head
US? CNC Rotary 4th Axis dividing head 61 K11-80mm 3 jaw Chuck +65mm Tailstock
US? CNC Rotary 4th Axis dividing head 6:1 K11-80mm 3 jaw Chuck +65mm Tailstock. Within one days handing time via UPS. 1 x Rotary 4th Axis K11-80mm (With chuck and Motor). 1 x 65mm Tailstock. Engraving machine 4th axis (A axis, Rotational Axis, CNC dividing head) gapless harmonic reducer gearbox. Chuck type: K11-80 (3 jaw centering chuck). Angle: 0.3°/ step. Gear box output shaft diameter: 20mm. Reducing ratio: 6:1. Stepper motor: Nema23 57mm 3A 2-phase 4 wire. Accessories: Set of Anti-claw and wrenches. The fourth axis parameter settings. Mach3 system settings: the pulses required for 1°. (Motor 1 lap pulses x Driver fine fraction x Reduction ratio) ÷ 360°. 57mm 2- phase stepper motor, fine fraction of 16, reduction ratio 100:1. (200 x 16 x 100) / 360=888.88888888. Weihong system settings: 1 pulse along the angle. 360°/(Motor 1 lap pulses x Driver fine fraction x Reduction ratio). 360 / (200 x 16 x 100) =0.001125. Nema 23 stepper motor L76mm. Shaft length: 25.5mm. Ambient Temperature: -20 c–+50 c. Insulation Resistance: 100MOhm(500V DC). Top tip: Activity type. Axial locking wrench for tailstock. Please give us the opportunityto resolve any problem when you have, we concern your problem and we will try our best to resolve it. Customer’s satisfaction is very important to us. Stock? K11-100mm 3-Jaw Chuck Rotational Axis 4th Axis CNC Engraving Machine. Stock? Rotary 4th Four Axis 3 Jaw Chunk K11-100mm & 65mm Tailstock For CNC. Stock? Rotary Axis 50:1,4th axis 3 Jaw Chuck K11-100+tailstock for CNC Router. Stock? Rotary 4th axis 3 Jaw Chuck K11-100 50:1&65mm tailstock for CNC Router. Stock? Rotary 4th Axis 3 Jaw Chuck 50:1 K11-100 65mm tailstock for CNC Router. Stock? Rotary 4th Axis 50:1 K11-100 3 Jaw with 65mm Tailstock for CNC Router. Stock? 4th Axis Rotary K11-100 3 Jaw 50:1 with 65mm Tailstock for CNC Router. Stock? 4th rotary axis 3 Jaw 50:1 K11-100 with 65mm Tailstock for CNC Router. Stock? New CNC Router Rotary Axis 4th K11-100 3 Jaw Chuck & 65mm Tailstock. Stock? Rotary 3 Jaw Chuck 4th Axis K11-100mm + 65mm Tailstock for CNC Router. Stock? Rotary 4th Axis 3 Jaw Chuck K11-100mm+65mm Tailstock For CNC Router. Stock? K11-100mm 3 Jaw Rotation A axis, 4th Axis, 65mm Tailstock for CNC Router. Stock? K11-100mm, Rotary 4th Axis, Rotation-axis, 3 Jaw+65mm Tailstock CNC Kit. Stock? K11-100mm, Rotationa A-axis, Rotary 4th Axis, 3 Jaw+Tailstock CNC Router. Stock? K11-100mm, Rotary axis, Fourth 4th Axis, 3 Jaw+Tailstock For CNC Router. Stock? K11-100mm Rotational axis, 4th Fourth Axis 3 Jaw Chuck for CNC Router. K11-100mm Fourth A axis Rotary 4th Axis 3 Jaw Chuck Tailstock For CNC Router. K11-100mm CNC Router Rotation axis, Fourth 4th Axis 3 Jaw Chuck tailstock 50:1. Rotaty axis 4th Axis K11 100mm 3 jaw chuck for CNC Router Ratio 50:1 harmonic. K11 100mm Rotary Fourth 4th Axis 3 Jaw Chuck&tailstock Ratio 50:1 for CNC Router. K11 100mm Rotational A Axis 4th Axis 3 Jaw Chuck Ratio 100:1 for CNC Router. CNC Router Rotaty Axis 4th Axis K11-100mm 3 jaw chuck Ratio 100:1 harmonic. Stock? Rotary 4th Axis K11-100mm 3 Jaw Chuck + 65mm Tailstock For CNC Router. K11-100mm Rotation 4th Axis 3 Jaw Chuck Ratio 100:1 for CNC Router Machine. Rotational Fourth 4th Axis 3 Jaw Chuck K11-100mm for CNC Router Ratio 100:1. Rotation Fourth Gapless 4th Axis 3 Jaw Chuck K11-100mm 100:1+65mm Tailstock. K11-100mm 4th Axis Rotation Fourth Gapless 3 Jaw Chuck 100:1 +65mm Tailstock. US? Fourth 4th Axis Gapless Rotation 3 Jaw K11-100mm Chuck 50:1+65mm Tailstock.
