plate
16 Precision Horizontal Rotary Table with A Dividing Plate
Diameter of table: 15.748 (400 mm). Morse taper center hole: MT4. Diameter of center hole: 1.5748″ x 0.3937″. Width of T slot: 0.7086. Width of locating key: 0.7086. Transmission ratio of worm gear: 1:90. Readout of hand wheel: 1′ per graduation. Minimum value of vernier: 10. Maximum working load: 662 lbs (horizontally). Surface to center slot squareness 0.0003″ Taper center bore concentricity TIR 0.0005″ Surface to base parallelism 0.0008″ Surface to angle face squareness 0.0004″ Cylinder center bore concentricity TIR 0.001 10 second vernier reading Dividing Plate is optional. The item “16 Precision Horizontal Rotary Table with A Dividing Plate” is in sale since Friday, October 30, 2015. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “topqc0987″ and is located in Norcross, Georgia. This item can be shipped to United States.
- MPN: 535-3400
- Brand: Universal
Precision 6 Rotary Table With Indexing Plate Set, Tailstock & M8 Clamping Kit
Precision Rotary Table 6/150mm. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Graduated 360 degree around its circumference. CLAMPING KIT SET M8. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. Tailstock for Rotary Table 6. Its made of good Quality of Cast Iron. Height is adjustable from 80 mm to 110 mm. It is used on our HV4 & HV6 ROTARY TABLE. It is USED WHEN BETWEEN CENTRE WORK IS REQUIRED. THESE ARE ADJUSTABLE FOR DIFFERENT HEIGHTS & Having fine feed centre point. And the centre tip is hardened and Ground. INDEXING PLATES SET FOR HV4 & HV6. Fit to our HV4 and HV6, Tilting Rotary Tables 100 mm. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. The item “PRECISION 6 ROTARY TABLE WITH INDEXING PLATE SET, TAILSTOCK & M8 CLAMPING KIT” is in sale since Tuesday, July 21, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolsforexperts” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Brand: Unbranded
VERTEX HV-12 12 Horizontal / Vertical Rotary Table with Face Plate
VERTEX HV-12 12 Horizontal / Vertical Rotary Table with Face Plate. HV-12 In wooden crate. If You have any questions regarding this item, please let us know we’ll be happy to help. The item “VERTEX HV-12 12 Horizontal / Vertical Rotary Table with Face Plate” is in sale since Tuesday, July 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped to United States.
- Brand: VERTEX
- MPN: HV-12
- Country/Region of Manufacture: Taiwan
- Manufacturer: VERTEX
- Model: HV-12
VERTEX HV-6 (4-Slot) 6 Horizontal/Vertical Rotary Table with 4-Slot Face Plate
VERTEX HV-6 (4-Slot) 6 Horizontal/Vertical Rotary Table with 4-Slot Face Plate. Vertex HV-6 Horizontal/Vertical Rotary Table Special order with 4-slot face plate. Our Tables are made of high density Meehanite and use “HEIDENHAIN” electronic equipment to inspect angle to assure the excellent quality and durableness. Use excellent machining center to process. Spindle end be applied accuracy bearing. Can be assured to keep very steady under load cutting. Worm is hardened and ground. The ratio is 90:1. The work table is graduated a full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1’min. And vernier scale makes settings down to 10 seconds possible. These Rotary Tables are popular for their excellent performance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work. Using the Key guide block, the center can be corrected quickly and accurately. If You have any questions regarding this item, please let us know we’ll be happy to help. The item “VERTEX HV-6 (4-Slot) 6 Horizontal/Vertical Rotary Table with 4-Slot Face Plate” is in sale since Tuesday, July 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped worldwide.
