveling Angle: 3x 360°
  • Distance to Wall: 7mm
  • Waterproof Level: IP54
  • Working Distance: 100Ft/30M
  • Operating Time: 8 hours per battery
  • Laser Class: Class I (IEC/EN60825-1/2014), <1mW power output
  • Bundle Listing: No
  • Leveling Accuracy: ±1mm at 23Ft
  • Distance to Floor: 6mm
  • Remote Control: Support
  • Working Temperature: 14~122 / -10~50
  • Power Supply: Built-in 4pcs 18650 batteries

Rotary 360° Laser Lines Level Self Leveling Beam Cross Line Horizontal Vertical
beam, cross, horizontal, laser, level, leveling, line, lines, rotary, self, vertical
next page
Bosch_GRL4000_80CHVK_18V_Self_Leveling_Horizontal_Vertical_Rotary_Laser_Kit_01_qmyv

Bosch GRL4000-80CHVK 18V Self Leveling Horizontal/Vertical Rotary Laser Kit

Bosch GRL4000-80CHVK 18V Self Leveling Horizontal/Vertical Rotary Laser Kit
Bosch GRL4000-80CHVK 18V Self Leveling Horizontal/Vertical Rotary Laser Kit
Bosch GRL4000-80CHVK 18V Self Leveling Horizontal/Vertical Rotary Laser Kit
Bosch GRL4000-80CHVK 18V Self Leveling Horizontal/Vertical Rotary Laser Kit
Bosch GRL4000-80CHVK 18V Self Leveling Horizontal/Vertical Rotary Laser Kit
Bosch GRL4000-80CHVK 18V Self Leveling Horizontal/Vertical Rotary Laser Kit
Bosch GRL4000-80CHVK 18V Self Leveling Horizontal/Vertical Rotary Laser Kit
Bosch GRL4000-80CHVK 18V Self Leveling Horizontal/Vertical Rotary Laser Kit

Bosch GRL4000-80CHVK 18V Self Leveling Horizontal/Vertical Rotary Laser Kit
Bosch GRL4000-80CHVK 18V Self Leveling Horizontal/Vertical Rotary Laser Kit. The fully-featured rotary laser has Dual Dial-In Slope, CORE18V power, Bluetooth connectivity, UC user-calibration and more. Dual Dial-In Slope allows slope angle adjustment on both the X and Y axes. Dual Power Source for extended runtime and option of a 4.0 Ah CORE18V battery or a battery adapter with four (D) cell batteries. Durable design engineered with a cage rubber over-mold and an innovative handle design to stand up to the toughest job sites; built to IP68 dust- and water-protection standards. Bluetooth connectivity connects to a mobile device, linking to the free Bosch Leveling Remote App, to control sleep mode, Dual Dial-In Slope, and more. UCAL user-calibration guiding the user step-by-step to confirm tool status or calibrate the rotary laser to ensure accuracy on the Jobsite. Long working range a range of up to 4,000 Ft. With laser receiver, the laser accuracy of up to 1/16 In. In horizontal mode and 1/8 In. Vertical-beam functionality provides a vertical beam at 90-degree point for layout, squaring and plumb applications. Electronic self-leveling allows for easy setup and use on the job. Disturbance monitor indicates if tool position changes, ensuring consistent leveling accuracy. The variable-speed and scan-angle selection allows for maximum visibility at different lighting conditions. Comprehensive kit includes a remote control, 18V 4.0 Ah battery and charger, alkaline battery adapter, wall mount, laser receiver, aluminum tripod, sturdy grade rod, and durable hard carrying case. What’s in The Box. GRL4000-80CHV 18V REVOLVE4000 Connected Self-Leveling Horizontal/Vertical Rotary Laser. LR40 Laser Receiver with Bracket. GBA18V40 18V CORE18V Lithium-Ion 4.0 Ah Compact Battery. BA1 Alkaline Battery Adapter. BT170 Heavy-Duty Aluminum Tripod. 30 Day Satisfaction Guaranteed. 1/16 in at 100 ft Horizontal Mode 1/8 in at 100 ft vertical mode. Self-Leveling up to 5 degree. 14 F/-10 C 1 22 F/50 C. Up to 4000 ft. WHY FACTORY AUTHORIZED OUTLET? SECURE & HASSLE FREE SHOPPING. All our sales are backed by a 30-Day Satisfaction Guarantee. Products shown as available are normally stocked but inventory levels cannot be guaranteed. The item “Bosch GRL4000-80CHVK 18V Self Leveling Horizontal/Vertical Rotary Laser Kit” is in sale since Wednesday, May 27, 2020. This item is in the category “Home & Garden\Tools & Workshop Equipment\Other Tools & Workshop Equipment”. The seller is “factory_authorized_outlet” and is located in Ontario, California. This item can be shipped to United States, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Bahrain, Croatia, Malaysia, Brazil, Chile, Panama, Jamaica, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay.
  • Brand: BOSCH
  • MPN: GRL4000-80CHVK
  • Model: GRL4000-80CHVK

Bosch GRL4000-80CHVK 18V Self Leveling Horizontal/Vertical Rotary Laser Kit
bosch, grl4000-80chvk, horizontalvertical, laser, leveling, rotary, self
next page
Horizontal_Vertical_Milling_Indexing_4_100_Rotary_Table_50_MM_4_Jaw_Self_Chuck_01_hf

Horizontal Vertical Milling Indexing 4/100 Rotary Table 50 MM 4 Jaw Self Chuck

Horizontal Vertical Milling Indexing 4/100 Rotary Table 50 MM 4 Jaw Self Chuck
Horizontal Vertical Milling Indexing 4/100 Rotary Table 50 MM 4 Jaw Self Chuck
Horizontal Vertical Milling Indexing 4/100 Rotary Table 50 MM 4 Jaw Self Chuck
Horizontal Vertical Milling Indexing 4/100 Rotary Table 50 MM 4 Jaw Self Chuck
Horizontal Vertical Milling Indexing 4/100 Rotary Table 50 MM 4 Jaw Self Chuck

Horizontal Vertical Milling Indexing 4/100 Rotary Table 50 MM 4 Jaw Self Chuck
4 (100 mm) Rotary Table Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx) excluding chuck. Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. Description of the 50 mm 4 jaws Independent Chuck made from High Quality chuck, the body of which is made from SG Iron & Jaws are of Tool steel hardened & ground. Supplied with a mounting back plate & fixing tee nuts with screws. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table. The item “HORIZONTAL VERTICAL MILLING INDEXING 4/100 ROTARY TABLE 50 MM 4 JAW SELF CHUCK” is in sale since Thursday, May 9, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Chucks\Drill Chucks”. The seller is “toolswholesale” and is located in India. This item can be shipped worldwide.
  • MPN: Does Not Apply
  • Brand: Unbranded

Horizontal Vertical Milling Indexing 4/100 Rotary Table 50 MM 4 Jaw Self Chuck
chuck, horizontal, indexing, milling, rotary, self, table, vertical
next page