Brown & Sharpe Dividing Head Rotary Indexing Machinist Tool
Center line 6 chuck would be better if u need one i might have usa not shure on brand.
Indexing Disc Rotary Table Indexing Head Vertical and Horizontal Indexing
Original indexing disc rotary table indexing head. Horizontal dual-purpose indexing disc with chuck Milling machine rotary table. Vertical and horizontal type. 4′ Disc Diameter 110mm. Indexing error 360° error of 0.04°. Turbine and worm gear speed ratio 1:72. Vertical centre height 85.5mm.
L-W Chuck Co. Precision Universal Tilting Dividing Head
L-W tilting rotary indexing chuck in excellent condition. Includes 3 indexing plates.
5th Axis 4th A C Axis Dividing Head Harmonic Rotary Indexing gear box 501
I bought this for my DIY but it was too small for I wanted to do. It worked great when I had it hooked up to my CNC controller. Questions welcome thanks for looking.
4 inch 100 mm Rotary Table Tilting Dividing Head &Adjustable Tilting Tailstock
4 inches 100mm Tilting 0°- 90° Rotary Table Milling Machine Tool. 4 100mm Tilting Rotary Table. Features to Tilt between 0 – 90 degrees and can be locked at any position. Table diameter 100mm table is graduated 360 degrees. Worm gear ratio 1:36 which means that 1 handle rotation shall turn the table by 10 degrees. Centre height in vertical position: 2-5/8 (66mm approx) hand wheel is graduated in division of 10 minuend can be set at Zero. Can be mounted in Horizontal & Vertical position. Tip hardness [HRC] 40 – 45. Material tip C45E steel. Net weight [kg] 2.4. Center height [mm] 45 – 80. Tip Ø [mm] 15. Dimensions base [mm] 140 X 57. Total height [mm] 155. Thanks to the height-adjustable tip, this tailstock is suitable for dividing heads whose center of the rotary table is between 45 and 80 mm in a vertical position. In order to achieve a horizontal alignment of the workpiece, it is clamped between the dividing head and the tailstock. The tailstock center is fixed at the set height using a clamping screw, and the horizontal position of the center can also be secured by clamping. The lateral adjustment of the centering tip is made possible by a knurled rotary knob. The horizontal travel of the tip is 27 mm.
Cincinnati Milling Machine Dividing Head Change Gears Low Lead Gearbox Machinist
Set of change gears for a Cincinnati Milling Machine. The following change gears are included in this set, along with the wooden box. This Cincinnati Milling Machine Dividing Head Change Gears Low Lead Gearbox is a reliable and efficient tool for any machinist. The unit is made in the United States and features a horizontal/vertical setting position, manual operation, and a brand name of CINCINNATI. The unit type is a single unit and it comes equipped with a variety of features including dividing head change gears, low lead gearbox, and rotary tables. This item is perfect for those in the business and industrial industry, specifically in the CNC, metalworking, and manufacturing fields. Don’t miss out on the opportunity to add this high-quality tool to your workholding and toolholding collection.