- Brand: VERTEX
- MPN: HV-6-4-SLOT
- Country/Region of Manufacture: Taiwan
- Model: HV-6-4-SLOT
Rotary Table 4 Tilting 4slot + 65 Mm Self Centering Chuck +Back plate & 2 Tnuts
Rotary Table 4 Tilting. Hor/vert Rotary Table 4. Table height 66 mm in flat position. Table graduated 360 degrees in 5 degree divisions. Base is 145 mm x 126 mm with two 10 mm mounting holes separated by 110 mm. The table tilts upto 90 degrees and can be used. 65 mm Self Centering Chuck with 65mm Backplate. Our Chuck is Hardened and ground working surfaces prolong life while ensuring continuous accuracy and repeatability. Both sides of the jaw teeth and guides are ground and hardened to HRC 58-62. Each set of jaws are serialised in their own set. Supplied with 80mm Backplate suitable for 65 mm self centering chuck. The item “Rotary Table 4 Tilting 4slot + 65 Mm Self Centering Chuck +Back plate & 2 Tnuts” is in sale since Tuesday, July 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial-tools” and is located in Jhilmil Industrial Area Delhi. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: Yes
- MPN: Does Not Apply
- Brand: Unbranded
Hv6 Rotary Table With 150mm Independent Chuck+diving Plate Set & M8 Clamping Kit
HV6 Rotary Table with Dividing Plate Set, and. 150mm 4 Jaw Independent Chuck. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. T Slot 16 mm. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. 150 mm Independent Chuck & Backplate. A high Quality 4 Jaw Independent chuck, the body of chuck is made from SG Iron & Jaws are of Tool steel hardened & ground. Same Jaws are reversible as well. CLAMPING KIT SET M8. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “HV6 ROTARY TABLE WITH 150MM INDEPENDENT CHUCK+DIVING PLATE SET & M8 CLAMPING KIT” is in sale since Thursday, July 2, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolsforexperts” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Brand: Unbranded
6 Rotary table Horizontal & Vertical (3 Slots) WithDividing/Indexing Plate set
Precision Rotary Table 6/150mm. With Dividing Plate Set. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. T Slot 16 mm. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. The item “6 Rotary table Horizontal & Vertical (3 Slots) WithDividing/Indexing Plate set” is in sale since Thursday, June 11, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “zealfortools” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Bundle Listing: No
- Weight: 13Kg
- Model: Rotary Table 6″ H&V
- Country/Region of Manufacture: India
- MPN: Does Not Apply
- Brand: SARAL TOOLS
- Colour: Black Wrinkle
- ROTARY TABLE, LATHE CHUCK: ROTARY TABLE, LATHE CHUCK
VERTEX HV-10 10 Horizontal / Vertical Rotary Table with Face Plate (6 Slots)
VERTEX HV-10 10 Horizontal / Vertical Rotary Table with Face Plate (6 Slots). Our Tables are made of high density Meehanite and use “HEIDENHAIN” electronic equipment to inspect angle to assure the excellent quality and durableness. Use excellent machining center to process. Spindle end be applied accuracy bearing. Can be assured to keep very steady under load cutting. Worm is hardened and ground. The ratio is 90:1. The work table is graduated a full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1’min. And vernier scale makes settings down to 10 seconds possible. These Rotary Tables are popular for their excellent performance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work. Using the Key guide block, the center can be corrected quickly and accurately. If You have any questions regarding this item, please let us know we’ll be happy to help. The item “VERTEX HV-10 10 Horizontal / Vertical Rotary Table with Face Plate (6 Slots)” is in sale since Wednesday, July 1, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped worldwide.
- Brand: VERTEX
- MPN: HV-10
- Country/Region of Manufacture: Taiwan
- Model: HV-10
Precision Quality 6 Rotary Table With Indexing Plate Set & M8 Clamping Kit
Precision Rotary Table 6/150mm. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Graduated 360 degree around its circumference. CLAMPING KIT SET M8. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. INDEXING PLATES SET FOR HV4 & HV6. Fit to our HV4 and HV6, Tilting Rotary Tables 100 mm. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. The item “PRECISION QUALITY 6 ROTARY TABLE WITH INDEXING PLATE SET & M8 CLAMPING KIT” is in sale since Friday, June 26, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “expert.tools” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Table graduated: 360 degrees
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Unbranded
4 100mm Rotary Table + 65mm 4 Jaw Self Centering Chuck + Back Plate free shipng
4 ROTARY TABLE WITH MT-2 Bore. High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 105 mm. Vertical center height 75 mm. One turn = 5 degrees table graduated 360 degrees. Center Has a MT-2 Taper. Quick Release System for Manual Indexing. And Has 3 Tee Slots. 4 100mm Rotary Table + 65mm 4 Jaw Self Centering Chuck + Back Plate. Table Height: 52 mm (2- 1/16 inch). Table graduated in 360 Degrees. The scale calibrated in 5 degree increment. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Quality 4 jaw self centering chuck 65mm Diameter. Backplate is drilled and counterboared to fit a range of 3″ and 4″ rotary tables with 3 Slots or a 4 Slots. The item “4 100mm Rotary Table + 65mm 4 Jaw Self Centering Chuck + Back Plate free shipng” is in sale since Tuesday, January 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “easystreet_hangout” and is located in DASNA, UTTAR PRADESH. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Tilting: No
- Threaded:: M14x1
- Table Dia.:: 4″ (100mm)
- table height:: 52mm
- Table Graduate: 0-360 Degree
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Unbranded